- Trusted SellerAuction
10" X 20" MONARCH TOOLROOM LATHE;S/N 44043, COLLET CHUCK, TAILSTOCK, 1-1/2" SPINDLE HOLE, SPINDLE
- Manufacturer: Monarch
10" X 20" MONARCH TOOLROOM LATHE;S/N 44043, COLLET CHUCK, TAILSTOCK, 1-1/2" SPINDLE HOLE, SPINDLE SPEED TO 4,000 RPM
Kokomo, INVisit Auction Website Monarch 18" lathe 18"BB 120"
- Manufacturer: Monarch
Nice lathe from local shop that closed down. Come check it out.
- Trusted Seller
MONARCH LATHE 18.5 X 102"
- Manufacturer: Monarch
MONARCH LATHE 18.5 X 102"WITH LOTS OF TOOLING CALL CALL FOR DETAILS AND MORE PHOTOS BEDWAYS ARE IN NEW CONDTIITON
- Trusted Seller
Monarch Lathe 18.5" swing by 102" between Centers w/ tooling Model 613
- Manufacturer: Monarch
Monarch Lathe 18.5" swing by 102" between Centers w/ tooling Model 613
- Trusted Seller
Monarch 20" x 96" Toolroom Lathe Series 60
- Manufacturer: Monarch
- Model: SERIES 60
Equipped with: 3 jaw chuck w/reversible jaws 4 way tool post Large capacity roller type steady rest Newall 2 axis DRO *Feeds are in millimeters* **Machine is USA built but shipped to Germany**
- Trusted Seller
MONARCH 62 #0628822
- Manufacturer: Monarch
- Model: 62
- Spindle bore: 50.8 mm
3 Swing over ways: 18" | Swing over carriage: 12" | Distance between centers: 60" | Spindle speeds: 14 TO 1750 RPM | Spindle hole: 2" | Threads: 2 TO 120 TPI | Feeds: .0011 TO .0683 | Jaw chuck: 12" | Steady rest...
Toledo, OH - Trusted Seller
MONARCH T TYPE #1802720
- Manufacturer: Monarch
- Model: T TYPE
Retrofitted in 2010 EQUIPPED WITH: New Electric PLC in 2010 60" Face Plate w/Jaws Transformer 4-Way Tool Post Coolant
Toledo, OH - Trusted Seller
1956 MONARCH 27" x 144"
- Manufacturer: Monarch
- Spindle bore: 57.15 mm
SPINDLE SPEEDS 14 to 600 RPM SPINDLE BORE 2 1/4" MAIN MOTOR 25 HP 27" Swing x 144" center distance 18" CHUSHMAN 3 JAW CHUCK D1-8 MOUNT " SWING OVER CROSSLIDE 7" SQUARE4 WAY MC CROSKY TOOLPOST COOLANT THREAD DIAL...
Cleveland, OH - Trusted Seller
1950 MONARCH 49"SWING X 84" CC
- Manufacturer: Monarch
12 SPINDLE SPEEDS 8 to 405 RPM THREAD CHANGES (48) 1/2 to 28 TPI 32" 4 Jaw Chuck Sony Digital Readout on Carriage Travel D1-11 Camlock Spindle 30 HP 220/440 Main Motor 48 Feeds .006 - .363 Thread Dial 32" Wide Be...
Cleveland, OH - Trusted Seller
1957 MONARCH Series 60
- Manufacturer: Monarch
- Model: SERIES 60
ONE USED - 22” x 96”cc MONARCH Engine Lathe 22” Swing Over Bedways 14” Swing Over Cross Slide Hardways Taper Turning Attachment Inch Threading 2 1/8” Spindle thru Hole Spindle Speeds from 9.5 to 800 RPM 18” Diam...
Aurora, IL - Trusted Seller
1959 MONARCH Series 80
- Manufacturer: Monarch
ONE USED - 27”x 24’cc MONARCH Engine Lathe 27” Swing Over Bedways 17” Swing Over Cross Slide Hardways Taper Turning Attachment Inch Threading 3” Spindle thru Hole Spindle Speeds from 4 Way Power Rapid Traverse 2...
Aurora, IL 
MONARCH 60
- Manufacturer: Monarch
- Model: 60
- Spindle bore: 38.1 mm
20.5" x 54" Monarch Model 60 Engine Lathe Model 60 20.5" Swing 54" Between Centers 10" 6 Jaw Chuck 1 5/8" Spindle Bore Quick Change Tool Post Steady Rest
- Trusted Seller
17"x60" Monarch Engine Lathe, 4-Jack Chuck, Tool Post, S/N 13562 ($10,500 OBO)
- Manufacturer: Monarch
“Used, very good condition; REFURBISHED 2025.” 17"x60" Table Size 4-jaw chuck Tool post S/N 13562 Swing: 17 inches over the bed Distance between centers: 60 inches Local deliveries available, simply message us be...
- Trusted Seller
Monarch 22M Geared Head Engine Lathe 22” Swing 48” Centers 10HP 3PH
- Manufacturer: Monarch
- Phase type: Three-phase
“IN GOOD CONDITION.” Monarch 22M Geared Head Engine Lathe 22” Swing 48” Centers 10HP 3PH Monarch 22M Geared Head Engine Lathe 22” Swing 48” Centers 10HP 3PH The Monarch 22M Lathe is a heavy-duty geared head engin...
1961 Monarch 18 X 30
- Manufacturer: Monarch
- Spindle bore: 38.1 mm
Engine Lathe Swing over ways: 18.5" | Swing over cross slide: 11" | Distance between centers: 30" | Spindle hole: 1.5" | Spindle speeds: 24 - 1,028 RPM | Threading range: 2 - 120 TPI
Town of Rockingham, VT
Tip: Enter manufacturer, model or keyword
