Test, Lab, Medical equipment » Materials Testing » Gauteng

Building Filters

270

Used Materials Testing in Gauteng, South Africa

  • Hoek Triaxial Cell (UTR-0455)

    Hoek Triaxial Cell (UTR-0455)

      Strength and Deformability Tests Product Codes: Description: Hoek Cells comprise a steel body complete with two quick release self-sealing couplings for oil inlet and outlet, two steel hollow end caps which are s...

      Alberton, South Africa
    • Compression and Flexural Frames (UTCM-3722)

      Compression and Flexural Frames (UTCM-3722)

      • Manufacturer: Labequip

      Compression and Flexural Machines Product Code: Description: The UTCM-3722 and UTCM-3742, very rigid two column frames have been designed for compression and/or flexure testing of mortar prisms and cubes specimen...

      Alberton, South Africa
    • Linear Shrinkage Mould (UTS-0235)

      Linear Shrinkage Mould (UTS-0235)

      • Manufacturer: Labequip

      Soil Classification The UTS-0235, Linear Shrinkage Mould is 140 mm long and 12.5mm radius and is used for the determination of the total linear shrinkage of soils, and indicates the plastic properties of soils wi...

      Alberton, South Africa
    • Mechanical Strain Gauge (UTC-3110)

      Mechanical Strain Gauge (UTC-3110)

      • Manufacturer: Labequip

      Protection and Repair of Concrete Structures (NDT) Hardened Concrete Testing Product Codes: UTC-3110 Mechanical Strain Gauge 100 mm Measuring Base UTC-3130 Mechanical Strain Gauge 300 mm Mea...

      Alberton, South Africa
    • Torsion of bars (SE110.29)

      Torsion of bars (SE110.29)

      • Manufacturer: Labequip

      elastic torsion of a bar under a torque Description: Torsion occurs primarily on axles and drive shafts in motor vehicles and machines. The torsion occurring in the shaft cause cross-sections of the shaft to be p...

      Alberton, South Africa
    • Investigation of simple stability problems

      Investigation of simple stability problems (SE 110.19)

      • Manufacturer: Labequip

      representation of simple stability problems on a buckling bar Description: Buckling is a stability problem which occurs in practice when slim components are subjected to compressive loading. Following a “disturba...

      Alberton, South Africa
    • Deformation of curved-axis beams (FL

      Deformation of curved-axis beams (FL 170)

      • Manufacturer: Labequip

      elastic deformation of curved-axis beams Description: In construction engineering, a distinction is made between beams and arches. An arch is a statically indeterminate supported structure with a curved axis and ...

      Alberton, South Africa
    • Buckling of bars (SE 110.57)

      Buckling of bars (SE 110.57)

      • Manufacturer: Labequip

      demonstration of buckling in bars Description: Long and slim components such as bars, beams and columns are often subjected to compressive forces along their long axis owing to their function. Under the influence...

      Alberton, South Africa
    • FULLY-AUTOMATED RESILIENT MODULUS UNIT (LoadTrac

      FULLY-AUTOMATED RESILIENT MODULUS UNIT (LoadTrac II-RM)

      • Manufacturer: Geocomp

      Advanced Soil Systems Geocomp’s LoadTrac II Resilient Modulus unit fully automates resilient modulus tests on base/subbase/subgrade materials. The LoadTrac II meets or exceeds all specifications for Resilient Mod...

      Alberton, South Africa
    • Melting Pot (UTC-1070)

      Melting Pot (UTC-1070)

      • Manufacturer: Labequip

      Hardened Concrete Testing Product Codes: Description: The Melting Pot is designed for melting capping compound, sulphur, wax and similar materials. The melted paraffin wax is used to seal soil samples and other m...

      Alberton, South Africa
    • TRL DCP – DYNAMIC CONE

      TRL DCP – DYNAMIC CONE PENETROMETER (LES-DCP)

        The TRL Dynamic Cone Penetrometer (DCP) Supplied by Laboratory Equipment Supplies is an instrument designed for the rapid in-situ measurement of the structural properties of existing road pavements constructed of...

        Alberton, South Africa
      • Displacement Transducers & Dial Gauges

        Displacement Transducers & Dial Gauges (UTGM-0060)

        • Manufacturer: Labequip

        Measuring Instruments Product Codes: Description: Linear Potentiometric Displacement Transducer (LPDT) provides an electric signal proportional to the linear shaft displacement. UTEST supplies high quality Linear...

        Alberton, South Africa
      • Vebe Consistometer (UTC-0560E)

        Vebe Consistometer (UTC-0560E)

          Fresh Concrete Testing Product Codes: Description: UTC-0560E model consistometer conforms to EN 12350-3 for determining the consistency of fresh concrete by means of the Vebe time. The unit consists of a vibratin...

          Alberton, South Africa
        • FULLY-AUTOMATED SHEARTRAC III SYSTEM (ShearTrac

          FULLY-AUTOMATED SHEARTRAC III SYSTEM (ShearTrac III)

          • Manufacturer: Labequip

          Advanced Soil Systems ASTM D-5321 and D-6243 ASTM 3080/T236 BS 1377 The ShearTrac IIITM system is capable of performing the consolidation and shear- ing phases of a 305 mm x 305 mm (12 x 12 in. by 200mm(8.0 in) h...

          Alberton, South Africa
        • RSI-ShearTrac-II (RSI-ShearTrac-II)

          RSI-ShearTrac-II (RSI-ShearTrac-II)

            Classification Tests Product Code: RSI-ShearTrac-II / 13 kN (3,000 lbs.) frame capacity Description: The Rock Shear Interface (RSI) is a versatile system capable of performing the consolidation and shearing phase...

            Alberton, South Africa
          1112131415

          Overview

          Materials testing involves evaluating the properties and performance of materials under various conditions. This process helps ensure that materials used in construction, manufacturing, and other industries meet specific standards and can withstand intended applications. Common tests include tensile, compression, impact, and hardness testing.

          FAQ

          What should I consider when buying materials testing equipment?

          Consider the types of tests you need to perform, the materials you will be testing, and the equipment's accuracy, reliability, and compliance with industry standards.

          How do I ensure the materials testing equipment is shipped safely?

          Use a shipping company experienced with precision equipment. Ensure the equipment is properly packaged, secured, and insured during transit.

          What is the maintenance schedule for materials testing equipment?

          Regular maintenance includes calibration, cleaning, and inspection of components. Follow the manufacturer’s guidelines for detailed maintenance intervals and procedures.