Used Processing in Bavaria, Germany

2014 Combined Extrusion Thermoforming Line Cannon/Breyer

Item Description/Artikelbeschreibung: Lot consists of: (1) Combined Extrusion Thermoforming LineDeutsch: Cannon/Breyer Combined extrusion thermoforming line for producing of continous 6-layer PE plate to thermofo...

Roller

• Manufacturer: Roller

Compact room cooler with one fan. Nominal capacity appr.: 0.2 to 2.0 kW (depending on process and environmental conditions) | Air volume: 470 m3/h | Temperature range: 40 °C | Operating pressure: 25 bar | Power: ...

Water tanks

• Manufacturer: Jacob Carl

Water tanks for a 100 hl brewhouse. Manufacturer: Jacob Carl Year of construction: 1992 Consisting of: 1 brewing water tank: D= approx. 2500 mm, capacity approx. 16.5 m³ with insulation and cladding 1 service w...

Pipe panel

• Manufacturer: vbw-weihenstephan

Additional title: material diversion

ARBURG - Allrounder 370 C 1000-250 - 1994 - Injection molding machine

• Manufacturer: Arburg
• Model: Allrounder 370

Clamping unit: Clamping force maximum 1,000 KN Tool securing force / dto. increases maximum 50 / 500 KN Opening force / dto. increases maximum 35 / 250 KN Opening travel maximum 500 mm Tool height minimum 250 mm ...

NETSTAL ELION 800 - 130 Injection Molding Machine Netstal Elion 800 - 130

• Manufacturer: Netstal

Clamping force: 800 kN (approx. 80 tons) Screw diameter: 45mm Ejection force: 210 kN Discharge stroke: 129 mm Opening force: 800 kN Opening stroke: 0-350mm Mold installation height (tool height): 200 - 500 mm Pow...

Arburg - Allrounder 370 C 1000-250 - 1994 - Injection molding machine

• Manufacturer: Arburg
• Model: Allrounder 370

Clamping unit: Clamping force maximum 1,000 KN Tool securing force / dto. increases maximum 50 / 500 KN Opening force / dto. increases maximum 35 / 250 KN Opening travel maximum 500 mm Tool height minimum 250 mm ...

DEMAG - Ergotech-compact 1000 - 430 - 1997 - Injection molding machine

• Manufacturer: Demag
• Model: Ergotech

Clamping force: 100 T Screw diameter: 40 mm Tie bar spacing

DEMAG - Ergotech system 600/370-120 - 2000 - Injection molding machine

• Manufacturer: Demag
• Model: Ergotech

Pressing force: 120 tons. Oil volume flow (Q max): 130l/min Hydraulic pressure (P max): 210 bar Power supply: 400 V

Nordfab AS Fans

Nordfab AS blower, dimensions: 800 mm x 800 mm x 1100 mm.

Spänex Fans

Spänex blower, type: Sp. 20, fabrication number: 20, 4050 m³/h, dimensions: 650 mm x 650 mm x 800 mm.

2009 Hunkeler 1100 #PP151

• Manufacturer: Hunkeler

Hunkeler Belt Conveyor 1100 V 148409 Belt width: 500mm

NN vibrating sieve Sieves

Vibrating sieve with 2 Stiletto electromagnetic vibrating motors, gutter width: 440 mm, diameter perforations: 10 mm, 5 mm and 1 mm, total dimensions: 2600 mm x 500 mm x 1000 mm.

NN blower Fans

Blower, dimensions: 900 mm x 650 mm x 830 mm.

Tunnel cooler

Spraying the full product with cold water to cool it down to approx. 40 °C. Allows clean labelling and creates a vacuum in the bottle. With cooling tower for recooling the spray water from the tunnel cooler with ...