- Trusted Seller
MixMor Inc. 1.5HP Portable Geared Mixer Drive Model G-15
- Manufacturer: MixMor
ITEM #: 20497 Used MixMor Inc. 1.5HP Portable Geared Mixer Drive Model G-15 Serial No: 70980-6Heavy-duty mixer with C-face direct drive mounted to a cast aluminum helical gearbox.Installed with optional flange/ba...
$928 USDMillwood, WV - Trusted Seller
Mix-Mor D-13 Accumix Tank Mixer Clamp-On Agitator Drive 115V Variable Speed
- Manufacturer: MixMor
In Good Working Condition. Mix-Mor D-13 Mixer with Accumix Variable Speed Controller. 1/3Hp 1750 RPM 90VDC 56C Motor CDP3320. 30" Mixer Shaft Length. 8" Impeller Dia. If this item ships as Flat Rate Freight pleas...
$800 USDMillersburg, IN - Trusted Seller
Mixmor Model G-14 clamp style geardriven agitator
- Manufacturer: MixMor
Used Mixmor Model G-14 clamp style geardriven agitator. Driven by 1/3 HP 1/60/115-230 volt motor. 1725 RPM input, approximately 350 RPM output. Approximately 24" stainless steel shaft no impeller. FOB: Wilmington...
Wilmington, NC - Trusted Seller
Mix Mor 3 HP Mixer MX2778
- Manufacturer: MixMor
Mix Mor 3 HP Mixer MX2778 Weight: 150 lbs | Tested by: RV | Hp: 3 | Rpm: 1750 | Shaft length: 1.50" | Clamp: Bolt On | Volts: 208-240/460
$1,550 USDSparta, MI - Trusted Seller
Mix Mor .75 HP Mixer MX2777
- Manufacturer: MixMor
Mix Mor .75 HP Mixer MX2777 Weight: 150 lbs | Tested by: RV | Hp: 0.75 | Rpm: 1725 | Shaft length: 1.50" | Clamp: Bolt On | Volts: 208-240/460
$1,250 USDSparta, MI - Trusted Seller
Mixmor G15 Agitator Drive Assembly #35272
- Manufacturer: MixMor
Mixmor G15 Agitator Drive Assembly With (2) 3-vane Stainless Steel Propellers, 1 Hp AC Motor
Fitchburg, MA 
Stainless MixMor Mixers - Model OG-15
- Manufacturer: MixMor
Stainless MixMor Mixers - Model OG-15 (2) AVAILABLE - $750 EACH
$750 USDSpringfield, MA
MIXMOR AGITATOR
- Manufacturer: MixMor
ONE (1) USED CLAMP ON AGITATOR; MFG. MIXMOR; MODEL G-34; SN: 68863-1; SHAFT: 3/4" X 5-0'; TWO SETS OF 3 BLADE TURBINE IMPELLERS; MOTOR: 2 H.P. BALDOR; VOLTS: 208-230/460; AMPS: 6.5-6/3; RPM: 1735; FRAME: 56C; PHA...
Houston, TX- Trusted Seller
Mixer, Agitator, 0.33 HP, MixMor, Mdl GVS-13 #S743038
- Manufacturer: MixMor
MixMor Gear Drive Mixer, Model GVS-13. Includes a 0.33 HP, 90-volt motor running at 1750 RPM. Flange mount design with a 5/8" shaft diameter. Does not include shaft and propeller. Serial number 10852-7.
San Dimas, CA - Trusted Seller
Mixer, Agitator, MixMor, S/st, Clamp on style, Mdl D14 #C738805
- Manufacturer: MixMor
MixMor Clamp-On Stainless Steel Agitator, Model D14 - Powered by 0.5 HP motor, features 5/8" diameter x 42" long shaft with 4" diameter propeller. Shaft is damaged.
San Dimas, CA - Trusted Seller
Mixer, Agitator, 2 HP, MixMor, Model OD-2, Fixed Mount (2) #S745083
- Manufacturer: MixMor
(2) MixMor fixed-mount top-entering mixers, Model OD-2. Designed for 1-1/4" diameter shafts. Driven by 2 HP, 230/460V, 3-phase, 60Hz, 1730 RPM motors rated for hazardous environments. Serial number 62638-2.
San Dimas, CA - Trusted Seller
MixMor model G-14 clamp on mixer
- Manufacturer: MixMor
MixMor model G-14 clamp on mixer, serial number 64114-4, 2 each 6-1/2" diameter mixing paddles, 34" mixer shaft length, Accumix variable speed controls, 1/2 HP direct current electric motor direct drive, 1750 RPM...
Lodi, CA 
Mix Mor 3 HP Mixer MX2778
- Manufacturer: MixMor
Tested by: RV | Hp: 3 | Rpm: 1750 | Shaft length: 1.50" | Clamp: Bolt On | Volts: 208-240/460
$1,550 USDOceanside, CA
Mix Mor .75 HP Mixer MX2777
- Manufacturer: MixMor
Tested by: RV | Hp: 0.75 | Rpm: 1725 | Shaft length: 1.50" | Clamp: Bolt On | Volts: 208-240/460
$1,250 USDOceanside, CA- Trusted Seller
Hainesport, NJ
Tip: Enter manufacturer, model or keyword
