Building Filters
- Trusted Seller
FRITZ WERNER FP7V2 #0309623
- Manufacturer: Fritz Werner
Spindle face to table center: 9.5" TO 13.5" | Spindle speeds: (16) 12 TO 560 RPM | Spindle motors (each): 50 HP | Spindle taper: 60 ISO | Diameter of quill: 12" | Quill travel: 12-1/2" | Quill advance & retract:...
Toledo, OH - Trusted Seller
Werner Lehara 1- Meter Double Oven Line for Biscotti/Macaroons
- Manufacturer: Werner Lehara
Werner Lehara 1- Meter Double Oven Line for Biscotti/Macaroons - Werner Lehara 1-Meter Wire-cut/Depositor with assorted dies - 9 dies: (15) 1” round, (20) 1” round, (10) 2” long x 1/2” oval, (30) 1/2” round, (1...
Pennsylvania, USA - Trusted Seller
Hein-werner 20 Ton Hydraulic Jack - J-20
- Manufacturer: Hein
Name: Hydraulic Jack | Arrival date: 11-05-2025 | Dimensions l x w x h (inches): 48 x 36 x 12 | Capacity: 20 TON | Weight (lb.): 185 | Available quantity: 1
$100 USDEuclid, OH 
Werner & Pfleiderer Twin Screw Extruder
- Manufacturer: WP
One (1) Used Werner & Pfleiderer 58mm Twin Screw Extruder, twin screw compounder, continuous mixer, 16:1 L/D, Type Continua 58, Reliance Motor 25HP DC 1750RPM 500V, Gearbox rated for 40HP, co-rotating, 3 heating ...
Cleveland, OH- Trusted Seller
Werner Candy Depositors
- Manufacturer: Werner
Werner, automatic, dual counter rotating roll, dough sheeter / extruder with amount of product per hour – depending on materials and application. Equipped with 24" long x 13" wide x 8" deep product hopper, (2) 8...
Carol Stream, IL - Trusted Seller
WERNER & PFLEIDERER ZSK20
- Manufacturer: WP
- Model: ZSK20
Used 40mm Werner & Pfleiderer co-rotating Twin Screw Extruder. Model ZSK40, serial #180399, new 1990. Has 46/1 L/D vented barrel with 11-barrel sections and a 41" centerline height. Driven by 50 hp 500 volt 1750/...
Hainesport, NJ - Trusted Seller
2003 WERNER & PFLEIDERER ZSK20
- Manufacturer: WP
- Model: ZSK20
Used 20mm Werner & Pfleiderer model ZSK20 co-rotating twin screw extruder. Has 40/1 L/D barrel at 43" centerline height driven through a 3:1 gearbox with a 37-Newton meter torque capacity per screw shaft. Extrude...
Hainesport, NJ - Trusted Seller
Werner & Pfleiderer ZDS-K28
- Manufacturer: WP
Used Werner Pfleiderer Twin Screw Extruder. Model ZDS-K28, Serial number 513991, Fab. no. 163805, built 1978. Co-rotating Screws, side by side. 28 mm screws. Screw length: 31" long(787.4mm) center of feed throat ...
Red Bank, NJ - Trusted Seller
Werner & Pfleiderer Mixer Paste Double Arm ¾ GAL
- Manufacturer: WP
Werner & Pfleider, Model 0.1 ft³ (¾ gallon) working capacity, jacketed, 304 stainless steel, double arm, sigma blade mixer with pounds of product per hour – depending on materials and application. Inner mixing ch...
Carol Stream, IL - Trusted Seller
Werner Pfleiderer Mixer Paste Double Arm ¾ GAL
- Manufacturer: WP
Werner & Pfleider, Model 0.1 ft³ (¾ gallon) working capacity, jacketed, 316 stainless steel, double arm, sigma blade mixer with pounds of product per hour – depending on materials and application. Inner mixing ch...
Carol Stream, IL - Trusted Seller
Werner Lehara / Baker Perkins Bakery Equipment Depositors
- Manufacturer: Baker Perkins
Werner Lehara 18" wide depositor with number and pounds of product per hour – depending on materials and application. Stainless steel contact parts. Equipped with 18" wide x ___" long Intralox product conveyor __...
Carol Stream, IL - Trusted Seller
Werner & Pfleiderer Extruder Twin Screw ZSK-57-W50P
- Manufacturer: WP
Werner & Pfleiderer, Co-rotating twin screw, 57mm carbon steel compounding extruder with optional high torque drive rated at up to 350 kg per hour – depending on materials and application. L to D ratio 34:1 Equip...
Carol Stream, IL - Trusted Seller
Werner & Pfleiderer Mixer Paste Double Arm C/S JKTD TILT
- Manufacturer: WP
33 cu ft carbon steel, jacketed, double arm tilt mixer. Equipped with 2 piece hinged cover, Naben type mixing blades, jacketed body and hollow mixer blades for hot oil, or water cooling supply and (4) 1-1/4" jack...
Carol Stream, IL - Trusted Seller
Item No: 27059Werner Lehara 1-Meter Wire-Cut/Depositor With Assorted Dies -Biscotti
- Manufacturer: Werner Lehara
This Machine Can Be Used To Wire-Cut, Deposit Directly On The Steel Belt As Well As Create Continuous Ribbons Of Product To Be Cut Later By The Band Saw {Biscotti}. – (15) 1″ Round – (20) 1″ Round – (10) 2″ Long ...
- Trusted Seller
Werner & Pfleiderer ZSK58 F96 Extruder - IPP# 210304
- Manufacturer: WP
twin screw extruder Electric heated barrel with water cooled jacket 84” long (Consisting of 9 blocks each 9.45"), 2.2” diameter discharge Rated for 96 Kpm torque per shaft or 960Nm Outer screw diameter is 57.8 mm...
Princeton Junction, NJ 
Fritz Werner 8.101 Milling Machine
- Manufacturer: Fritz Werner
- Model: 8.101
Good condition Fritz Werner 8.101 Milling Machines. Located in Italy and other countries. Click request price for more information.
Italy