- Trusted Seller
2011 MILLTRONICS VM22
- Manufacturer: Milltronics
- Model: VM22
Equipped with: 15000 RPM Spindle Remote Handjog Sidemount ATC Toolholders and Workholding not included in sale. | X: 40.0 in | Y: 22.0 in | Z: 26.0 in | Power: 24.0 hp | Rpm: 15000.0 rpm | # atc: 24.0 | Taper:...
Santa Ana, CA 2008 Milltronics ML 40
- Manufacturer: Milltronics
- Model: ML40
CNC Lathe Used Milltronics ML 40 (2008) CNC Lathe for Sale. This pre-owned Milltronics CNC lathe is located in The United States and available to be seen under power for an inspection. If you have any questions...
USA
2005 MILLTRONICS VM-22
- Manufacturer: Milltronics
- Model: VM22
Milltronics VM-22 Vertical Machining Center with Chip Auger, Funnel and Coolant Tank Milltronics VM-22 Vertical Machining Center 2005 ( ) Short Terms and Conditions of Sale (Please contact us for complete Terms a...
2011 MILLTRONICS VM-22
- Manufacturer: Milltronics
- Model: VM22
Milltronics VM-22 Vertical Machining Center 2011 with 15000 RPM Spindle Remote Hand Jog, Side-mount ATC, Chip Auger, and Coolant Tank Short Terms and Conditions of Sale (Please contact us for complete Terms and C...
- Trusted Seller
2016 MILLTRONICS ML 22/60
- Manufacturer: Milltronics
- Model: ML22/60
- Spindle bore: 81.79 mm
2016 Milltronics ML 22/60 Flat Bed CNC Lathe 22" x 60" #6694 #2 SPECIFICATIONS: Number of tools 8 TRT Machine Height 83" Floor Space Required (W x D) 143" x83" Machine Weight 10,000 lbs. Power required 30 KVA / 8...
Pomona, CA 
108"X, 30"Y, 24"Z, 1999 MILLTRONICS VMD30 SERIES C VERTICAL MACHINING CENTER
- Manufacturer: Milltronics
- Model: VMD30
X-108", Y-30", Z-24" 20-POSITION AUTO TOOL CHANGER COOLANT SYSTEM WITH COMPUTER AND CABINET Turner's Machinery al@tunersmachinery.com Phone (805) 525-2171
109"X, 30"Y, 24"Z, 1996 MILLTRONICS VMD30 SERIES B VERTICAL MACHINIG CENTER
- Manufacturer: Milltronics
- Model: VMD30
CENTURION CONTROL Turner's Machinery al@tunersmachinery.com Phone (805) 525-2171
- Trusted Seller
1992 CENTER FOR CNC MILLING MILLTRONICS PARTNER 1 SERIES G SERIES 2646 - AXES 2516
- Manufacturer: Milltronics
- Model: Partner 1
Table Size: 40" X 12" Spindle Taper: #40 Tool Changer: 12 ATC Centurion V CNC Control
Hermosillo, Mexico - Trusted Seller
2005 CNC MILLING MACHINE MILLTRONICS CGI VM16 SERIES G SERIAL 6611. DISASSEMBLED. REQUEST 18 23 1653 8023464
- Manufacturer: Milltronics
- Model: VM16
- Spindle taper: BT 40
Only two axes x, z It has a built-in microscope for parts inspection Cat4 cones 0 but it is not ATC, it is fixed clamping, X 30" Z, 20" 5 manuals One CPU, one crystal for the microscope 4000 rpm
Hermosillo, Mexico - Trusted Seller
Milltronics MB19 CNC Vertical Machining Center
- Manufacturer: Milltronics
- Model: MB19
- Spindle taper: CAT 40
Milltronics MB19 CNC Vertical Machining Center Rapid Rate X Axis: Rapid Rate Y Axis: Rapid Rate Z Axis: 7hp peak/5 hp continuous spindle motor using CT40 tooling. Spindle speeds on low range from 60-600 rpm and h...
Elk Grove Village, IL 2000 Milltronics ML 15
- Manufacturer: Milltronics
- Model: ML15
- Spindle bore: 55.37 mm
CNC Tool Room Lathe -EQUIPPED WITH- Smart Dex 8-Position Turret
Town of Rockingham, VT
2011 MILLTRONICS VM20
- Manufacturer: Milltronics
- Model: VM20
Table size- 34” x 20” Maximum table load- 2000 Lbs. X axis travel- 40” Y axis travel -20” Z axis travel- 26” Throat distance / Spindle to column- 21” Spindle to table- 4” / 30” Min/Max Spindle taper- CAT40 Spindl...
,
2005 Milltronics ML 16
- Manufacturer: Milltronics
- Model: ML16
CNC Engine Lathe -EQUIPPED WITH- Pragati 8 Station Turret 8” Chuck 3 Point Steady Follower Steady RS-232 Port Ethernet Connection All Manuals Machine Hours: 2,940
Town of Rockingham, VT
2007 Milltronics ML16
- Manufacturer: Milltronics
- Model: ML16
CNC Engine Lathe -EQUIPPED WITH- 6 Station Turret Control: Centurion 7 | Series: B | Swing over ways: 17" | Swing over cross slide: 7.48" | Swing over gap: 25.9" | Length of gap: 12.75" | Max center distance: 48"...
Town of Rockingham, VT
2014 MILLTRONICS RH33
- Manufacturer: Milltronics
- Model: RH33
- Spindle taper: ISO 40
Tool Changer: X axis travel: 78" | Y axis travel: 33" | Z axis travel: 28" | Rapid rate x axis: 800 IPM | Rapid rate y axis: 800 IPM | Rapid rate z axis: 600 IPM | Table size: 86 x 32 | Max table load: 3,500 LBS ...
Milltronics ML15 CNC Lathe
- Manufacturer: Milltronics
- Model: ML15
Good condition Milltronics ML15 CNC Lathes manufactured in 2002. Located in USA and other countries. Click request price for more information.
USA
Tip: Enter manufacturer, model or keyword
