Test, Lab, Medical equipment » Materials Testing » Belgium

Building Filters

399

Used Materials Testing in Belgium

  • no-image_en.png

    A081-01 : Lightweight aggregates crushing resistance

      Lightweight aggregates crushing resistance Standard : EN 13055-1 METHOD 1 Apparatus for the determination of the crushing resistance of lightweight aggregates having diameter from 4 to 22 mm, and a volumic mass o...

      Sint-Niklaas, Belgium
    • no-image_en.png

      B024 : Permeameter

        Permeameter Mainly used in situ to perform and to check the permeability and drainage on road carpets, concrete pavements, tamped earth etc. The test consists in filling the cylinder with water, after ermetically...

        Sint-Niklaas, Belgium
      • no-image_en.png

        Calibration Proctor Mould Small diam 100

        • Manufacturer: Proctor

        Calibration of a Proctor Mould: diameter and height The calibration/testing services offered in this quotation are performed by European Lab Services site Sint-Niklaas. European Lab Services is accredited accordi...

        Sint-Niklaas, Belgium
      • no-image_en.png

        Calibration Pull off Tester

          Calibration for a Pull off tester with one channel under ISO17025 accreditation 327-CAL The calibration/testing services offered in this quotation are performed by European Lab Services site Sint-Niklaas. Europea...

          Sint-Niklaas, Belgium
        • no-image_en.png

          Calibration Vibrating Table and Sieve Shaker

            Calibration Vibrating Table Control of Fraquency and Falling Height wiè certificate after payment

            Sint-Niklaas, Belgium
          • no-image_en.png

            Calibration Ring and Ball Softening Point

              Sint-Niklaas, Belgium
            • no-image_en.png

              Calibration Ductilometer one lc

                Calibration Ductilometer Apparatus with one load cell

                Sint-Niklaas, Belgium
              • no-image_en.png

                Calibration Cover Meter rebar

                  Calibration Rebound Hammer

                  Sint-Niklaas, Belgium
                • no-image_en.png

                  Calibration Autom Vicat Apparatus: weight and dimensions

                    Calibration Vicat Apparatus

                    Sint-Niklaas, Belgium
                  • no-image_en.png

                    Calibration Autom Penetrometer on Bitumen

                      Calibration Automatic Penetrometer on Bitumen

                      Sint-Niklaas, Belgium
                    • no-image_en.png

                      Lightweight penetrometer ZLR-10

                        Lightweight penetrometer ZLR-10 according to DIN EN ISO 22476-2:2005 (DPL) (before DIN 4094) and TP BF-StB Teil B 15.1(DPL-5) > includes: 1 x Pile driver (10 kg) 1 x Anvil 1 x Guide bar with handle 6 x Plumb with...

                        Sint-Niklaas, Belgium
                      • no-image_en.png

                        S050SP Lightweight dynamic penetrometer OCW (extension)

                          Lightweight dynamic penetrometer OCW (extension) - 1 replacement point 5cm² - 1 metal brush - 1 bottle of oil - 2x tools for mounting purpose - 2x transport cases for weights and extension rods

                          Sint-Niklaas, Belgium
                        • no-image_en.png

                          Digital Crack width gauge with data connection

                            digital gap meter with wireless data connection sensor range +/- 80 mm d = 0,003mm incl.met air temperature data logger wireless data connection or USB connection The Wireless Crack Movement Recorder provides con...

                            Sint-Niklaas, Belgium
                          • no-image_en.png

                            A083: Aggregate crushing value apparatus dia.75mm

                              Aggregate crushing value apparatus dia.75mm Standard: comparable to BS 812:110 Comprising 75 mm nominal diameter steel cylinder, plunger, base plate, tamping rod and measure 57 mm diameter x 90 mm deep. Used for ...

                              Sint-Niklaas, Belgium
                            • no-image_en.png

                              CA408 Crack width gauge for walls (5 pcs)

                                Crack width gauge for walls (5 pcs), range 50 mm readings per mm

                                Sint-Niklaas, Belgium
                              2122232425

                              Overview

                              Materials testing involves evaluating the properties and performance of materials under various conditions. This process helps ensure that materials used in construction, manufacturing, and other industries meet specific standards and can withstand intended applications. Common tests include tensile, compression, impact, and hardness testing.

                              FAQ

                              What should I consider when buying materials testing equipment?

                              Consider the types of tests you need to perform, the materials you will be testing, and the equipment's accuracy, reliability, and compliance with industry standards.

                              How do I ensure the materials testing equipment is shipped safely?

                              Use a shipping company experienced with precision equipment. Ensure the equipment is properly packaged, secured, and insured during transit.

                              What is the maintenance schedule for materials testing equipment?

                              Regular maintenance includes calibration, cleaning, and inspection of components. Follow the manufacturer’s guidelines for detailed maintenance intervals and procedures.