2012 MATEC 50 HV machining center – Universal
- Manufacturer: Matec
Machine with SIEMENS 840 D control B-axis +/- 105° with clamping 2400 Nm SEMPUCO rotary table as NC axis 600 mm diameter dividing head with swivel bridge Sph 400 mm tool changer 60-fold Clamping bridge 2000 × 630...
Cologne, Germany- Trusted Seller
Germany - Trusted Seller
2004 MATEC 30 L / 6000
- Manufacturer: Matec
- Model: 30 L 6000
Type of control: CNC | Control: HEIDENHAIN iTNC 530 | X-travel: 6000 mm | Y-travel: 800 mm | Z-travel: 600 mm | Spindle taper: SK 50 | Table load: 3000 kg | Max. workpiece weight: 800 kg | Spindle speed: 20 - 90...
Halberstadt, Germany MATEC 30 HV traveling column milling machine
- Manufacturer: Matec
NC swivel head: Sauter swiveling +/- 90 degrees Pitch +/- 3 arc seconds Fully encapsulated working area Loading doors suitable for crane loading Automatic opening Movable partition wall Coolant system: Internal c...
Cologne, Germany
CNC vertical machining centre MATEC type 30 HV
- Manufacturer: Matec
- Model: 30 HV
CNC vertical machining centre, make: MATEC, type: 30 HV, new in 2003, serial no.: 554, XYZ: 2000 x 600 x 800 mm, with clamping table/dividing head, 3-jaw chuck, HEIDENHAIN CNC control, drive power 60 kW, with...
Ahaus, Germany- Trusted Seller
2008 Matec HV 2000
- Manufacturer: Matec
Control: Heidenhain iTNC 530 X travel [mm]: 2,000 Y travel [mm]: 600 Z travel [mm]: 800 Dimensions (LxWxH) (mm): approx. 7,500 x 4,500 x 3,100 mm Weight (kg): approx. 11,000 Spindle: Max. speed: 10,000 rpm Max....
Baienfurt, Germany 
2008 MATEC 30 HV/K
- Manufacturer: Matec
- Model: 30 HVK
2022 Spindle overhaul 5-axis BAZ With: - HEIDENHAIN iTNC530 control - swivel head +/- 105 - electronic handwheel; - NC rotary table integrated (dia. 630mm) - Coolant system; coolant through the spindle 40bar - pa...
Monheim am Rhein, Germany- Trusted Seller
2010 Matec 30 HV
- Manufacturer: Matec
- Model: 30 HV
This 5-axis Matec 30 HV mill-turn centre was manufactured in 2010. It features a traveling column with 3,000 mm X-axis travel, 600 mm Y-axis, and 800 mm Z-axis. The B-axis swivels ±105° and the C-axis rotates 360...
Germany - Trusted Seller
1998 Matec 30 L
- Manufacturer: Matec
- Model: 30 L
This 4-axis Matec 30 L gantry milling machine was manufactured in 1998. Consider the opportunity to buy this Matec 30 L gantry milling machine. Contact us for more information. Machine Benefits Technical Machine ...
Germany - Trusted Seller
2000 Matec 30 HV CNC
- Manufacturer: Matec
This 5-axis Matec 30 HV CNC milling machine was manufactured in 2000. It features a milling spindle with a speed range of 20-9,000 rpm and a drilling capacity in St 60 of 60mm. The machine boasts large travel dis...
Germany - Trusted Seller
1997 Matec 30 HV
- Manufacturer: Matec
- Model: 30 HV
Manufacturer: Matec Model: 30 HV Year of Manufacture: 1997 Type of Machine : 5-axis CNC vertical machining center - Well-maintained condition. - Working area: X = 2000 mm, Y = 600 mm, Z = 800 mm. - Equippe...
Germany 
2003 Matec / 5 axles 30 HV
- Manufacturer: Matec
- Model: 30 HV
Spindle speed up to 12,000 rpm, HSK 63 holder, NC swivel milling head +/- 90°, work table 3500 x 835 mm, integrated rotary table Ø 630 mm, IKz 70 bar, paper belt filter, chip conveyor, clamping hydraulics, NC rot...
Wiesbaden, Germany
2010 Matec 30 L
- Manufacturer: Matec
- Model: 30 L
Spindle speed up to 12.000 rpm, HSK 63 - A, electric handwheel, IKZ 20 bar, paper belt filter, Ww 80x, full cladding of working area, dir. Measuring systems, chip conveyor, bellows with steel lamellas, 3d probe, ...
Wiesbaden, Germany
2012 Matec 30 L
- Manufacturer: Matec
- Model: 30 L
Spindle speed up to 12.000 rpm, HSK 63 - A, electric handwheel, IKZ 20 bar, paper belt filter, Ww 80x, full cladding of working area, dir. Measuring systems, chip conveyor, bellows with steel lamellas, 3d probe, ...
Wiesbaden, Germany
1998 MATEC 35 L #1052-06044
- Manufacturer: Matec
- Power requirement: 60 kilowatt
= travelling column machine - with coolant through spindle - Accessories NC-dividing unit (= 4th axis) with tailstock, center height 225 mm; 2 hydr. vices make HILMA, model NC 160, width of jaws 160 mm; various t...
Bühl, Germany
Tip: Enter manufacturer, model or keyword
