Used Electrical Test Instruments in Dublin, Ireland

SyntheSys Research BSA17500CSI
- used
- Manufacturer: SyntheSys Research
Details SyntheSys Research BSA17500CSi The SyntheSys Research BERTScope 17500CSi advanced the BERTScope Family to 17.5 Gb/s and covers today’s serial data interfaces from 1Gb Ethernet (GbE) to 10 GbE and are desi...
Dublin, Ireland
Haefely IP4A
- used
- Manufacturer: Haefely
Details The Haefely IP4A Capacitive Coupling Clamp is a capacitive coupling clamp for superposition of bursts on data lines in accordance with IEC/EN 61000-4-4. Features include: maximum cable size 40mm minimum t...
Dublin, Ireland
Noiseken FNS-AXII-B50
- used
- Manufacturer: NoiseKen
Details The Noiseken FNS-AXII-B50 3 Phase Fast Transient / Burst Immunity Test Generator offers precise testing with up to 4,500V output adjustable in 10V steps, meeting IEC 1000-4-4 standards. It supports Contin...
Dublin, Ireland
Rohde & Schwarz ESU26
- used
- Manufacturer: Rohde & Schwarz
- Model: ESU26
Details The Rohde & Schwarz ESU26 is a high-performance EMI test receiver and spectrum analyzer covering 20Hz to 26.5GHz. It is CISPR 16-compliant and meets all commercial and military standards for electromagnet...
Dublin, Ireland
Rohde & Schwarz ESPC
- used
- Manufacturer: Rohde & Schwarz
- Model: ESPC
Details The Rohde & Schwarz ESPC EMI Precertification Test Receiver offers a wide frequency range from 150 kHz to 1000 MHz, supporting all major EMI standards including CISPR, EN, FCC, and VDE. It features parall...
Dublin, Ireland
Rohde & Schwarz ESVS30
- used
- Manufacturer: Rohde & Schwarz
- Model: ESVS
Details The Rohde & Schwarz ESVS30 EMI Test Receiver operates from 20 MHz to 1 GHz and offers full compliance with CISPR16-1 and VDE0876 standards. It features integrated preselectors, selectable 10 dB preamplifi...
Dublin, Ireland
Rohde & Schwarz ESIB7
- used
- Manufacturer: Rohde & Schwarz
- Model: ESIB7
Details The Rohde & Schwarz ESIB7 EMI Test Receiver features a frequency range from 20 Hz to 7 GHz, with exceptional sensitivity (NF typ. 10 dB), low noise (<–3 dBµV), and broad dynamic range. It supports fast sc...
Dublin, Ireland
Haefely MAG100
- used
- Manufacturer: Haefely
Details HAEFELY MAG100 The Haefely MAG 100 has a 1m x 1m square, single turn antenna. A cur of 120A is needed to feed the coil to produce a field of 100A/m. The MAG100 includes a cur transformer capable of delive...
Dublin, Ireland
Rohde & Schwarz ESW
- used
- Manufacturer: Rohde & Schwarz
- Model: ESW
Details The Rohde & Schwarz ESW provides exceptional signal analysis with frequency coverage from 1 Hz to 44 GHz, supporting compliance with CISPR 16-1-1, ANSI C63.2, MIL‑STD‑461, and FCC standards. It delivers h...
Dublin, Ireland
Keysight Technologies 11956A
- used
- Manufacturer: Agilent - Keysight
Details The Keysight (Agilent) 11956A is a high-power antenna capable of handling a maximum continuous power of 1000 Watts. It maintains a VSWR of less than 2:1 and operates with a 50-ohm impedance. This model in...
Dublin, Ireland
Keysight Technologies 84105EM
- used
- Manufacturer: Agilent - Keysight
Details The Keysight (Agilent) 84105EM EMC Design Development System integrates the E7401A EMC analyzer and the 11945A close field probe set, offering a comprehensive setup for electromagnetic compatibility testi...
Dublin, Ireland
Keysight Technologies 11960A
- used
- Manufacturer: Agilent - Keysight
Details The Keysight (Agilent) 11960A is a microwave mixer for frequency conversion applications in RF and microwave systems. Operating from 2 GHz to 18 GHz, it supports IF outputs between 10 MHz and 500 MHz with...
Dublin, Ireland
Haefely AXOS5
- used
- Manufacturer: Haefely
Details The Haefely AXOS 5 Compact Immunity Test System incorporates the best features from the stand alone test systems into a single unit providing speedy and thorough automated testing to the most common stand...
Dublin, Ireland
Rohde & Schwarz ESW26
- used
- Manufacturer: Rohde & Schwarz
- Model: ESW
Details ROHDE & SCHWARZ ESW26 The Rohde & Schwarz ESW26 is an EMI Test Receiver with outstanding RF characteristics, including high dynamic range und measurement accuracy. It meets the most stringent requirements...
Dublin, Ireland
Chase LFR1000
- used
Details The Chase LFR1000 delivers accurate low-frequency spectrum analysis from 9 kHz to 150 kHz, with a noise-floor sensitivity of –120 dBm and a dynamic range exceeding 100 dB. It features a 1 Hz resolution ba...
Dublin, Ireland