Oil, Gas & Mining » Mineral Processing

Search By Manufacturer

Search By Country

Building Filters

12928

Used process engineering

  • Trusted Seller
    5ft x 11ft 3-Deck Wash

    5ft x 11ft 3-Deck Wash Plant

      Comes with Trailer: Steel Deck Steel Ramps Tandem Axle

      Western United States, USA
    • Trusted Seller
      Action Mining M10 Wave Table

      Action Mining M10 Wave Table

      • Manufacturer: Action Mining

      Recovery: Recovery of Gold Particles Ranges between 10 Mesh and Microscopic Recovery of Gold from Classified Black Sand ranges from 80-99% Adjustable Table Tilt and "Bump" Overall Dimensions:

      Western United States, USA
    • Trusted Seller
      Agitair 4-Cell Flotation Cell

      Agitair 4-Cell Flotation Cell

      • Manufacturer: Agitair

      Of cells: Bank of 4 Cells | Drive: General Electric Motor | Power output: 15HP | Voltage: 230/460 Volt | Current: 42.4/21.2 Amps | Frequency: 60Hz | Phase: 3-Phase

      Western United States, USA
    • Trusted Seller
      Denver Flotation Cells

      Denver Flotation Cells

      • Manufacturer: Denver

      With Catwalk Of cells: 2 Cells Per Bank | Drive: WEG Electric Motor (1 Motor Per 2 Cells) | Power output: 10HP | Voltage: 208-230/460 Volt (Usable @ 380 Volt) | Current: 27.9-25.3/12.6 Amps (15.3 A @ 380 Volt) | ...

      Western United States, USA
    • Trusted Seller
      26in IRD Pan American Duplex

      26in IRD Pan American Duplex Mineral Jig

      • Manufacturer: I.R.D Inc.

      Max Capacity: Average Hutch Water Required: Average Length of Stroke: Average RPM Eccentric Shaft: Overall Dimensions:

      Western United States, USA
    • Trusted Seller
      Hy-G 30 inch Centrifugal Mineral

      Hy-G 30 inch Centrifugal Mineral Concentrator

      • Manufacturer: Hy-G

      Approximate Specifications Based on Model Year: Outlet Tailing Pipe 8" diameter with Victaulic groove 480 volt 3 phase 60 Hz Tails Lining Abrasion Resistant alloy steel

      Western United States, USA
    • Trusted Seller
      4ft. 7in. wide x 5ft.

      4ft. 7in. wide x 5ft. 10in. long Hopper Shaker Deck

        Includes Water Jets Skid Mounted 5ft. 5in. Overall Height Grill Opening 3ft. x 4ft. Solid Rod Steel Comes with: 110 Volt Motor Sluice Tray Extra Mining Parts

        Western United States, USA
      • Trusted Seller
        4ft x 11ft 2-Deck Wash

        4ft x 11ft 2-Deck Wash Plant

          Decks: 2 Decks | Throughput capacity: Approx. 80 YPH | Deck sizes: 4ft Wide x 11ft Long | Drive: Electric Motor | Power output: 1HP | Voltage: 120 Volt | Phase: Single Phase

          Western United States, USA
        • Trusted Seller
          Agitair Flotation Cells

          Agitair Flotation Cells

          • Manufacturer: Agitair

          Of cells: 2 Cells Per Bank | Drive: Yaskawa Electric Motor (1 Motor Per 2 Cells) | Power output: 20HP | Voltage: 230/460 Volt (Usable at 208 Volt) | Current: 46/23 Amps | Frequency: 60Hz | Phase: 3-Phase

          Western United States, USA
        • Trusted Seller
          Mill, SAG, 32' x 12',

          Mill, SAG, 32' x 12', Hardinge-Koppers, 6800 HP Dual Drive #D744636

          • Manufacturer: Hardinge

          32' x 12' SAG mill, manufactured by Hardinge-Koppers, driven by dual GE 3400 HP 4000 V, 60 Hz AC wound rotor induction motors, model 108770. Complete with trunnions, trunnion liners, girth gear, pinion assemblies...

          Canada
        • Trusted Seller
          Mill, Sag, 13'6" X 4',

          Mill, Sag, 13'6" X 4', Marcy, No Motor, #D739647

          • Manufacturer: Marcy

          Marcy Dry Grind SAG Mill, 13' 6" Diameter x 4' Long. Includes bull gear, pinion gear, large Falk gearbox, air clutch, and lube set. No motor. Manufactured new in 1988.

          Canada
        • Trusted Seller
          Mill, Sag, 38' X 25'5",

          Mill, Sag, 38' X 25'5", Metso, 26,016 HP, Unused #D739643

          • Manufacturer: Metso

          Unused Metso sag mill, 38' (11.58 m) diameter x 25' 5" (7.76 m) long, 26,016 HP (19,400 kw) Siemens wrap around drive motor-operating frequency 50/60 Hz. EGL: 22' (6.7 m), mill speed: 7.5-10.08 RPM. Maximum volum...

          Canada
        • Trusted Seller
          Mill, Sag, 40' X 25',

          Mill, Sag, 40' X 25', FL Smidth, 34,866 HP, Unused #D739644

          • Manufacturer: FL Smidth

          Unused FL Smidth SAG mill, 40' diameter x 25' length, designed for 34,866 HP (26,000 kW) wrap-around GMD motor (motor not included). No liners included.

          Canada
        • Trusted Seller
          Spinktek ST-11-3 Disc Filter, Stainless

          Spinktek ST-11-3 Disc Filter, Stainless Steel #4444671

          • Manufacturer: Spinktek Systems

          Spintek Systems Model number ST-11-3 stainless steel disc filter. Equipment is driven by under-mounted drive, direct connected to spinning discs. Rated for 3-phase, 60-cycle, 460 volt, 70 PSI. Unitized on portabl...

          California, USA
        • Trusted Seller
          Denver D-1 Lab Flotation Cell

          Denver D-1 Lab Flotation Cell

          • Manufacturer: Denver

          Tachometer Not Installed Stainless Steel Wetted Parts (Urethane impeller and diffuser). Comes with 750mL Stainless Steel Tank

          Canada
        1718192021

        Overview

        Mineral processing involves the extraction and processing of minerals from ores to obtain a more refined product. This category encompasses various machinery such as crushers, screens, and separators that are used to break down, sift, and separate valuable minerals from waste material. These machines are essential in mining operations to ensure the efficient and effective retrieval of valuable minerals.

        FAQ

        What should I consider when buying used mineral processing equipment?

        Consider the equipment's age, wear and tear, capacity, and any available maintenance records. It's also important to ensure that the machinery meets current industry standards and safety regulations.

        How is mineral processing equipment typically shipped?

        Mineral processing equipment is usually shipped via freight carriers that specialize in heavy machinery. Ensure the equipment is properly secured and protected during transit to prevent damage.

        What maintenance is required for mineral processing equipment?

        Regular maintenance includes inspecting and cleaning components, checking for wear and tear, lubricating moving parts, and replacing worn-out parts. Following the manufacturer's maintenance schedule is crucial for optimal performance and longevity.