- Trusted Seller
BATTENFELD BA 600 CDC
used
- Manufacturer: Battenfeld
- Model: BA 600 CDC
The was built in Austria in 2002. It is equipped with control. It has a closing force of 600 kN forms. The screw diameter is 33 mm and the injection volume is 99 cm3. The machine has plates for mounting injection...
- Trusted Seller
VICTOR MSZ 30
used
- Manufacturer: Victor
was produced in 2015. The machine is used to produce bottles with a maximum height of ≤190mm and a maximum diameter of ≤100mm. It has a screw with a diameter of 40 mm, running at a speed of 10 to 225 revolutions ...
- Trusted Seller
ZWUT PSK-1
used
- Manufacturer: ZWUT
was manufactured in Poland. The furnace is used for various types of laboratory and industrial work. The heating chamber of the furnace is resistant to high temperatures, thanks to fireclay and thermal insulation...
$823 USDJelenia Góra, Poland - Trusted Seller
GT85 GT 2000-3P ultrasonic cleaner
used
The was manufactured in 2008. The machine consists of three bathtubs – the first bath is used for washing and phosphating, the second bath is used for rinsing and the third bath dries the product. The washing bat...
- Trusted Seller
MAYER & MAYER DXR R2020R L-P-PUB PDX20 40-100 P
used
- Manufacturer: Mayer
of German manufacture was manufactured in 2015. The device is a filling station for hand-held dispensers with two-component glue with low and medium viscosity. The glue is loaded from pails or drums with a capaci...
- Trusted Seller
ATLAS COPCO FX 7
used
- Manufacturer: Atlas-Copco
- Model: FX 7
was built in 2014. This reliable, cost-effective and easy-to-use device effectively dries compressed air of oil, moisture and water vapour, eliminating the risk of the formation an oily deposit which is dangerous...
$1,926 USDJelenia Góra, Poland - Trusted Seller
BATTENFELD TM 1300
used
- Manufacturer: Battenfeld
was built in 2004 in Austria by BATTENFELD GmbH. The machine is used for the economical mass production of plastic parts of various colours, shapes and sizes. The workpieces are produced using the injection mould...
$4,126 USDJelenia Góra, Poland - Trusted Seller
KEPKA CT 900 ET tunnel kiln
used
was built in 2009 in Poland by the Kepka Group. The machine is designed for firing any type of decoration on glass and ceramics at a maximum temperature of 900°C. The working chamber is heated by a system of spir...
- Trusted Seller
WALTER SF 37 KS
used
- Manufacturer: Walter
The was built by the Polish company WALTER Kompressortechnik in 2014. The 37 kW freestanding screw compressor is equipped with a direct drive and inverter. The capacity at an operating pressure of 10 bar is 5.8 m...
- Trusted Seller
AIRPOL 15
used
- Manufacturer: Airpol
- Model: 15
The was produced in Poland in 2008. The 15 kW machine has a capacity of 5.8 m3/min at working pressure of 10 bar. The machine motor rotates at 3000 rpm. The total weight of the screw compressor is 340 kg.
$1,926 USDJelenia Góra, Poland - Trusted Seller
PONAR ŻYWIEC SG-180FE-2B
used
- Manufacturer: PONAR ŻYWIEC
built in 2011, is designed for crushing of plastic waste. Made of high quality steel, the plastic mill with dust exhaust ensures high rigidity of construction, high efficiency and long service life. The main adva...
$1,252 USDJelenia Góra, Poland - Trusted Seller
RUIAN KODA MACHINERY ENG-500
used
- Manufacturer: RUIAN KODA MACHINERY
, manufactured in China in 2020 is dedicated to the production of foil products i.e. breakfast bags or disposable gloves, using interchangeable sealing moulds. The robust steel body of the film glove production l...
- Trusted Seller
MARK RMB 18 IVRD
used
- Manufacturer: Mark
was built in 2020 in Italy. The machine, consisting of reliable components, a robust housing and an easy-to-use control panel, delivers the highest quality compressed air, free of water vapour that is harmful to ...
2000 Pellegrini continuous flaming machine with propane gas
used
- Manufacturer: Pellegrini
For sale the Pellegrini continuous flaming machine with propane gas. Automatic processing line for very high quality production of flamed stone strips , slabs and tiles.
Lubiechowa, Poland- Trusted Seller
2010 Engel DUO 5550/1100
used
- Manufacturer: Engel
• Fixed platen: 2 hydraulic cores + 1 pneumatic core • Moving platen: 1 hydraulic core + 1 pneumatic core • Hot runner control: 32 zones • Mold cooling system: 20 rotameters, 20 thermometers • 2 mold blow-off val...
Wrocław, Poland
Tip: Enter manufacturer, model or keyword
