Used Processing in Illinois, USA

Ross Mill Colloid HSM-410

• Manufacturer: Ross
• Model: HSM-410

Ross, model HSM-410, 304 stainless steel, inline, high shear mixer. Rated up to 240 GPM. Rates dependant on materials, application and machine configuration. Equipped with 2" Tri-clamp infeed, 2" Tri-clamp discha...

Ross Mill Colloid ME-401

• Manufacturer: Ross
• Model: ME-401

Ross, model ME-40, 316 stainless steel, inline, high shear mixer. Equipped with 2½" ID stator, 1½" Tri-clamp infeed, 1" ID / 2" OD Tri-clamp discharge and powered by a 1½ hp drive. Rates dependant on materials, a...

Feeder Auger 10 CU FT

10 cu ft, S/S, pre feeder with product trough, and dual feed screws. Has 4 1/2" flanged end bottom discharge with a 14" floor clearance, and a Reliance Electric 3/4 Hp AC motor drive, and mounted on (4) leg base ...

Gough Econ Feeder Auger 14" DIA

• Manufacturer: Gough Econ

Gough Econ, 335" long x 14" diameter, stainless steel, screw feeder. Equipped with 19" OD / 15" ID flanged top infeed, 5 hp drive, and (4) 19" x 19" flanged discharges.

Sidel Feeder Incline/Cleated GEBO AIDLIN

• Manufacturer: Sidel

Sidel, model Gebo Aidlin, automatic stainless steel water fall style cap elevator / feeder and sorter. Rated from 50 to 2000 caps per minute – depending on materials, application and machine configuration. Capa...

Fitzpatrick Mill Roller (Mill) 20"L X 9"D

• Manufacturer: Fitzpatrick

Fitzmill, Model 20, guiloriver, prebreaker with pounds of product per hour – depending on materials and application. Equipped with stainless steel contact parts and 21" x 40" product feed throat with 94" charge h...

Wexxar Sealer Case Taper 505/252TB

• Manufacturer: Wexxar

Wexxar / Belcor, Model 505 / 252, Uniform, semi automatic case erector with pack station, top and bottom case taper rated from 5 to 25 cases per minute – depending on materials, application and operator dexterity...

Wexxar Sealer Case Taper 505/252TB

• Manufacturer: Wexxar

Wexxar / Belcor, Model 505 / 252, Uniform, semi automatic case erector with pack station, top and bottom case taper rated from 5 to 25 cases per minute – depending on materials, application and operator dexterity...

Belcor Sealer Case Taper 505S/252TB

• Manufacturer: Belcor

Belcor, Model 505S / 252, Semi-automatic case erector packer and uniform, top and bottom case taper. Rated from 5 to 25 cases per minute – depending on materials, application and operator dexterity. Case size ra...

Meyer Inc Airlock KIP12

• Manufacturer: Meyer

Meyer, Model KIP, 316 stainless steel, rotary airlock. Equipped with a 15" long feed throat with bag clamp, 12" diameter inlet and outlet, 19" diameter flanges, (8) vanes and powered by a 1½ hp drive with an 83....

Meyer Inc Airlock KIP12

• Manufacturer: Meyer

Meyer, Model KIP, 316 stainless steel, rotary airlock. Equipped with a 15" long feed throat with bag clamp, 12" diameter inlet and outlet, 19" diameter flanges, (8) vanes and powered by a 1½ hp drive with an 83.7...

Fuji Formost Sealer Bag GTS-BLX-F2

• Manufacturer: Fuji

Fuji Foremost, Model GTSBLXF2, Automatic, stainless steel, horizontal, bagger. Rated from 20 to 90 bags per minute – depending on materials and application. 316 stainless steel shaft construction with 304 stainle...

MGS Feeder Coupon Inserter RPP420DCSU

• Manufacturer: MGS

MGS, Model RPP-420D-CSU, automatic, rotary feeder. Rated from 10 to 400 picks per minute – depending on materials, application and machine configuration. Product size: 1½" to 18" in Width; 1½" to 5" in Height. Eq...

Doboy (Syntegon) Sealer Bag Band CBSCH

• Manufacturer: Doboy

Doboy, Model CBS-CH, right to left, continuous motion, chain fed band sealer rated from 0 to 425" per minute with number of product – depending on materials, application and operator dexterity. Equipped with trim...

2015 10′ x 20′ RETRO Systems Hornet HHD120-MKPO #51540

• Manufacturer: RETRO SYSTEMS

New – 2015 Serial No. 2693 CATALOG SPECIFICATIONS: Mild Steel Cutting Capacity: Stainless Steel Cutting Capacity: Aluminum Cut Capacity: EQUIPPED WITH: Hypertherm Plasma Edge Connect CNC Control System on Remote ...