search

  • Mori Seiki SH-630 Horizontal Machining Center (HMC) - USED Mori Seiki SH630

    $31,900 - Sanford, FL
    • Manufacturer: Mori seiki

    1999 mori seiki sh630 horizontal machining center - used general specifications: x-axis travel 33.1" y-axis travel 22.9" z-axis travel 33.1" spindle speeds 10,000 rpm taper size 50 60 atc cnc contr...

  • 1995 MORI SEIKI SH-50

    $8,500 - Santa Ana, CA Recently Added
    • Manufacturer: Mori seiki
    • Model: SH-50
    • Control: CNC (CNC (MSC-516/MORI 16M))

    chip conveyor chip blaster coolant system d30 x: 24.8 inch | y: 23.6 inch | z: 25.6 inch | atc: 42 | mfg: mori seiki | mpn: sh-50 | power: 30 hp | taper: cat-40 | region: south | control: cnc (cnc...

  • 1985 MORI SEIKI MV-55

    $19,500 - Santa Ana, CA
    • Manufacturer: Mori seiki
    • Control: CNC (FANUC 11M)

    included 16" 4th axis table, yasnac mx-1 x: 40 inch | y: 21.7 inch | z: 21.7 inch | atc: 24 | mfg: mori seiki | mpn: mv-55 | rpm: 3500 rpm | axis: 4 | power: 15 hp | taper: cat-50 | width: 142 inch...

  • 2006 MORI SEIKI DURAVERTICAL 5100

    $80,250 - Santa Ana, CA
    • Manufacturer: Mori seiki
    • Control: CNC (MSC-504 III)

    equipped with: full 4th axis ddrt 260 rotary table spindle cooling system coolant system complete covers safety door interlock system 320m part program storage synchronized tapping too...

  • 2008 MORI SEIKI DURAVERTICAL 5100

    $74,900 - Santa Ana, CA
    • Manufacturer: Mori seiki
    • Control: CNC (MSC-504 III)

    reinishaw mp40 tool probe, thru spindle coolant, rigid tapping, 4th axis ready, lift-up chip conveyor, excellent condition, low hours, all manuals

  • 1998 MORI SEIKI SH-400

    $29,500 - Santa Ana, CA Recently Added
    • Manufacturer: Mori seiki
    • Control: CNC (MSC-518)

    x: 22 inch | y: 20 inch | z: 20 inch | atc: 120 | mfg: mori seiki | mpn: sh-400 | rpm: 12000 rpm | axis: 4 | power: 39 hp | taper: 40 | region: west | control: cnc (msc-518) | palletl: 15.75 inch ...

  • 1992 MORI SEIKI MV-65B

    $25,000 - Santa Ana, CA Recently Added
    • Manufacturer: Mori seiki
    • Control: CNC (Fanuc 10M)

    x: 60 inch | y: 25 inch | z: 25 inch | atc: 30 | mfg: mori seiki | mpn: mv-65b | rpm: 4000 rpm | axis: 3 | taper: bt-50 | region: west | tablel: 26 inch | tablew: 79 inch | control: cnc (fanuc 10m...

  • 2005 MORI SEIKI NH4000 DCG

    $95,000 - Santa Ana, CA Recently Added
    • Manufacturer: Mori seiki
    • Control: CNC (FANUC MSX-501 III)

    equipped with: direct center of gravity (dcg) mori seiki msx-501 control thru-spindle coolant (1,000 psi) chipblaster high-pressure coolant unit marposs t36 system with e-85 receiver 14,000 rpm sp...

  • 1992 MORI SEIKI MV-40B

    $15,900 - Santa Ana, CA Recently Added
    • Manufacturer: Mori seiki
    • Model: MV-40B
    • Control: CNC

    equipped with tool holders and expandable memory x: 31.5 inch | y: 16.14 inch | z: 20 inch | atc: 20 | mfg: mori seiki | mpn: mv-40b | rpm: 8000 rpm | axis: 3 | power: 10 hp | taper: bt-40 | region...

  • 2000 MORI SEIKI MH-1000

    $125,000 - Santa Ana, CA
    • Manufacturer: Mori seiki
    • Model: MH-1000
    • Control: CNC (Mori Seiki MSC-502)

    equipped with fanuc 16m cnc controls 6,600 table load capacity helical interpolation external chip conveyor coolant thru spindle hydraulics pallet clamping synchronous tapping function full...