- Trusted Seller
Polishing machine Meuser
- Manufacturer: Meuser
3-jaw chuck Ø190 mm int./ext. jaws magnifier lamp Rebuilt lathe that have been used as polishing machine. This information is prepared to the best of our ability - but is not binding in detail. All prices are exc...
Gnosjö, Sweden - Trusted Seller
Meuser 300 x 2000 mm
- Manufacturer: Meuser
- Spindle bore: 40 mm
Meuser 300 x 2000 mm Distance between centers: 2000 mm | Swing over bed: 300 mm | Diametre of main spindle bore: 40 mm | Length: 3400 mm | Width: 900 mm | Height: 1320 mm | Weight: 2,2 ton
Deinze, Belgium - Trusted Seller
Lathe 720 x 3800 mm from Meuser – M-IV-S 35696
- Manufacturer: Meuser
- Model: M-IV-S
- Spindle bore: 95 mm
Heavy lathe, lathe, lathe, lead screw lathe, lead screw lathe
Wiefelstede, Germany - Trusted Seller
Meuser 400 x 1.000
- Manufacturer: Meuser
Distance between the centers: 1.000 mm | Center height: 200 mm | Turning diameter above the bed: 400 mm ø | Turning diameter above the support: 220 mm ø | Rotational diameter in the bag: 600 mm ø | Through: 41 m...
Etten-Leur, Netherlands - Trusted Seller
Meuser Ø 1480 x 7000 mm
- Manufacturer: Meuser
- Spindle bore: 102 mm
3 claw chuck 4 claw chuck dia 1100 mm 1 steady Distance between centers: 7000 mm | Swing over bed: 1480 mm | Swing over cross-slide: 1150 mm | Swing in gap: 1800 mm | Diametre of main spindle bore: 102 mm | Power...
Deinze, Belgium - Trusted Seller
1956 Lathe 550 x1400 mm from Meuser - M3A 29139
- Manufacturer: Meuser
- Spindle bore: 58 mm
Heavy lathe, lathe, lathe, lead screw lathe, lead screw lathe
Wiefelstede, Germany - Trusted Seller
Meuser 520 x 2.100
- Manufacturer: Meuser
Distance between the centers: 2.100 mm | Center height: 260 mm | Turning diameter above the bed: 520 mm ø | Turning diameter above the support: 320 mm ø | Rotational diameter in the bag: 720 mm ø | Through: 62 m...
Etten-Leur, Netherlands - Trusted Seller
MEUSER M110BF
- Manufacturer: Meuser
Boring Machine. Description: 1500 x 1500mm rotary table. Travels (Long. x Transverse x Height): 3000 x 2200 x 2000mm. Shank of 900mm and 125mm in diameter. HEIDENHAIN Visualizer
Spain - Trusted Seller
Meuser MV Ø 950 x 5000 mm
- Manufacturer: Meuser
- Spindle bore: 80 mm
3 claw chuck 4 claw chuck Distance between centers: 5000 mm | Swing over bed: 950 mm | Swing over cross-slide: 460 mm | Diametre of main spindle bore: 80 mm | Number of speeds: 9 > 450 rpm | Chuck (3/4 pinch) -- ...
Deinze, Belgium - Trusted SellerAuction
MEUSER M 3 A Lead and Pull Spindle Lathe
- Manufacturer: Meuser
Guide and tension spindle lathe machine - Forkardt-3 jaw chuck F 315 - Single steel holder - Bezel - Moving center punch - Lining protection, limit switch monitored - Chip tray Turning diameter over bed 600 mm Tu...
Velen, GermanyVisit Auction Website - Trusted Seller
MEUSER M 0 L
- Manufacturer: Meuser
- Model: M 0 L
- Spindle bore: 47 mm
Additional Features Well-maintained center lathe Accessories Electrical equipment, digital measuring device for longitudinal movement, electric brake, four-jaw chuck, MULTIFIX quick-change tool post, coolant syst...
Wiesbaden, Germany - Trusted Seller
PARALLEL LATHE
- Manufacturer: Meuser
Features Accessories: - Cone copying machine - 2 steady rests - Mechanical clutch - Double prism and can handle all thread pitches without changing sprockets. Origin Germany Condition Used The parallel lathe is a...
Lima, Peru - Trusted SellerAuction
MEUSER M-III-S Lead and Pull Spindle Lathe
- Manufacturer: Meuser
Spindle speed: from 16 to 800 rpm Turning length: approx. 3000mm Center height above bed: 380 mm Turning diameter over bed: 760 mm Center height over support: 250 mm Turning diameter over support: 500 mm Spindle ...
Euskirchen, GermanyVisit Auction Website - Trusted Seller
PARALLEL LATHE
- Manufacturer: Meuser
Features Parallel Lathe Origin Germany Condition Used A parallel lathe is a machine tool widely used in the metalworking industry. It is also known as a conventional lathe or bed lathe. It consists of the following:
Lima, Peru - Trusted SellerAuction
Lead and feed screw turning machine MEUSER no nameplate detectable
- Manufacturer: Meuser
1 tool cabinet OLTROGGE 2-door with various turning chisels and tools for the lathe, 1 rolling cart with drill bits and holders, 1 wood work safety mat
Porta Westfalica, GermanyVisit Auction Website
Tip: Enter manufacturer, model or keyword
