Used Foundry & Casting in Kansas, USA

Kohler 60 x 32 Cast Iron Alcove Bath, Right Drain - Retail: $1200

• Manufacturer: Kohler

Kohler 60 x 32 Cast Iron Alcove Bath, Right Drain Open Box

CAST IRON 5-1/2" NO SWIVEL BASE VISE

“OLD STOCK , CLAMP BROKEN SEE PICTURES FOR DETAILS” CAST IRON 5-1/2" NO SWIVEL BASE VISE LENGTH - 7-1/2" WIDTH - 5-1/4" HEIGHT - 4-1/2" JAW CAPACITY OPEN- 5-1/2" MATERIAL - CAST IRON READ BEFORE BIDDING, MAKING A...

SURESEAL 5" BUTTERFLY VALVE 5-500-169 CAST IRON

• Manufacturer: SEALSURE

“MAY HAVE SOME SHELF WEAR” SURE SEAL 5" BUTTERFLY VALVE P/N: 5-500-169 DISC: NODULAR IRON SEAL: EPDM FDA BODY: CAST IRON OAD: 11" X 10-3/4" X 5" 17 LBS SC/12/WB D9/(1)AS

NIBCO 3" IBBM GATE VALVE F-617-0 CAST IRON

• Manufacturer: Nibco

“OLD STOCK” NIBCO 3" IBBM GATE VALVE, F-617-0 CAST IRON BRAND: NIBCO MPN: F-617-0 TYPE: GATE VALVE FLANGE FACE DIA: 6" FLANGE DIA: 3" SWP: 125 PSI WOG: 200 PSI MATERIAL: CAST IRON OAD: 20" X 8" X 8" WEIGHT: 67LBS...

SHENZHEN WELDING VACUUM CENTRIFUGAL DIE CASTING MACHINE ELXJ-101

• Manufacturer: SHENZHEN WEILONG

“OLD STOCKS , MAY HAVE SHELF-WEAR.” SHENZHEN WEILONG CENTRIFUGAL DIE CASTING MACHINE MODEL NO. ELXJ-101 POWER SOURCE - 220V/380V/AC , 50HZ POWER (W) - 1.5KW 2XZ-0.5 ROTARY VANE PUMP MACHINE NO. 613 PUMPING SPEED ...

UNBRANDED SWIVEL BASE CAST IRON 9" OAL 12-1/4" X 11

• Manufacturer: Sin Marca

“OLD STOCK” UNBRANDED SWIVEL BASE CAST IRON 9" OAL 12-1/4" X 11 APPROX. WEIGHT: 18 LBS. OAD: 12-1/4" X 11" X 2-1/2" KS/#633/WM /(1)E

INDUSTRIAL OIL PUMP HOUSING ASSEMBLY - CAST IRON - THREAD INLET - GEAR DRIVE

“HS” D/D 1873-2 INDUSTRIAL OIL PUMP HOUSING ASSEMBLY CAST IRON THREAD INLET GEAR DRIVE OIL PUMP HOUSING ASSEMBLY CAST IRON CONSTRUCTION THREADED INLET PORT INTERNAL GEAR DRIVE DESIGN 2-BOLT MOUNTING BASE CONDITIO...

UNBRANDED SWIVEL BASE CAST IRON 9" OAL 12-1/4" X 11

• Manufacturer: Sin Marca

“OLD STOCK” UNBRANDED SWIVEL BASE CAST IRON 9" OAL 12-1/4" X 11 APPROX. WEIGHT: 18 LBS. OAD: 12-1/4" X 11" X 2-1/2" KS/#634/WM/(1)E

NO BRAND COLLAR ASSEMBLY, 8" OD, 5 3/4" ID, 1" THICK, CAST IRON

• Manufacturer: NO BRAND

NO BRAND COLLAR ASSEMBLY, 8" OD, 5 3/4" ID, 1" THICK, CAST IRON NO BRANDCOLLAR ASSEMBLYCAST IRONAPPROX:8" OD5 3/4" ID1" THICK PLEASE READ BEFORE BIDDING, MAKING AN OFFER, OR PURCHASING Please DO NOT PAY until...

MAUREY CAST IRON BUSHING BORE TIMING PULLEY 60 TEETH 60H150-SF

• Manufacturer: MAUREY

“MAY HAVE SOME SHELF-WEAR” MAUREY TIMING PULLEY BUSHING BORE MATERIAL: CAST IRON NUMBER OF TEETH: 60 BUSHING SERIES: SF BELT TYPE: H BORE DIAMETER: 3-1/8 INCHES HEIGHT: 1-3/4 INCHES WIDTH: 9-1/2 INCHES PITCH: 1/4...

FYH INSERT BEARING UNIT PH210 CAST IRON J7 FIT

“OLD STOCK , MAY HAVE SHELF-WEAR.” FYH INSERT BEARING UNIT PART NO. PH210 BEARING UNIT TYPE - PILLOW FIT - J7 BORE DIAMETER - 2" HOLE DIAMETER - 7/8" WEIGHT - 3LBS AJ/#160/SDR D-F3/(1)/SO

MORRIS PUMP CASING 1116200BF CAST IRON 3" THREADED BORE 12-3/4" LENGTH

• Manufacturer: Morris

“OLD STOCK, SURFACE RUST” MORRIS PUMP CASING 1116200BF CAST IRON BORE: 3" THREADED LENGTH: 12-3/4" WIDTH: 9-3/8" RECESSED DIAMETER: 6" (2) - 3/8" THREADED BOLT HOLES (4) - 3/4" BOLT HOLES (8) - 1/2" BOLT HOLES 23...

MASONELIAN MODEL 17-1 3/4" CAST IRON PRESSURE REDUCING REGULATOR 805017-101-012

• Manufacturer: Masoneilan

“MAY SHOW SIGNS OF SHELF WEAR.” MASONEILAN PRESSURE REDUCING REGULATOR PART NO. 805017-101-012 MODEL NO. 17-1 SIZE: 3/4" FEMALE THREADED THREAD CT. 13G MAT'L: 3L 2-12 PSI MAX INLET 400 PSI CAST IRON STEEL RED OAD...

UNBRANDED HOPPER LENGTH 39-7/8" WIDTH 39-7/8" HEIGHT 66" CAST IRON

“OLD STOCK” UNBRANDED HOPPER LENGTH 39-7/8" WIDTH 39-7/8" HEIGHT 66" BODY CAST IRON 1200 GALLON TOP HOLE CONNECTOR ID 3" SIDE HOLE CONNECTOR ID 3-1/2" BOTTOM HOLE CONNECTOR ID12" BRAY CONTOLS PART NO 92-1600-1130...

CALYPSO WATERJET CARTRIDGE FILTER HOUSING UNIT CAST IRON 11-1/4" X 34"

• Manufacturer: Calypso

CALYPSO WATERJET CARTRIDGE FILTER HOUSING LENGTH - 11-1/4" WIDTH - 10" HEIGHT - 34" DIAMETER - 9" EYEBOLT HOLE SIZE - 1-3/8" MATERIAL - CAST IRON 82 LB, 15 X 13 X 39" AJ-#26043-SURPLUS-(1)-E