AMERICAN MAPLAN 510 CUT OFF 18519
- Manufacturer: Maplan
One (1) used American Maplan model 510 air traveling pipe/profile saw. S/N 130099. Set up for right to left operation. Manufactured in 1992. Includes portable dust collector.Was paired with stock no. 18518 when i...
Elk Grove Village, IL- Trusted Seller
AMERICAN MAPLAN V2-125-V/2L
- Manufacturer: Maplan
Used Battenfeld vacuum/cooling tank. Type V2-125-V/2L, serial #83-4058-67-01. Has 14" x 14" cross section x 18' long chamber with 10" opening. Includes (1) vacuum pump and (2) water pumps. (1) vacuum pump missing...
Hainesport, NJ 
AMERICAN MAPLAN / BATTENFELD P160BVE 14540
- Manufacturer: Maplan
American Maplan / Battenfeld model P160BVE profile puller. S/N 0075-67-20. 2001 model year. 480-volt input. Touch pad controls. 2 belts with 6″ x 56″ long contact area. Each belt powered by individual 1.4 kw moto...
Elk Grove Village, IL
AMERICAN MAPLAN 503 PROFILE PULLER 18518
- Manufacturer: Maplan
Used American Maplan model 503 cleat type puller. S/N 13009. Set up for 9 1/4″ wide cleats with 120″ belt contact length. Chain driven with dual pneumatic gap adjustment. System includes drives and controls on un...
Elk Grove Village, IL- Trusted Seller
MAPLAN 527
- Manufacturer: Maplan
Used Maplan Type 527 vacuum/cooling tank. New 1999. Vacuum tank has 18" wide X 12" deep X 20' long stainless steel chamber. Includes (3) vacuum pumps and (1) water pump. Includes operator controls. Has flat plexi...
Hainesport, NJ 
60mm American Maplan Single Screw Extruder
- Manufacturer: Maplan
60mm American Maplan Single Screw Extruder 25:1 L/D 40 HP Siemens Motir Includes Screw Baumuller b maxx 4000 drive Nord Gear Box 15.56 gear ratio
Rockville Centre, NY
AMERICAN MAPLAN DSK 62 EXTRUSION LINES (2) ALL DOWNSTREAM
- Manufacturer: Maplan
AMERICAN MAPLAN DSK 62 EXTRUDER – MODEL DSK 62 – DC – 1987 (TWO AVAILABLE) DOWNSTREAM: CALIBATING TABLE – ACTUAL DOWNSTEAM 4 meter – MODEL AKT4 – AC – 1987 (TWO AVAILABLE) DOWNSTREAM: PULLER/SAW – ACTUAL PULLER...
Rockville Centre, NY- Trusted Seller
8" W x 120" L Maplan Cleated Belt Puller
- Manufacturer: Maplan
Used 8" W x 120" L Maplan Cleated Belt Puller Model 503 20 FPM Max Speed Dual Pneumatic Holddown Cylinders Motorized Raise, Ft/Min Gauge, Torq % Gauge 30A, 480V 42" Centerline S/N 129973
United States - Trusted Seller
8" Wide x 120" Maplan Cleated Belt Puller, Dual 5hp Motors
- Manufacturer: Maplan
Used 8" W x 120" L Maplan Cleated Belt Puller, Model 503 4" Max Profile Height, 3" Vertical Adjustment Independent Drives, 5 Hp Black Max Marathon Motors With Cone Gearboxes, Dual Pneumatic Hold-down Cyclers Moto...
United States 
AMERICAN MAPLAN 257″ X 18″ 16646
- Manufacturer: Maplan
American Maplan model 520, 257″ X 18″ vacuum sizing tank, S/N 130253.
Elk Grove Village, IL
2002 Maplan 160ton Injection Machine
- Manufacturer: Maplan
Maplan 160ton Injection Machine Injection MTF 750/160 Platen size = 510mm x 450mm Stripper plate/ejectors =top only Max gap between platens = 575mm Volume = 750 ccm3 Tonnage = 160T Year 2002
Borehamwood, United Kingdom
2007 Maplan 250ton Injection Machine
- Manufacturer: Maplan
Maplan 250ton Injection Machine Injection MTF 1500/250 Platen size = 630mm x500mm Stripper plate/ejectors =top only Max gap between platens = 702mm Volume = 1500 ccm3 Tonnage = 250T Year 2007
Borehamwood, United Kingdom
2010 Maplan Rubber Injection Moulding Machine
- Manufacturer: Maplan
Maplan Injection Moulding Machine 80 Ton Safety distance 162mm Run-on time 81ms Follow-up 5mm Pattern size 510mm x 410mm Touch screen control Year 2010
Borehamwood, United Kingdom- Trusted Seller
2016 MAPLAN MFT 750/160 edition S
- Manufacturer: Maplan
This MAPLAN MFT 750/160 edition S was manufactured in 2016. It is a vertical injection moulding machine, ideal for precision plastic processing. Contact us for more information. Connected load: 84 kw Nominal volt...
Germany 
Maplan Injection presses
- Manufacturer: Maplan
plates 510x400 mm clamping force 150 t max. injected volume 750 cc clearance 440 mm
Zubří, Czech Republic
Tip: Enter manufacturer, model or keyword