- Trusted SellerAuction
10" X 20" MONARCH TOOLROOM LATHE;S/N 44043, COLLET CHUCK, TAILSTOCK, 1-1/2" SPINDLE HOLE, SPINDLE
- Manufacturer: Monarch
10" X 20" MONARCH TOOLROOM LATHE;S/N 44043, COLLET CHUCK, TAILSTOCK, 1-1/2" SPINDLE HOLE, SPINDLE SPEED TO 4,000 RPM
Kokomo, INVisit Auction Website Monarch 18" lathe 18"BB 120"
- Manufacturer: Monarch
Nice lathe from local shop that closed down. Come check it out.
- Trusted Seller
MONARCH LATHE 18.5 X 102"
- Manufacturer: Monarch
MONARCH LATHE 18.5 X 102"WITH LOTS OF TOOLING CALL CALL FOR DETAILS AND MORE PHOTOS BEDWAYS ARE IN NEW CONDTIITON
- Trusted Seller
Monarch Lathe 18.5" swing by 102" between Centers w/ tooling Model 613
- Manufacturer: Monarch
Monarch Lathe 18.5" swing by 102" between Centers w/ tooling Model 613
- Trusted Seller
Monarch 20" x 96" Toolroom Lathe Series 60
- Manufacturer: Monarch
- Model: SERIES 60
Equipped with: 3 jaw chuck w/reversible jaws 4 way tool post Large capacity roller type steady rest Newall 2 axis DRO *Feeds are in millimeters* **Machine is USA built but shipped to Germany**
TRP-434 HEAVY DUTY UNIVERSAL PARALLEL LATHE, 32" X 72" MONARCH BRAND
- Manufacturer: Monarch
MONARCH (USA) Dyna-Shift Series 80 heavy duty universal parallel lathe, 32 "x 72", 20 "/ carriage, 36 Speed (8 - 1000 RPM), 3 1/2" spindle, Std threads, 30 motor HP, s / n. 45024-AT
Guadalupe, Mexico- Trusted Seller
- Trusted Seller
MONARCH 62 #0628822
- Manufacturer: Monarch
- Model: 62
- Spindle bore: 50.8 millimeter
3 Swing over ways: 18" | Swing over carriage: 12" | Distance between centers: 60" | Spindle speeds: 14 TO 1750 RPM | Spindle hole: 2" | Threads: 2 TO 120 TPI | Feeds: .0011 TO .0683 | Jaw chuck: 12" | Steady rest...
Toledo, OH - Trusted Seller
MONARCH T TYPE #1802720
- Manufacturer: Monarch
- Model: T TYPE
Retrofitted in 2010 EQUIPPED WITH: New Electric PLC in 2010 60" Face Plate w/Jaws Transformer 4-Way Tool Post Coolant
Toledo, OH - Trusted Seller
1956 MONARCH 27" x 144"
- Manufacturer: Monarch
- Spindle bore: 57.15 millimeter
SPINDLE SPEEDS 14 to 600 RPM SPINDLE BORE 2 1/4" MAIN MOTOR 25 HP 27" Swing x 144" center distance 18" CHUSHMAN 3 JAW CHUCK D1-8 MOUNT " SWING OVER CROSSLIDE 7" SQUARE4 WAY MC CROSKY TOOLPOST COOLANT THREAD DIAL...
Cleveland, OH - Trusted Seller
1950 MONARCH 49"SWING X 84" CC
- Manufacturer: Monarch
12 SPINDLE SPEEDS 8 to 405 RPM THREAD CHANGES (48) 1/2 to 28 TPI 32" 4 Jaw Chuck Sony Digital Readout on Carriage Travel D1-11 Camlock Spindle 30 HP 220/440 Main Motor 48 Feeds .006 - .363 Thread Dial 32" Wide Be...
Cleveland, OH - Trusted Seller
1957 MONARCH Series 60
- Manufacturer: Monarch
- Model: SERIES 60
ONE USED - 22” x 96”cc MONARCH Engine Lathe 22” Swing Over Bedways 14” Swing Over Cross Slide Hardways Taper Turning Attachment Inch Threading 2 1/8” Spindle thru Hole Spindle Speeds from 9.5 to 800 RPM 18” Diam...
Aurora, IL - Trusted Seller
1959 MONARCH Series 80
- Manufacturer: Monarch
ONE USED - 27”x 24’cc MONARCH Engine Lathe 27” Swing Over Bedways 17” Swing Over Cross Slide Hardways Taper Turning Attachment Inch Threading 3” Spindle thru Hole Spindle Speeds from 4 Way Power Rapid Traverse 2...
Aurora, IL 
MONARCH 60
- Manufacturer: Monarch
- Model: 60
- Spindle bore: 38.099999999999994 millimeter
20.5" x 54" Monarch Model 60 Engine Lathe Model 60 20.5" Swing 54" Between Centers 10" 6 Jaw Chuck 1 5/8" Spindle Bore Quick Change Tool Post Steady Rest
- Trusted Seller
17"x60" Monarch Engine Lathe, 4-Jack Chuck, Tool Post, S/N 13562 ($10,500 OBO)
- Manufacturer: Monarch
“Used, very good condition; REFURBISHED 2025.” 17"x60" Table Size 4-jaw chuck Tool post S/N 13562 Swing: 17 inches over the bed Distance between centers: 60 inches Local deliveries available, simply message us be...
Tip: Enter manufacturer, model or keyword
