Building Filters
1991 Amada RG-35
- Manufacturer: Amada
- Model: RG-35
- Capacity: 38,000 kg
- Stroke length: 120 mm
38 Ton x 4.1' Hydraulic Press Brake Used Amada RG-35 (1991) CNC Press Brake for Sale. This pre-owned Amada CNC press brake is located in California. If you have any questions regarding this Amada Press Brake, p...
USA- Trusted Seller
2026 Witzco RG-35 TON/ 23 FT WELL
- Manufacturer: Witzco
- Gross weight: 86,213 kg
- Axle configuration: Tandem
NEW 35 TON LOW BOY TRAILER, TANDEM AXLE, SPRING SUSPENSION WITH EQUALIZER, 23 FT WELL, CHAIN TIE DOWNS, D-RINGS, HONDA PONY ENGINE, CHAIN/BINDER STORAGE, GROUND BEARING DETACH, FACTORY WARRANTY, PAD FOOT ON LIFT ...
- Trusted Seller
Amada RG-35S
- Manufacturer: Amada
- Model: RG-35S
- Capacity: 35,000 kg
- Stroke length: 80 mm
35 Tons x 4' amada RG-35S, Used #A7435 Capacity: 35 Tons x 4' | Tonnage: 35 | Weight (approx): 3,500 Lbs. | Distance between housings: 40.2" | Bending length: 49.3" | Distance between uprights: 40.2" | Throat de...
38 Ton Amada RG-35S CNC Press Brake
- Manufacturer: Amada
- Model: RG-35S
- Stroke length: 80 mm
- Throat depth: 200 mm
Year: 2001 Make: Amada Model: RG-35S Tonnage: 38 Tons Overall Length: 47.3" Between Housing: 40.2" Stroke: 3.94" Open Height: 14.57" Throat Depth: 7.88" Weight: 3,900lbs Dimensions: 5' x 4' x 7'H Equipped with: N...
Cerritos, CA
38 Ton Amada RG-35S CNC Press Brake
- Manufacturer: Amada
- Model: RG-35S
- Stroke length: 80 mm
- Throat depth: 200 mm
Year: 1984 Make: Amada Model: RG-35S Tonnage: 38 Tons Overall Length: 47.3" Between Housing: 40.2" Stroke: 3.94" Open Height: 14.57" Throat Depth: 7.88" Weight: 3,900lbs Dimensions: 5' x 4' x 7'H Equipped with: N...
Cerritos, CAAmada RG-35S Hydraulic CNC Press Brake with NC9-EXII Control
- Manufacturer: Amada
- Model: RG-35S
- Capacity: 35,000 kg
- Stroke length: 80 mm
“Excellent Working Condition!” 1995 Amada RG-35S Hydraulic CNC Press Brake Specifications: Capacity 35 tons -US Tons 38 Max. bending length 49.3" Table length 47.3" Distance between uprights 40.2" Throat depth 7....
Amada RG-35S CNC Press Brake with NC9-EXII Control and Lazersafe Light Curtains
- Manufacturer: Amada
- Model: RG-35S
- Capacity: 35,000 kg
- Stroke length: 80 mm
“Excellent Working Condition!” 1998 Amada RG-35S Hydraulic CNC Press Brake Specifications: Capacity 35 tons -US Tons 38 Max. bending length 49.3" Table length 47.3" Distance between uprights 40.2" Throat depth 7....
- Trusted Seller
1997 - 38 Ton Amada RG-35 CNC Press Brake
- Manufacturer: Amada
- Model: RG-35
- Capacity: 38,000 kg
- Stroke length: 120 mm
Equipped with: NC9EX-II 3-Axis CNC Control 2-Axis Programmable Back-Gauge Handwheel and Stand Full Length Foot Treadle (6) Tool Holders (2) Pneumatic Back-Gauge Fingers
California, USA - Trusted Seller
1988 - 38 Ton Amada RG-35 CNC Press Brake
- Manufacturer: Amada
- Model: RG-35
- Capacity: 38,000 kg
- Stroke length: 120 mm
Equipped with: NC9EX-II 3-Axis CNC Control 2-Axis Programmable Back-Gauge Handwheel and Stand Full Length Foot Treadle (2) Pneumatic Back-Gauge Fingers
California, USA - Trusted Seller
SCHIAVI RG 35-20
- Manufacturer: Schiavi
- Model: RG 35-20
Weight: 2370 kg | Power: 5.5 HP | Dimensions: 2050 x 1040 x 1920 mm
Nichelino, Italy - Trusted Seller
SCHIAVI RG 35/25 2500 X 35 TON PRESS BRAKE
- Manufacturer: Schiavi
NEW BLADES AND PRISMS, REBUILT INTERMEDIARIES, MANUAL REAR ADJUSTER WITH 2000 BAR PHOTOCELLS WORKING BUT NOT "CE" THE MACHINE HAS BEEN CLEANED AND CHECKED, IT IS QUIET AND HAS NO OIL LEAKS, THE PAINT IS ORIGI...
Lombardy, Italy ELEKTRA D1 00/HS-NFF35-D-RG9 DISCONNECT SWITCH, 25AMP 3POLE 500V. 4C-32
- Manufacturer: Elektra
Items are spares/engineering demo hookups that were pulled from an industrial working environment. We repair all types of industrial automation including AC Servo Drives, Servo Motors, Operator Interface Panels, ...
$40 USDDuncan, SC- Trusted Seller
SCHIAVI RG 35 x 2500 Hydraulic press brake
- Manufacturer: Schiavi
Distance between uprights 2050 mm Max. length: 2500 mm | Tn.: 35 | Gap frame: 200 mm | Power: 4,1 kW | Weight: 2700 Kg
Collegno, Italy - Trusted Seller
Big Tex 6.5 x 14 3K Single Axle 35SA
- Manufacturer: Big Tex
- Model: 35SA
- Axle: 1 axle
At a generous 77-inch wide, the 35SA Single Axle Utility Trailer from Big Tex is ideal for home and garden tasks and can even accommodate many side-by-side models. Highlights: Spring assisted ramp Demco EZ latch ...
Chehalis, WA 
1980 Amada RG-35S
- Manufacturer: Amada
- Model: RG-35S
- Stroke length: 80 mm
- Throat depth: 200 mm
35t Table length 1200 Stroke length 100 Gap depth 200 Open height 300 If there is a discrepancy between the contents and the actual product, the actual product will take precedence.
Tatebayashi, Japan
Schiavi RG 35-20 Press Brake
- Manufacturer: Schiavi
- Model: RG 35-20
Good condition Schiavi RG 35-20 Press Brakes. Located in Italy and other countries. Click request price for more information.
Italy
