Used Matec in Germany

Matec Zeta APS

• Manufacturer: Matec

Matec Appl. Sciences Acoustic Particle Size Analyzer Zeta APS. Used to measure particle size distribution (PSD) and zeta potential (ZP). Enables simultaneous measurement of the spectrum of sound velocity, pH, con...

Matec ESA 9800

• Manufacturer: Matec

Matec Zeta Potential Analyzer ESA 9800. For measurement and determination of surface charges. Zeta potential in aqueous suspensions. With flow cell. Company: Matec Model: ESA 9800 Comment: Documents English. The ...

2000 matec matec

• Manufacturer: Matec

matec 2000 matec 90HV 30HVS matec 20A 30HV Matec

Matec Virotech Apollo 42/2

• Manufacturer: Matec

Matec Virotech Apollo 42/2. Gerät zur Abarbeitung von WesternBlot- und Line-Streifen. Mit Monitor, Tastatur, Netzteil, Abfallbehälter und Software. 220 V. 50 Hz. Firma: Matec Modell: Virotech Apollo 42/2 Kommenta...

2004 MATEC 30 L / 6000

• Manufacturer: Matec
• Model: 30 L 6000

Type of control: CNC | Control: HEIDENHAIN iTNC 530 | X-travel: 6000 mm | Y-travel: 800 mm | Z-travel: 600 mm | Spindle taper: SK 50 | Table load: 3000 kg | Max. workpiece weight: 800 kg | Spindle speed: 20 - 90...

MATEC 25 L CNC Vertical Machining Center

Control: HEIDENHAIN TNC 426 Tool holder SK 40 Table dimensions: 1160 x 500 mm with three grooves, travel X-axis: approx. 900mm Travel Y axis: 500 mm Travel Z axis: approx. 500mm The machine is equipped with a too...

MATEC 30 L CNC Vertical Machining Center - 1998

• Manufacturer: Matec

Machine number: 0152 Operating voltage: 400V Connection: 3.8 kW Control: HEIDENHAIN Feed force Y-axis: 6600 N Feed force X and Z axis: 9500 N Rapid traverse speed: 30 m/min Programmable feed: 30,000 mm/min Tool h...

2008 Matec HV 2000

• Manufacturer: Matec

Control: Heidenhain iTNC 530 X travel [mm]: 2,000 Y travel [mm]: 600 Z travel [mm]: 800 Dimensions (LxWxH) (mm): approx. 7,500 x 4,500 x 3,100 mm Weight (kg): approx. 11,000 Spindle: Max. speed: 10,000 rpm Max....

2010 Matec 30 HV

• Manufacturer: Matec
• Model: 30 HV

This 5-axis Matec 30 HV mill-turn centre was manufactured in 2010. It features a traveling column with 3,000 mm X-axis travel, 600 mm Y-axis, and 800 mm Z-axis. The B-axis swivels ±105° and the C-axis rotates 360...

MATEC 30 L CNC Vertical Machining Center -1999

• Manufacturer: Matec

Machine number: 0247 Travel X-axis: 3000mm Travel Y axis: 420 mm Travel Z axis: 400 mm Speed range: from 20 to 6000 rpm Tool holder: SK 40 Control: HEIDENHAIN TNC 426 Table dimensions: 3500 x 750 mm with 7 groove...

1998 Matec 30 L

• Manufacturer: Matec
• Model: 30 L

This 4-axis Matec 30 L gantry milling machine was manufactured in 1998. Consider the opportunity to buy this Matec 30 L gantry milling machine. Contact us for more information. Machine Benefits Technical Machine ...

2000 Matec 30 HV CNC

• Manufacturer: Matec

This 5-axis Matec 30 HV CNC milling machine was manufactured in 2000. It features a milling spindle with a speed range of 20-9,000 rpm and a drilling capacity in St 60 of 60mm. The machine boasts large travel dis...