• 2000 HAAS MINI MILL VMC HB-20602

    $27,500 - Bethlehem, PA, USA
    • Manufacturer: Haas

    length (total): 36″ length (work surface): 28.75″ width: 12″ maximum weight on table: 500 lbs t-slot width: .625″ number of t-slots: 3 center distance: 4.92″ taper size: # 40 taper speed: 0 – 6,000...

  • 2000 HAAS MINI MILL VMC HB-20603

    $27,500 - Bethlehem, PA, USA
    • Manufacturer: Haas

    length (total): 36″ length (work surface): 28.75″ width: 12″ maximum weight on table: 500 lbs t-slot width: .625″ number of t-slots: 3 center distance: 4.92″ taper size: # 40 taper speed: 0 – 6,000...

  • 2001 HAAS MINI MILL VMC HB-20604

    $27,500 - Bethlehem, PA, USA
    • Manufacturer: Haas

    length (total): 36″ length (work surface): 28.75″ width: 12″ maximum weight on table: 500 lbs t-slot width: .625″ number of t-slots: 3 center distance: 4.92″ taper size: # 40 taper speed: 0 – 6,000...

  • 2000 HAAS MINI MILL VMC HB-20605

    $27,500 - Bethlehem, PA, USA
    • Manufacturer: Haas

    length (total): 36″ length (work surface): 28.75″ width: 12″ maximum weight on table: 500 lbs t-slot width: .625″ number of t-slots: 3 center distance: 4.92″ taper size: # 40 taper speed: 0 – 6,000...

  • 1994 FADAL VMC20 VMC CK-20546

    $9,500 - Bethlehem, PA, USA
    • Manufacturer: Fadal

    cutting feed rate (x/y/z): .01”-250” (375” at 150%) rapid feed rate (x/y/z): 400 ipm axis drive motor (x/y/z): dc, 1,800 lb thrust ballscrew size (x/y/z): 1.25” diameter x axis: 20” y-axis: 16” z-a...

  • 2004 FADAL 4020HT VMC CK-20545

    $22,500 - Bethlehem, PA, USA
    • Manufacturer: Fadal

    cutting feed rate (x/y/z): .01″ – 400 ipm (600″ at 150%) rapid feed rate (x/y/z): 900 ipm (x, y) 700 (z) axis drive motor (x/y/z): ac 3,800 lbs (peak) thrust longitudinal (x-axis): 40″ cross (y-axi...

  • 2011 HAAS VF-3YT/50 VMC TK-20591

    $59,500 - Bethlehem, PA, USA
    • Manufacturer: Haas

    length:  52″ width:  23″ table capacity:  4,000 lbs drive: 40 hp, vector speed:  7,500 rpm taper:  cat-50 maximum torque: 236 ft-lb @ 700 rpm, 340 ft-lb @ 575 rpm drive system: 2-speed geared head ...

  • 1997 LEADWELL MV-610 VMC HB-20188

    $21,500 - Bethlehem, PA, USA
    • Manufacturer: Leadwell

    x-axis: 24″ y-axis: 16.1″ z-axis: 20″ spindle nose to table: 5.1” – 25.2” spindle center to column: 17.7” spindle center to table center: + 8.1” table center to column: 9.64” – 25.8” spindle taper:...

  • 1996 HARDINGE CONQUEST VMC700 VMC CK-19884

    $12,500 - Bethlehem, PA, USA
    • Manufacturer: Hardinge

    length: 40″ width: 19″ weight on table (max.): 1,650 lbs t-slot size (width x no. x pitch): .688″ x 4 x 3.937″ fixture location keyways (width x no.): .688″ x 3 floor to table surface distance: 33....

  • 2001 HARDINGE VMC800II VMC TK-19514

    $29,500 - Bethlehem, PA, USA
    • Manufacturer: Hardinge

    width: 20.00” length: 36.40” load capacity: 1,540 lbs t-slots (# & size): .708” x 3 x 6.3” taper: 40 speed range: 10,000 rpm transmission: belted motor (cont/peak): 10 /15 hp max torque at base spe...