Material handling » South Australia

Building Filters

24

Used Material Handling in South Australia, Australia

Klausen, Sower FDD25 Dispersers with hydraulic lifting columns, 3 mixers
- Manufacturer: Klausen, Sower
3 Mixer/Dispersers, One is an FDD25 Disperser and Lifting Column with a 37kW motor and 600 litre Stainless steel mixer vessel. The other 2, 15 and 4 kW all have hydraulic lift and can be used in a variety of in...
$10,622 USD
Get financing
Est. $209/mo
Adelaide, Australia
Trusted Seller
2005 Crown CG25E
- Model: CG 25
- Hours: 5,077 h
- Lifting capacity: 2,500 kg
Compliance date: CIRCA 2005 | Odometer (reading not visible): -- | Hour meter (showing on): 5,077 hr | Fuel: Petrol & LPG (Dual) | Registration: Last registered as S57SSC Current registration status TBA | Gst st...
Pennington, Australia
Trusted Seller
2010 Linde E16C
- Model: E16C
- Hours: 8,545 h
- Lifting capacity: 1,600 kg
Compliance date: CIRCA 2010 | Hour meter (showing on): 8,545 hr | Fuel: Electric | Registration: No Registration | Gst status: GST Included in Sale Price
Pennington, Australia
2020 Sany SCP350C2
- Manufacturer: Sany
- Lifting capacity: 35,000 kg
- Fuel type: diesel
inspection notes: By Appointment Only - Jarrad Hannaford 0456 456 375 Covered footwear MUST be worn or you will be refused entry. delivery notes: All items must be paid for and collected by 18/02/2026. By Appoint...
Bordertown, Australia
2019 Haulette 12DX
- Manufacturer: Haulette
- Fuel type: diesel
- Maximum lift height: 10 m
2019 Haulotte Compact 12DX Scissor Lift Max Lift Height: 10m damage: Scratches And Dents Evident, Some Rust Evident. inspection notes: Items Are Available For Inspection From 14/01/2026 between 8.30am and 3.30pm....
Mount Gambier, Australia
2020 Sany SRSC45HC
- Manufacturer: Sany
- Model: SRSC45
- Horsepower: 330 hp
- Lifting capacity: 45,000 kg
2020 Sany SRSC45HC 45t Reach Stacker 45 Tonne Lifting Capacity 15.1m Max Lifting Height 250kw Engine Power 72Tonne Gross Mass 06/08/2020 inspection notes: By Appointment Only - Jarrad Hannaford 0456 456 375 Cover...
Bordertown, Australia
Pallet of Aluminium Steps and Hand Rails
Pallet Of Aluminium Steps And Hand Rails 2 X 3 Steps With Handrails Rails 1200mm Wide aluminium Sold As Is And As A Bundle. inspection notes: By Appointment Only - Jarrad Hannaford 0456 456 375 Covered footwear ...
Mount Gambier, Australia
2012 2012 Kerfab Forklift Attachment
Kerfab Pallet Forklift Attachment 2012 Serial: 1228404 Sold As Is inspection notes: By Appointment Only - Jarrad Hannaford 0456 456 375 Covered footwear MUST be worn or you will be refused entry. delivery notes...
Port Augusta, Australia
1981 Hyster H250e
- Manufacturer: Hyster
- Model: H250E
- Lifting capacity: 11,340 kg
- Operating weight: 16,000 kg
Hyster Forklift. Chev 350 LPG Engine Monotrol transmission Hours 112X Smooth front tyres in good condition 15 degree back tilt 2.4 metre forks Load rated at 7.22 tonne @ 1220mm prior to side pick frame being remo...
$20,182 USD
Get financing
Est. $380/mo
Wingfield, Australia
2014 Linde H18
- Manufacturer: Linde
- Model: H18
- Lifting capacity: 1,800 kg
- Operating weight: 2,700 kg
Linde H18 LPG solid tyre Forklift Built 2014 Hours 9155 Lift height 3550 mm FWD Tilt 6 deg Rear Tilt 9 deg Load vert mast 1595kgs Load fwd tilt 1020 mm Mast 2 stage Forks 1100 mm Side shift Rops with canopy Solid...
$6,373 USD
Get financing
Est. $125/mo
Wingfield, Australia
Manitou MLT-X-840 137 PS
- Manufacturer: Manitou
- Model: MLT-X 840
- Lifting capacity: 4,000 kg
- Operating weight: 7,500 kg
Manitou MLT-X-840 137 PS Telescopic Handler 3923 Hours. NOTE- 3% Buyers Premium On ALL Lots. Don't Miss Out Inspection Recommended
Saddleworth, Australia
Noyes Winch KRN Class
55 class 11 HP, Frame 98, 51 rad/r.p.m, 60 min rating. 4000/440 VOLTS. 3 phase. 50 cycles. 20 amp, 280 volts. Class A Insulation, Genie Z-34/22. Quick Winch -50 foot per min Cap 125 foot hp 15 fwl 3500 lb class ...
$4,674 USD
Wingfield, Australia
WINCH Hydraulic
Hydraulic Winch, No motor. Item will be sold on an "as is, where is" basis Reasonable offers will be considered Location: Lot 12 Middle Beach Road Middle Beach, SA 5501 Opening Hours: Monday to Friday, 8:00 AM – ...
$1,062 USD
Wingfield, Australia
HOSOKAWA IRON WORKS Powder Feeder Hopper on stand for Air Classifier
- Manufacturer: Hosokawa
HOSOKAWA IRON WORKS Powder Feeder Hopper on stand for Air Classifier This unit was feeding the items below (that we also have for sale): British REMA MAC 2 Aerosplit Classifier Powder Micron Separator Air Classif...
$2,413 USD
Ottoway, Australia
LA Bounty Grapple suits 25 35 Ton Early Hitachi
- Manufacturer: Hitachi
LA Bounty Grapple in excellent condition! Previously used on Hitachi EX300 Thank you!
$5,594 USD
Get financing
Est. $110/mo
Wingfield, Australia

12

Overview

Material handling equipment encompasses tools and machinery used to move, store, control, and protect materials and products throughout manufacturing, warehousing, distribution, consumption, and disposal stages. This category includes forklifts, conveyors, pallet jacks, and automated storage systems, all designed to enhance efficiency and safety in material transport and storage.

FAQ

What factors should I consider when purchasing material handling equipment?

Consider the type of materials you handle, the weight and volume of these materials, the layout of your facility, and the specific tasks you need the equipment to perform. Also, evaluate the equipment's durability, ease of use, and maintenance requirements.

How can I ensure safe shipping of material handling equipment?

Choose a reliable shipping company experienced in transporting heavy machinery. Ensure the equipment is securely packed and protected to prevent damage during transit. It's also beneficial to purchase insurance for added protection.

What are the maintenance requirements for material handling equipment?

Regular maintenance includes inspecting and lubricating moving parts, checking hydraulic systems, replacing worn components, and ensuring all safety features are functioning correctly. Follow the manufacturer's guidelines for specific maintenance intervals and procedures.