Building Filters
- Trusted Seller
2019 CAT C4.4
- Manufacturer: Caterpillar
- Model: C4.4
- Horsepower: 109 hp
- Aspiration type: Turbocharged Aftercooled
2019 Caterpillar C4.4 diesel engine, turbocharged, air to air aftercooled, 142 HP at 2200 RPM rating, tier 4 final emissions, emissions family KPKXL04.4MT1, arrangement # 579-1298 (5791298,) UNUSED/NEW factory su...
- Trusted Seller
2025 Midland Machines SPR-6
- Manufacturer: Midland
- Fuel type: diesel
2025 Midland Machines SPR-6 Single-Sided Self-Propelled Road Widener The SPR-6 is a road widener that complies with legal width in transport mode, eliminating the need for permits during transportation on any day...
- Trusted Seller
2023 VÖGELE MINI 500
- Manufacturer: Vögele
AB135V Screed Working width hydraulically adjustable from 0.80 to 1.35 m Paving thickness up to 10 cm Gas heating with 3 burners and electronic ignition Rubber-bonded steel tracks Engine: Kubota Z602-E4B-EU-X7 (2...
Konz, Germany - Trusted Seller
2023 VÖGELE MINI 500
- Manufacturer: Vögele
AB135V Screed Working width hydraulically adjustable from 0.80 to 1.35 m Paving thickness up to 10 cm Gas heating with 3 burners and electronic ignition Rubber-bonded steel tracks Engine: Kubota Z602-E4B-EU-X7 (2...
Konz, Germany 
20 Moulds for 5-block press
- Manufacturer: Quadra
20 used moulds for blocks, slabs and paving stones for 6-block presses Small adaptation possible to fit on all 6 blocks presses Here, they are moulds for Quadra Q6 press
Gonsans, France
Moulds for 5-block press
20 Block and Hourdis moulds for 5-block presses Small adaptatatioh to fit on all 5 blocks presses Here are moulds for MMH6 Brouiller press And there is the whole range of blocks and Hourdis in 20 and 25 cm high S...
Gonsans, France
Robol Concrete Block Palletizing System
KUKA 500-570 Palletizing Robot Palletizing robot for blocks Brand: KUKA Model: 500-570 Training console included Very good condition Minimum price
Gonsans, France
Nozzle machine Ø200 to Ø600
Nozzle machine Ø200 to Ø600 / Equipped in Ø200,400,500 and Ø600 Small machine for nozzle production / length 1 meter Half-thickness gaskets Equipped in Ø200,400,500 and Ø600 except Ø300 The Ø300 is produced on an...
Concrete block rectification line
For Concrete Blocks Complete concrete block grinding unit (top/bottom) Accuracy = 0.3 mm in height This calibration minimizes horizontal joints and eliminates "ghost joints" (where the blocks are simply glued tog...
Gonsans, France
Testing laboratory for concrete blocks
Presse d'écrasement pour Blocs et Eprouvettes Béton Matériel de marque 3R Presse d'écrasement + pupitre Quantris Possibilité d'écraser les blocs de 37 cm de large !! + Bac chauffant pour le souffre FICHE-DE-MISE-...
- Trusted Seller
Dynapac F80
- Manufacturer: Dynapac
- Model: F80
MINIFINISHER DYNAPAC F80Bank 80/135 cm Gas heating Hopper overhangs Mechanical widening to 165 cm Paving restrictors Ideal for track work, fiber optics, gas, enel, waterworks, bike lanes. ON OUR SITE ROLLERFINISH...
Matera, Italy - Trusted Seller
2004 Dynapac F5C
- Manufacturer: Dynapac
- Model: F5C
- Horsepower: 44 hp
- Operating weight: 5,400 kg
FINISHER DYNAPAC F5C Year 2004. 4600 hours Bench 1.20/2.40 mt Gas heating with automatic thermostat Press and Vibrator CE standards Possibility of inserting clamps for 1 mt bands ON OUR ROLLING MACHINES WEBSITE Y...
Matera, Italy - Trusted Seller
2018 Dynapac SD2500WS
- Manufacturer: Dynapac
- Model: SD2500
- Horsepower: 173 hp
- Hours: 2,800 h
DYNAPAC DYNAPAC SD2500WSA Year 2018 approx. 2800 hours 6 wheel drive Bench 2.55/5.10 m Electric heating Tamper and Vibration Heated sides Folding sides Electro/hydraulic sides Levelling system integrated into the...
Matera, Italy - Trusted Seller
Dynapac F80
- Manufacturer: Dynapac
- Model: F80
MINIFINISHER DYNAPAC F80Bank 80/135 cm Gas heating Hopper overhangs Mechanical widening to 165 cm Paving limiters Ideal for work on tracks, fibre optics, gas, enel, aqueducts, cycle paths. ON OUR FINISHERS ROLLER...
Matera, Italy - Trusted Seller
2004 Dynapac F5C
- Manufacturer: Dynapac
- Model: F5C
- Horsepower: 44 hp
- Operating weight: 5,400 kg
DYNAPAC F5CAnno 2004 FINISHER. Hours 4600 Bench 1.20/2.40 mt Gas heating with automatic thermostat Tamper and Vibrating CE Standards Possible to insert shrinkers for 1 mt bands ON OUR SITE ROLLERFINISHERS YOU CAN...
Matera, Italy