Monarch Heavy Duty Engine Lathe, Model 32NN, Swing 41", 108" Between Centers, 40 HP,
- Manufacturer: Monarch
- Model: 32NN
- Spindle bore: 82.55 mm
Swing over bed ways: 51" | Swing over cross slide: 32" | Distance between centers: 109" | Spindle drive: 30 HP | Spindle speeds: 12-606 RPM | Chuck size: 36" | Spindle bore: 4." | Condition: Very Good | Equipped...
Georgia, USA- Trusted Seller
16 x 54 in. Monarch Lathe, DRO, Chucks, more
- Manufacturer: Monarch
- Model: 16
"Great condition, well maintained by experienced operators, normal wear from use!" 16″ x 54″ Monarch lathe, FULLY Equipped DRO, Taper, more. EQUIPPED: * Digital Read Out 2 axis * Taper turning attachment * 3 Jaw ...
$4,750 USDMontreal, Canada - Trusted Seller
MONARCH T TYPE #1802720
- Manufacturer: Monarch
- Model: T TYPE
Retrofitted in 2010 EQUIPPED WITH: New Electric PLC in 2010 60" Face Plate w/Jaws Transformer 4-Way Tool Post Coolant
Toledo, OH - Trusted Seller
MONARCH 36NN #0889225
- Manufacturer: Monarch
- Model: 36NN
Swing over bed: 54" | Swing over cross slide: 36" | Distance between centers: 228" | Spindle speeds: 42-202 | Chuck diameter: 39" 4 JAW | Thru hole: 2" | Taper attachement: YES | Steady rest: YES, 16", 12", FOLL...
Toledo, OH - Trusted Seller
MONARCH 62 #0628822
- Manufacturer: Monarch
- Model: 62
- Spindle bore: 50.8 mm
3 Swing over ways: 18" | Swing over carriage: 12" | Distance between centers: 60" | Spindle speeds: 14 TO 1750 RPM | Spindle hole: 2" | Threads: 2 TO 120 TPI | Feeds: .0011 TO .0683 | Jaw chuck: 12" | Steady rest...
Toledo, OH - Trusted Seller
12.5” x 20” Monarch 10EE Precision T0olroom Lathe
- Manufacturer: Monarch
- Model: 10EE
- Spindle bore: 44.45 mm
12.5” x 20” Monarch 10EE Precision T0olroom Lathe Features In Like New Condition Taper attachment 3-jaw chuck 4 jaw chuck 6-jaw chuck Faceplate English & metric threading Microcarriage stop Thread dial Specificat...
Granger, IA - Trusted Seller
Monarch Heavy Duty Dyna-Shift 48″ x 108″ Lathe
- Manufacturer: Monarch
- Model: Dyna Shift
MONARCH HEAVY DUTY DYNA-SHIFT LATHE 48″ X 108″ Catalogue Size 2502 New 1957 EQUIPPED WITH: Newall 2-Axis Digital Readout 20″ 3-Jaw Chuck and 28″ 4-Jaw Chuck Hydraulic Shifting of Headstock Speeds Rapid Traverse o...
- Trusted Seller
35" x 12' MONARCH ENGINE LATHE
- Manufacturer: Monarch
- Model: Dyna Shift
PRICE: Loaded on Truck, Our Warehouse, York, PA ………… $29,500.00 HMC Stock # 22170 Machine Serial No.: 44561-AT Machine Model No.: 2516-20 x 144 Series 80 Dyna Shift New Date: November 1960 Swing Over Bed Way...
- Trusted Seller
1967 MONARCH 612 19'' X 96'' ENGINE LATHE
- Manufacturer: Monarch
- Model: 612
1967 MONARCH 612 19'' X 96'' ENGINE LATHE MANUFACTURER: MONARCH MODEL: 612 SERIAL NO.:48593 MFG DATE: 02/1967 POWER: 440V 3PH 60HZ Swing: 28'' Centers span: 96'' Spindle through-hole: ~2.06'' Spindle nos...
Buffalo, NY - Trusted Seller
Monarch 20" x 96" Toolroom Lathe Series 60
- Manufacturer: Monarch
- Model: SERIES 60
Equipped with: 3 jaw chuck w/reversible jaws 4 way tool post Large capacity roller type steady rest Newall 2 axis DRO *Feeds are in millimeters* **Machine is USA built but shipped to Germany**
- Trusted Seller
Monarch 10"EE 12.5" x 20"
- Manufacturer: Monarch
- Model: 10EE
Model 10"EE, S# 34715, Date Mfg. 12/1951, Actual swing 12.5", 20" Between centers, 6 Jaw & 4 jaw chucks, 1.5" Thru hole, Updated variable speed drive, Variable spindle speeds from 0 to 2,500 rpm, Taper attachment...
Hugo, MN - Trusted Seller
1966 Monarch 10" x 20" Super Precision Toolroom Lathe 10EE
- Manufacturer: Monarch
- Model: 10EE
Equipped with: 3 jaw chuck Taper attachment Maximum swing over bed: 12-1/2" | Distance between centers: 20" | Swing over cross slide: 7-1/4" | Spindle speeds: 25-1750 RPM | Spindle through hole: 1-13/32" | Tape...
- Trusted Seller
Monarch 10"EE 12.5" x 30"
- Manufacturer: Monarch
- Model: 10EE
Model 10"EE, S# 44626-AT, Date Mfg. 12/60, Updated & reconditioned, Actual swing 12.5", 30" Between centers, 7.5" 3 Jaw Adjust Tru Buck chuck w/ reversible jaws, 1.5" Thru hole, AC Vector drive, Variable spindle ...
- Trusted Seller
Monarch 10"EE 12.5" x 30"
- Manufacturer: Monarch
- Model: 10EE
Model 10"EE, S# 44627, Updated & reconditioned in 1993 by Monarch, Actual swing 12.5", 30" Between centers, 3 Jaw Adjust Tru Buck chuck w/ reversible jaws, 1.5" Thru hole, AC Vector drive, Variable spindle speeds...
- Trusted Seller
Monarch 10ee Lathe with DRO
- Manufacturer: Monarch
- Model: 10EE
Monarch 10ee Lathe with DRO come with a 3 Jaw Chuck Live Center Drill Chuck and Quick Change Tool holder Shipping is just an estimate it could be more or could be less depending on your location…please message m...
Tip: Enter manufacturer, model or keyword
