Used wp

2016 Gunt WP 300 Tensile tester

• Manufacturer: Gunt

A Nice tester for production quality testing and very useful for education - - tensile tests. Adaptors included (M10 ) - plot stress–strain diagrams - compression tests - Brinell hardness test Adaptors included...

Fatigue strength test (WP 140)

different specimens show the influence of notching and surface quality Description: Moving components and machine parts are often exposed to periodically fluctuating loads. Even if the dynamic load is far below t...

Buckling behaviour of bars (WP 120)

• Manufacturer: Labequip

investigation of all relevant buckling problems Description: In engineering mechanics, loss of stability is known as buckling. The bar axis laterally deflects under the effect of compressive forces and with incre...

Verification of stress hypotheses (WP 130)

verification of the Rankine yield criterion and the Tresca yield criterion Description: Stress hypotheses are applied in the science of the strength of materials when calculating comparative stresses where unequa...

Demonstration of Euler buckling (WP 121)

• Manufacturer: Labequip

demonstration of all buckling cases of Euler buckling Description: In stability theory, the four cases of Euler buckling represent the elastic flexural buckling of straight bars. Above a specific load – the buckl...

Creep rupture test (WP 600)

typical phenomena of creep processes Description: Components that are subjected to long-term constant loads deform plastically. This material behaviour is called creep. The creep rupture test is a destructive tes...

Impact test, 300Nm (WP 410)

Charpy notched-bar impact test with increased work capacity up to 300Nm Description: In the field of industrial quality control, the impact test is a widely used test method with which to quickly and easily deter...

Impact test, 25Nm (WP 400)

Charpy notched-bar impact test Description: In the field of industrial quality control, the impact test is a widely used test method with which to quickly and easily determine characteristics for a material or co...

Materials testing, 20kN (WP 300)

compact, simple experimental unit for basic destructive tests Description: A solid understanding of the properties of materials is essential for technical and scientific professions. This knowledge helps select t...

Materials testing, 50kN (WP 310)

hydraulically operated trainer, based on industrial standards Description: A classic discipline of materials testing is the destructive testing method, in which specimens are mechanically tested to failure. The m...

Torsion test, 30Nm (WP 500)

generate the twisting moment by means of a worm gear Description: The torsion test is a destructive testing method that studies the plastic behaviour of materials. In practice, components that are twisted in thei...

Torsion test 200Nm, motor drive (WP 510)

measure the test moment by means of strain gauge Description: The torsion test is a destructive testing method that studies the plastic behaviour of materials. In practice, components that are twisted in their ap...

Beam on two supports: shear force diagram (WP961)

• Manufacturer: Labequip

application of the method of sections to determine the shear force Description: WP 961consists of a beam mounted on two supports which is subjected to point loads. The beam is cut at one point. At that point ther...