Building Filters

1996 Mitsui Seiki HU63
- Manufacturer: Mitsui Seiki
- Model: HU63
FANUC16M BT50 ATC120 630 angles, spindle speed 6000 rpm, stroke: X900 Y800 Z800 2 pallets, optional indexing, center through, touch sensor, with chip conveyor, with tool length measuring device If there is any di...
Tatebayashi, Japan
1981 MITSUI SEIKI MJG-3
- Manufacturer: Mitsui Seiki
- Model: MJG-3
Table size 600 x 300 with XY digital scale If there is any discrepancy between the contents and the actual product, the actual product will be given priority.
Tatebayashi, Japan
2008 Mitsui Seiki Vertex 550-5X
- Manufacturer: Mitsui Seiki
- Model: Vertex 550-5X
FANUC 31i-A5 BBT40 ATC40 Table size Φ400 Spindle speed 25000 rpm Stroke: X550 Y600 Z500 A+15° to -105° C±360 Pull stud JIS With rear tip contact With tool length measuring device Center through With fire extingui...
Tatebayashi, Japan
1978 MITSUI-BRUDERER BSTA-25
- Manufacturer: Mitsui Seiki
Roll feeder Roll Feeder BBV 202/120 Current status: Finished Overhaul | Power: 25t | Stroke length: 13 - 38 mm | Spm: 100-1500 | Dh: 239 / ST 13 mm 226.5 / ST 38 mm | Aj: 51mm | Bolstor: 530/530/85 | Slide: 438(5...
Ibaraki, Japan- Trusted Seller

2006 Mitsui Kosaku MSG-250H1
- Manufacturer: Mitsui Seiki
- Model: MSG-250H1
Machine Specifications ○ Operation type Semi-automatic type Table left/right automatic Chuck Tilting type, electromagnetic magnet Dimensions 300mm (width) x 120mm (depth) x 100mm (height) ○ Travel Table stroke 50...
Tokyo, Japan 
1979 MITSUI-BRUDERER BSTA60H
- Manufacturer: Mitsui Seiki
Feeder: BBV202/120 | Warehause: Ibaraki Plant | Current status: Repaired | Power: 60t | Stroke length: Selection formula 20, 25, 31, 38, 45, 51, 58, 64, 70, 76 | Spm: 100 - 800 | Dh: When the stroke is 20 mm 213...
Ibaraki, Japan
1980 MITSUI-BRUDERER BSTA60HL
- Manufacturer: Mitsui Seiki
Roll feeder Roll Feeder BBV 202/120 Left side only on Left side
Ibaraki, Japan
1985 MITSUI-BRUDERER PB60HL
- Manufacturer: Mitsui Seiki
Sankyo V60 on Left side only Current status: As it is | Power: 60t | Stroke length: 20 - 76 mm | Spm: 100 - 650 | Dh: 265 - 293 mm | Aj: 80mm | Bolstor: 770 x 620 | Slide: 890 x 458 | Motor: 22kw | Oil cooling de...
Ibaraki, Japan
Mitsui High-Tech MSG-250M
- Manufacturer: Mitsui Seiki
- Model: MSG-250M
Chuck size 270 x 125 with biaxial digital scale with dust collector If there is any discrepancy between the contents and the actual product, the actual product will take priority.
Tatebayashi, Japan
1999 Mitsui Mining Co.
- Manufacturer: Mitsui Seiki
- Horsepower: 7 hp
Tank capacity: 3.2L Agitator speed: 430 to 650 rpm Remarks Instruction manual available
Hiroshima, Japan
2003 Mitsui Mining FM150L
- Manufacturer: Mitsui Seiki
Capacity: 150L With control panel Power: 30kw/15kw | Material: Wetted part SUS | Quantity saved: One
Hiroshima, Japan
Mitsui Miike MIE 70/50-FVD
- Manufacturer: Mitsui Seiki
55/37kw/400V Pole change motor For Henschel Mixer Power: 55 / 37kw | Quantity saved: One
Hiroshima, Japan
2008 Mitsui Mining MA15SE
- Manufacturer: Mitsui Seiki
Explosion-proof. Grinding tank capacity: 100L, atmospheric pressure. Jacket design pressure: 0.05MPa. Grinding ball type: SUj2. Base throughput: 20L (maximum 50L). ★ Spare agitator included ★ Control panel included
Hiroshima, Japan
Mitsui Miike Kakoki MA15SE
- Manufacturer: Mitsui Seiki
Motor: 5.5 / 1.5kw Container capacity: 100L Rotation speed: 120 / 30rpm Processing volume: 30-50L / batch Explosion-proof specification
Hiroshima, Japan![[Mitsui Miike (now Nippon Coke)]](https://i.machinio.com/thumb/96vas/385266613/ddf6/mitsui-miike-now-nippon-coke-cooler-mixer-no-model.jpg)
[Mitsui Miike (now Nippon Coke)] Cooler mixer No model
- Manufacturer: Mitsui Seiki
1000L Remarks. If serviced. It will be clean, please don't worry.
Hiroshima, Japan
Mitsui Seiki Vertex 550-5X Machining Center
- Manufacturer: Mitsui Seiki
- Model: Vertex 550-5X
Good condition Mitsui Seiki Vertex 550-5X Machining Centers available between 2008 and 2018 years. Located in Canada and other countries. Click request price for more information.
Canada
