Used dimension in Taiwan

Motorized Test Stand

QC-528 Motorized test stand is designed to be available to mount with different brand/type of force gauge, test stand is provided with displacement display, test speed with digital setting, it is the best choice ...

Circular Sample Cutter Confirm to ISO3801, ASTM D3776, GB/T4669, BS2471 Standard

• Manufacturer: cometech testing machines

QC-PS can cut specimens of area 100cm², weighing specimen unit weight, the balance of the required minimum reading value should reach 0.01 g. The cutter can cut specimens that thickness are 5 mm. Cutting material...

Water Absorption Tester Confirm to TAPPI T441, JIS-P8140 Standard

• Manufacturer: cometech testing machines

Moisture absorbency is the important characteristic of paper and it tests on various (treated or untreated) of paper and cardboard material which absorption of water, oil …of liquid. The specimen is fixed on QC-1...

Elmendorf Tearing Strength Tester Confirm to TAPPI-T414, JIS P-8116 Standard

QC-337 can be classified by different test strength; it can test the tear strength of paper, fiber and PVC material. Grip the specimen and use cutter to make a notch. Falling pendulum will use its swing force to ...

Portable Hydrostatic Head Tester

• Manufacturer: cometech testing machines

QC-317M(N) Portable design and without electricity that can proceed with test. No time and space limitations, mainly used on the spot measurement, inspect textile water-resistance ability. The test method is divi...

Spray Tester Confirm to JIS- L1092 , BS EN 24920 , AATCC-22 , ISO 4920, ASTM D1913-2000, ASTM D583-54 Standard

• Manufacturer: cometech testing machines

QC-305 may test water-proof or non-water-proof textile surface water resistance. Clamping textile with 45 degree angle on grip, hold open around 150mm diameter plane, putting sprayer above sample center 150mm, sp...

Manual Molding Machine

• Manufacturer: cometech testing machines

QC-601B has parallel pressure plates and according to area of the material and force demand to choose machine type. Commonly used in powder compact, parts assembly, lamination work. Put the ingredients in the mid...

Demattia Flex Crack Tester Confirm to ASTM-D813, JIS-K6301 Standard

• Manufacturer: cometech testing machines

QC-625 Rubber, leather, synthetic leather, sole of shoes, after a constant flexing bending motion, observe the cracking lever to judge and compare the endurance of material. Industry: Rubber, Leather, shoes sole

Drop Tester

• Manufacturer: King Design Industrial

KD-2768 Drop Tester Description Drop tester is applied to test the anti-vibration, covering-protection capability of packaging material, or product’s impact-resisting capability to determine the improvement parts...

Stand Holder Confirm to ASTM D2240 ISO 868 DIN 53505 JIS K7215-1992 JIS S6050 Standard

Hardness tester is suitable for soft material such as nonmetal. Applying the specified force on the standard material plate, and the hardness of the material can be obtained by reading the values on the pointer. ...

Manual Crock Meter Confirm to JIS-L0849, ISO-105, AATCC-8 ,JIS-L0862 Standard

• Manufacturer: cometech testing machines

This tester’s abrasion head can clamp dry or wet white cloth, under 900g loads, revolving handle by hand to proceed with specimen abrasion test (Common standard is 10 test times), test speed is around 60 CPM. Aft...

Compression & Deformation Tester Confirm to ASTM-D395, JIS K6262, GB/T 7759, ISO 815 Standard

• Manufacturer: cometech testing machines

It is use static state way to testing rubber under constant compression and exerting heat condition to check the permanently deformation rate of the material. This test needs to collocate with oven and Thickness ...

Portable Pencil Hardness Tester Confirm to ASTM D3363, ECCA T4, MILC27 227, NEW5350, SIS184187, SNV37113, JIS-C3003/D0202 Standard

GI-M010 according to WolffWilborn standard, this tester is designed to measure the coating surface hardness scrape-resistance, applied to experiment analysis or control production quality, suitable products inclu...

Manual Twist Counter for Steel Wire

• Manufacturer: cometech testing machines

QC-310A main function is to test steel wire twist, applied in general twisted wire or hard wire twisted test, with obverse and inverse S and Z twisted direction Industry: Metal (Steel wire)

Perspiration Tester Confirm to AATCC-15, ISO 105, JIS 0848, GB T5713 Standard

• Manufacturer: cometech testing machines

QC-315 is used to determine the fastness of colored textiles soaked in water condition. Using textile and one piece (multi-fiber fabric) or two pieces (single fabric) stitched, after soaking in solution, be clamp...