- Trusted Seller
2002 MEP, SEMI-AUTOMATIC COLD CUT SAW MODEL TIGER 350 SX
- Model: Tiger 350
EQUIPPED WITH: COOLANT PUMP & TANK MATERIAL LENGTH GAUGE, 600mm VERTICAL CLAMP AIR/OIL DOWN FEED SYSTEM VERTICAL SLIDE TYPE CONDITION: Pre-Owned If you can't find the exact pre-owned machine you're looking for in...
Ontario, Canada - Trusted Seller
MEP Tiger 370 CNC – LR (2009) | Industrial Band Saw – Only 500 Hours, Perfectly Working!
- Manufacturer: MEP
- Model: Tiger 370
Are you looking for a high-precision industrial band saw with few hours of use? The MEP Tiger 370 CNC - LR, manufactured in 2009, is a fully automatic and CNC-controlled cutting machine, ideal for the metalworkin...
Italy - Trusted Seller
2025 MEP SHARK 281 SXI EVO
- Manufacturer: MEP
- Model: Shark 281
Round: 120 mm | Square: 110 mm | Flat: 110 x 110 mm | From: 36 m/min | Up to: 72 m/min | Band length: 2950 mm | Band width: 27 mm | Sheet thickness: 0.9 mm | Vice opening: 285 mm | Voltage 50 hz 3x: 400 Volt | S...
Brügg, Switzerland - Trusted SellerAuction
Bandsaw MEP SHARK 330 CNC FE
- Manufacturer: MEP
- Model: Shark 330
MEP 330 Cnc Band Saw .CNC Technology: – Computer numerical control (CNC) that allows complete automation of the cutting process. – Intuitive programming that facilitates the configuration and adjustment of cuttin...
GermanyVisit Auction Website - Trusted Seller
MEP Shark 281 CCS
- Manufacturer: MEP
- Model: Shark 281
Domestic equipments: - with semi-automatic lowering - The CUT CONTROL SYSTEM allows semi-automatic lowering of the Saw bow by the weight of the saw head - The lowering speed is infinitely regulated. Single cuts c...
Günzburg, Germany - Trusted Seller
MEP Shark 282 CCS
- Manufacturer: MEP
- Model: Shark 282
- with semi-automatic lowering - The CUT CONTROL SYSTEM allows semi-automatic lowering of the Saw bow by the weight of the saw head - The lowering speed is infinitely regulated. Single cuts can do so be carried o...
Günzburg, Germany - Trusted Seller
MEP Shark 332-1 SXI EVO
- Manufacturer: MEP
- Model: Shark 332
Semi-automatic function: - Vice closes and engine starts - Saw head lowers for the cut - Engine shuts off - Saw head lifts, vice opens Semi-automatic dynamic system: Manual lowering of the saw blade to the desire...
Günzburg, Germany - Trusted Seller
MEP Shark 282 SXI EVO
- Manufacturer: MEP
- Model: Shark 282
Semi-automatic function: - Vice closes and engine starts - Saw head lowers for the cut - Engine shuts off - Saw head lifts, vice opens Semi-automatic dynamic system: Manual lowering of the saw blade to the desire...
Günzburg, Germany - Trusted SellerAuction
MEP SHARK 270 Band Saw - horizontal
- Manufacturer: MEP
- Model: Shark 270
Band sawing machine with: - Cut control system - Double mitre 45° right and left - Mitre adjustable via turntable - Coolant device Cutting diameter 210 mm Cutting area at 90 degrees: flat 270 x 200 mm Cutting ran...
Velen, GermanyVisit Auction Website - Trusted Seller
MEP SHARK 332-1 NC 5.0
- Manufacturer: MEP
- Model: Shark 332
- Power requirement: 2.2 kW
Fully automatic electro-hydraulic band saw with multi-micro processors and additionally semi-automatic, semi-automatic-dynamic and manual function. - Automatic cycle (cuts from 0 ° to 60 ° link). CNC machine with...
Günzburg, Germany 
2002 MEP SHARK 270
- Manufacturer: MEP
- Model: Shark 270
- Power requirement: 1.5 kW
Bandsaw machine with: - Miter 45 ° right - Miter on turntable adjustable - Coolant system
Velen, Germany
2015 MEP Shark 261-1 HB
- Manufacturer: MEP
- Model: Shark
Features: - Manual band saw - Single-sided miter cut - Automatic lowering of the saw frame - Cuts from 0° to 60° left - Coolant system
Niederlangen, Germany
2020 MEP Shark 282 CCS
- Manufacturer: MEP
- Model: Shark 282
Mep Shark 282 CCS Demo Model. Mep Shark 282 CCS manually operated band saw machine equipped with a saw control system. The saw control system allows the machine to be used for both manual and semi-automatic sawin...
Rhenen, Netherlands
MEP SHARK 350 NC HS 5.0
- Manufacturer: MEP
- Model: Shark 350
- Power requirement: 4 kW
Shark 350 NC HS 5.0, automatic hydraulic band saw machine in two Column construction for 0° cuts on solid material and steel profiles, Stainless steel and steel alloys up to a maximum of 350x350 mm. The standard ...
Germany
MEP Shark 332 RC Konnect band saw
- Manufacturer: MEP
- Model: Shark 332
The rotary band saw machine with double programmable miter system that maximizes safety and strength for reliable performance and an always efficient smart production. Shark 332 RC Konnect, automatic hydraulic ro...
Drammen, Norway
Tip: Enter manufacturer, model or keyword