Used Saws in Ohio, USA

1926 TANNEWITZ GH #0904024

• Manufacturer: TANNEWITZ

2012 KBC MACHINERY BAV-700PF VERTICAL BANDSAW W/ POWERFEED. #0679824

N1270291 APPROX. WEIGHT 2,000 LBS Blade size: 161" X 1/8" - 1" | Speed: 65 - 1292 FMP | Cutting cap(h): 12-5/8" | Cutting cap(w): 28" | Motor: 2HP | Table feed rate: 0-5 FPM | Table stroke: 12-1/2"

KASTO SSB260VA #1061923

• Manufacturer: Kasto
• Model: SSB260VA

Equipped with: Overhead bundling clamp Preset piece counter Automatic barfeed with 9x multi-index Hardened serrated jaws Chip conveyor Cut length set by hand wheel with mechanical readout Flood coolant Hydraulic ...

GROB NS-24 #0743122

• Manufacturer: Grob
• Model: NS-24

28" x 24" Tilt Table Throat depth: 24" | Table size: 28" X 24" TILITNG | Blade welder: YES | Weight: 1200 LBS | Dimensions: 56"L X 38"W X 84"T

COSEN SH-500M SEMI AUTOMATIC SWIVEL HEAD

• Manufacturer: Cosen
• Model: SH-500M

Swivel saw head allows miter cutting from 0° to 60° Hydraulic cylinder plus precision ground hinge support Hardened worm gear for durability Hard stops at 0°, 45°, and 60° for quick angle set-up Capacity: 0°:Roun...

DOALL 16-M

• Manufacturer: DoAll
• Model: 16-M

10" HEIGHT X 16" THROAT 24" X 24" TILTING TABLE VARIABLE SPEED 50 TO 5200 FPM WITH HIGH/LOW SHIFTER WIRED 220/3/60

MARVEL 8 MARK 2 II

• Manufacturer: Marvel
• Model: 8 Mark II

MARVEL 8 MARK II Vertical Bandsaw available. Used condition, 1" blade width, 174" blade length, speed range of 50 to 450 FPM. Ideal for precision cutting tasks. 18" X 22" MARVEL #8 MARK II VERTICAL BANDSAW

MILFORD 10" x 16" Rectangles, 10" Rounds

• Manufacturer: MILFORD

USED MILFORD AUTOMATIC HORIZONTAL BANDSAW Manufacturer: Cutting Capacity 10" x 16" Rectangles, 10" Rounds Band Speed Variable Blade Tension Feed Control Blade Wheels cast iron Coolant System Re-Circu...

WELLSAW 1338-SA

• Manufacturer: Wellsaw
• Model: 1338-SA

Rect-cap (h): 13.0 in | Rect-cap (w): 38.0 in | Rounds-cap: 13.0 in | Type (auto, manual, semi): Semi | Blade width: 1.0 in | Blade thickness: 0.035 in | Blade length: 186.0 in

WELLSAW 1316S

• Manufacturer: Wellsaw
• Model: 1316S

See attached pdf for detailed BROCHURE and SPECIFICATIONS

WELLSAW 1316S-SA

• Manufacturer: Wellsaw
• Model: 1316S-SA

See attached pdf for detailed BROCHURE and SPECIFICATIONS

ROLL-IN JE1320

• Manufacturer: Roll-In
• Model: JE1320

See attached pdf for detailed BROCHURE and SPECIFICATIONS

WELLSAW WELLSAW 600

• Manufacturer: Wellsaw

*SPECIFICATIONS WERE TAKEN FROM MANUFACTURERS INFORMATION AND SHOULD BE VERIFIED. Rectangular 6" High x 13" Wide Rounds 6-1/2" Diameter or 6" Pipe 45° Angle 6-1/2" Wide x 6" High Blade Speed FPM 50, 90, 160, 250...

GROB 2S36U

• Manufacturer: Grob
• Model: 2S36U

36" THROAT 1" BLADE BUT SHOWS UP TO 1 1/2" BLADE 20" HEIGHT 36" X 36" TILTING TABLE 3 SPEED GEAR BOX WITH VARIABLE DRIVE UP TO 15,000 FPM 10 H.P. 208/220/440 VOLT VARIABLE SPEED MOTOR BLADE WELDER

WELLSAW WELLSAW #8-M

• Manufacturer: Wellsaw

10" x 16" Max Capacity Rectangular (HxW) Max Capacity Round 10" Blade Size (LxWxT) 3/4" x 11’6" x .035" Blade Motor 1/2 H.P. Single phase 110 / 220v Work Height 26" Weight 850 lbs Floor Space (LxWxH) 82" x 43" ...