- Trusted Seller
Plastic Process Equipment FX-100460
used
- Manufacturer: Plastic Process Equipment
Machine type: Process Equipment | Machine location: Utah | Stock #: 566483 | – air flow: 100 CMH | – dewpoint: -40C | – drying blower: 0.75kW | – drying heater: 6kW | – regen. blower: 0.18kW | – regen. heater: 4...
- Trusted Seller
Plastic Process Equipment MFT0754C
used
- Manufacturer: Plastic Process Equipment
Machine type: Process Equipment | Machine location: Utah | Stock #: 742211 | – power: 230V/3 Phase/ 60hZ/ 23.7 Amps
$2,990 USDChicago, IL - Trusted Seller
2002 Advanced Process Equipment Car Bottom Oven
used
- Manufacturer: Advanced Process Equipment
Car- 22.5’L x 6’W Total- 27.9’L x 10’7″W 750° Machine type: Ovens | Machine location: Upon Request | Stock #: 029707
- Trusted Seller
2022 Taesungind TSI
used
- Manufacturer: Taesungind
High-capacity primary mixer (2,300L) with powerful 132kW planetary drive Large-scale DIW storage (5,000L) with integrated cleaning system Full CMC processing line with 2,300L mixing capacity Integrated slurry sto...
$3,520,000 USDChicago, IL - Trusted Seller
2022 Yunsung F&C
used
- Manufacturer: Yunsung
Premium 2,300L mixing line with 110kW planetary drive (1,500 RPM) Temperature-controlled process (34-60°C) PVDF mixer with 22kW dispersion Carbon/SP mixer with precision control NMP solvent system with 5,000L pri...
$6,344,000 USDChicago, IL - Trusted Seller
2022 Weighpack Primo Linear C-10
used
- Manufacturer: Weighpack
Used (2) Weighpack Primolinear C-10 Two-Lane Linear Net Weighers with (2) Incline Infeed Conveyors and Floor Stands: This system was previously used for filling cups and clamshells of fruits and other produce. It...
- Trusted Seller
Roto-Finish MP-120-6-5
used
- Manufacturer: Hammond/Roto-Finish
Machine type: Process Equipment | Machine location: Pennsylvania | Stock #: 090426 | -bowl diameter: 120″ | -channel width: 6″ | -revolutions per cycle: 5 | -processing time: 12-25 min | -motor: 20 HP | -weight:...
- Trusted Seller
1995 Anguil SCFM
used
- Manufacturer: Anguil
This skid-mounted catalytic oxidizer is designed to handle up to 1,500 SCFM of standard emissions as well as chlorinated compounds. Rebuilt in 2017 with updated controls and new catalyst in 2021, this system has...
- Trusted Seller
2016 Westinghouse V48 M28T 75G
used
- Manufacturer: Teco - Westinghouse
– 75 KVA – 480 Delta – 3 Phase – 60 Hertz year approx
$3,990 USDChicago, IL - Trusted Seller
2021 Matrix MX370P
used
- Manufacturer: Matrix
Speed 10 m/min (33 ft/min) Film Width 340 mm (13″) Sheet Width 420 mm (17″) Paper Weight ≥ 135 gsm Temperature 0–140 °C Control Multilingual LCD, semi-auto feed, auto separator Power 220–240 V, ~13 A, 2.2 kW Size...
- Trusted Seller
2020 Turfco Torrent 2
used
- Manufacturer: Turfco
Model Torrent 2 Debris Blower (#85651) Width Outside of tire to outside of tire – 48” (1.22 m) Height Nozzle pointed up – 40.5” (1.03 m), To top of engine – 36” (0.92 m) Length Hitch to end of chute – 108.8” (2.7...
- Trusted Seller
2014 Spider SC1500;SR;50Hz
used
- Manufacturer: Spider
14 x 12 x 24 in Machine type: Other Process | Machine location: Washington | Stock #: 438670 | Rated for: 1500 lbs. | Weight: 105 lbs
- Trusted Seller
2019 Hennecke MicroLine 45 R/MT
used
- Manufacturer: Micro Line
1 metering unit for Polyol with an HP 2 metering pump, max. nominal output approx. 54 cm3 /sec at 2.6 kW/1800 min-1 1 metering unit for Isocyanate with an HP 2 metering pump, max. nominal output approx. 54 cm3 /s...
- Trusted Seller
Water Maze HBG-30D
used
- Manufacturer: Water Maze
Foam lance holder set Water Maze Power supply (Ph/V/Hz) 1 / 120 / 60 Amps (A) 3 Flow Rate (gal/h) max. 24 BTU 311000 Container capacity (gal) 100 Exhaust Stack diameter (in) 10 Weight without accessories (lb) 13...
- Trusted Seller
Kirby RMT D
used
- Manufacturer: Kirby
1800-2200 Stalks Per Minute Working width 3,85 m Conveyance width 2,50 m Total weight 850 kg PTO speed 540 rpm Needed power 50-60 hp Cutting height 3-6 cm Drive Hydraulic **Never Used**
Gardner Denver ES20 Industrial Compressor
used
- Manufacturer: Gardner Denver
- Model: ES20
Good condition Gardner Denver ES20 Industrial Compressors. Located in USA and other countries. Click request price for more information.
USA
Tip: Enter manufacturer, model or keyword
