- Trusted SellerAuction
Beebe, ARVisit Auction Website 
LEBLOND F21 REGAL
used
- Manufacturer: Leblond
- Model: F21 REGAL
- Spindle Bore: 2.1875"
21"/22.25" x 72" LEBLOND "REGAL" ENGINE LATHE w/DIGITAL READOUTS Serial No 2F637, Model F21, Series "REGAL" EQUIPPED WITH: Digital Readouts 12" 3-Jaw Chuck w/Jaws Flame Hardened Bed Ways - (2) Steady Rests Quick ...
1981 DAEWOO-IKEGAI DA25
used
- Manufacturer: Daewoo
- Model: DA25
- Spindle Bore: 2.2"
25" x 120" DAEWOO-IKEGAI HIGH SPEED PRECISION ENGINE LATHE W/TAPER ATTACHMENT Serial No. 040059, Model DA25 EQUIPPED WITH: Taper Attachment 2.2" Hole Thru Spindle Inch-Metric Threading Capabilities Threading Dial...
- Trusted Seller
SHARP 1640LK ENGINE LATHE FULLY TOOLED WITH BISON 3-JAW CHUCK, STEADY REST, NEWALL DIGITAL READ OUT, VARIABLE SPEED, 3 1/16" SPINDLE BORE
new
- Manufacturer: Newall
SHARP 1640LK ENGINE LATHE FULLY TOOLED WITH BISON 3-JAW CHUCK, STEADY REST, NEWALL DIGITAL READ OUT, DIGITAL VARIABLE SPEED, 3 1/8" SPINDLE BORE STANDARD EQUIPMENT: Bison 3-Jaw Chuck 10” Coolant System Halogen Wo...
CADILLAC CM1440
used
- Manufacturer: Cadillac
- Spindle Bore: 1.53"
14″ x 40″ Cadillac Engine Lathe Manufacturer: 5C Collet Closer Foot brake Coolant pump Chip pan Swing over bed 14" Swing over cross slide 8-1/4" Distance between centers 39-1/2" Spindle bore 1-17/32" Taper of spi...
LEBLOND 14 HEAVY-DUTY
used
- Manufacturer: Leblond
- Model: 14 HEAVY-DUTY
- Spindle Bore: 1.34"
14"/16.5" x 102" LEBLOND "HEAVY-DUTY" ENGINE LATHE w/TAPER ATTACHMENT & DIGITAL READOUTS Series "14 HEAVY-DUTY" EQUIPPED WITH: Collet Chuck w/Collets Taper Attachment 12" 3-Jaw Chuck Steady Rest - Follow Rest Pow...
LODGE & SHIPLEY Rxe2516
used
- Manufacturer: Lodge & Shipley
- Model: RXE2516
- Spindle Bore: 2.5"
25"/26.5" x 96" LODGE & SHIPLEY "POWERTURN" GAP-TYPE ENGINE LATHE Serial No 49966, Model RXE 2516, Series "POWERTURN" EQUIPPED WITH: 20" 4-Jaw Chuck w/Jaws - Steady Rest - 8"-D1 Spindle Nose Gap Block & Gap Carri...
SOUTH BEND CL150E
used
- Manufacturer: South Bend
- Model: CL150E
- Spindle Bore: 2.0312"
15" X 56" SOUTH-BEND "NORDIC 15" GEARED HEAD ENGINE LATHE Serial No. DN15770731N67, Model CL150E Series "Nordic 15" EQUIPPED WITH: Taper Attachment 8" 3-Jaw Chuck w/Jaws - Steady Rest Geared Head w/Hardened & Gro...
- Trusted Seller
Kerrey 17" x 55" Gap Bed Engine Lathe
used
- Spindle Bore: 2-1/8"
- Distance between Centers: 55"
Swing over bed: 17" | Swing in gap: 24.8" | Distance between centers: 55" | Spindle bore: 2-1/8" | Spindle nose (camlock): D1-6" | Spindle speed range (12): . 31 - 1,520 rpm | Longitudinal feed range (32): . 0.0...
Massachusetts, USA - Trusted Seller
2025 1340VS-K
used
SPECIFICATIONS: • Swing Over Bed 13” • Swing Over Cross Slide 8-5/16” • Swing Over Gap 18-1/2” • Width Of Bed 7-1/2” • Width of Gap 9.25” • Distance Between Centers 40...
Elk Grove Village, IL 
Acer E-Lathe 1760G Engine Standard Bore Inverter Lathe
new
- Manufacturer: Acer
- Model: E-Lathe 1760G
Acer E-Lathe 1760G Engine Lathe , Infinite 25-2200 (3 gear range) constant spindle speed. Easy change in no time (4 sec). High efficient 7.5 HP spindle motor for high torque output. Accept both single phase and t...
Watertown, CT- Trusted Seller
32 Sidney 32 Engine Lathe - 24" x 76"
used
Model 32, S# 9784, 24" Swing, 76" Between centers, 12" 3 jaw chuck w/ reversible jaws, X/Y DRO, 32 spindle speeds from 15 to 1,000 rpm, Taper attachment, Flip down safety shield over chuck, Heavy duty tailstock, ...
- Trusted Seller
1991 Rockland 19" x 80" Gap Bed Engine Lathe
used
- Distance between Centers: 80"
- Spindle Nose: D-1-8
Swing over bed: 19" | Swing over cross slide: 10-3/4" | Swing in gap: 27" | Distance between centers: 80" | Spindle nose (camlock): D-1-8 | Hole through spindle: 4-1/8" | Spindle speeds (12): 22 – 1,500 rpm | Lo...
Massachusetts, USA - Trusted Seller
1954 BETTS 93 x 580
used
- Manufacturer: BETTS
Betts Engine Lathe – SN 57R-724 Includes several closed steady rests (20” & 48”) as well as an assortment of tool holders 100 HP DC spindle motor (rectifier included) Machine can be inspected in Toledo Ohio.
Louisville, KY - Trusted Seller
1952 AXELSON 16”
used
- Manufacturer: AXELSON
ONE USED - 18” x 78”cc AXELSON Engine Lathe 18” Swing Over Bedways 11” Swing Over Cross Slide Hardways Taper Turning Attachment Inch Threading Spindle Speeds from 13 to 1577 RPM 1.75” Hole Thru Spindle 12” Diame...
Aurora, IL
Tip: Enter manufacturer, model or keyword