- Trusted Seller
Sandlabo sand compactability tester GF/PVG
used
- Manufacturer: GF
Dimensions: Width: 215mm, Depth: 610mm, Height: 530mm with somples sleeve Ø 50mm H120 mm
Amel, Belgium - Trusted Seller
Belt convoyor with sand arerator 3,56m×0,5m
used
External dimensions: Lenght: 3800mm; Width: 1050mm; Height: 560mm Used dimensions: Lenght 3560mm; Width: 500mm Motor: 1,1KW, 220/380V, 125r/min Chain drive, motor sand acrator 0,5 PS; 380V; 71,4 r/min
Amel, Belgium - Trusted Seller
Hardening furnace for Labo 260×140×600 mm 1150°C
used
- Manufacturer: Mahler
Dimension: Width: 750mm, Depth: 930mm , Heignt: 1440mm Usable dimensions: width: 260mm; depht: 600mm; Hight: 140mm Revolving door with thermostat and control box
Amel, Belgium - Trusted Seller
Band sander REMA vertical and horizontal
used
- Manufacturer: Merz
Motor: 1,8-2,2 kW, 380 V, n° 091670; 1450/2900 rpm, type FDR90L IP44 T-notch table with 2 speeds with dust collector in the base
Amel, Belgium - Trusted Seller
Thickness gauge ELCOMETER
used
With box (microns) Weight: ± 3 kg | Dimensions: length 160 mm, largeur 85 mm, height 40 mm | Motor: 3 V, 2 batteries 1AA | Measuring gauge: 1 to 1250 µm
Amel, Belgium - Trusted Seller
Pneumatic central board for OSBORN 716
used
- Manufacturer: ARCO JOUCOMATIC
Control board for the pneumatics of moulding machine OSBORN 716 With pneumatic plan
Amel, Belgium - Trusted Seller
1992 Vibrating conveyor 1600mm x 590mm
used
- Manufacturer: ZIPPE
External dimensions: length 1650mm, width 960mm, height ± 800mm Motor: 2x 0,81 kW, 230/400 V, brand AEG, type vibrating motor, 1410 rpm, serial number 96005867 On 4 rubber springs
Amel, Belgium - Trusted Seller
Vibrating conveyor KÜTTNER 4000mm x 800mm
used
- Manufacturer: Küttner
External dimensions: length 4150mm, width 1940mm, height 1500mm Motor: 2x 1,7 kW, 230/400 V, brand CYRUS, type vibrating motor, 980 rpm With base construction and releability ripcord
Amel, Belgium - Trusted Seller
1991 Manual sandblasting unit 900mm x 1200mm x 500mm
used
- Manufacturer: MHG
With tunring table, Ø 700mm With cyclone as preseparator With one door on every side Very good professionnal machine
Amel, Belgium - Trusted Seller
Screw mixer AXMANN 5 t/h
used
- Manufacturer: Axmann
External dimensions: length 2570mm, width 1000mm, height 2150mm Maximum output 5 t/h With 2 gear pumps drived by direct current motors controlled by potentiometer With Relais control board in the machine base Wit...
Amel, Belgium - Trusted Seller
2013 Pneumatic sand feeder KLEIN 75 l CE
used
Max. pressure 7 bar With pneumatic cone fastener Inlet Ø 100mm Outlet Ø 70mm With CE n° 0045
Amel, Belgium - Trusted Seller
1990 Dust collector for silos AM 134, filter surface 13 m²
used
- Manufacturer: INFASTAUB
Filter surface ± 13m² With motorized exenter vibrations With cover on request (against extra charge)
Amel, Belgium - Trusted Seller
1998 Gassing unit coldbox LÜBER LW-FDA-825i
used
- Manufacturer: Lüber
- Model: LW-FDA 825
Gas pressure is regulated by proportional valve Gas dosing is made by high speed counting All parameters are introduced in the machine panel -gassing pressure -main gassing pressure -pressure ramp -gassing time -...
Amel, Belgium - Trusted Seller
horizontal centrifugal casting machine VEB
used
Motor VEM DDR, type ring CLU 296/4-FW15Z, 3,33 /10 kW, 220/380 V, 650/1950 rpm Each with a different shell diameter Available: 8 x Ø 230-231 mm, length 400 mm 1 x Ø 160-161 mm, length 440 mm With mechanical brake...
Amel, Belgium - Trusted Seller
1986 Core sand mixing line KLEIN, ± 2 t/h
used
Vibratory mixer Sand distributor system Panel Without mixing vessel
Amel, Belgium
Tip: Enter manufacturer, model or keyword
