Used Saws

12" x 12" DoAll Model: #C-305A Horizontal Bandsaw

• Manufacturer: DoAll
• Model: C-305A

12" x 12" DoAll Model: #C-305A fully automatic horizontal bandsaw 144" x 1.25" blade, 30.5" passline, 450 FPM, Serial Number: 497-94279, 120" In/Out Feed Conveyor

Marvel Series Power Roll-in Vertical Band Saw, Model# 81A. With 18" Throat, 45 Degree Right and Left

• Manufacturer: Marvel
• Model: 81A

Marvel Series Power Roll-in Vertical Band Saw, Model# 81A. With 18" Throat, 45 Degree Right and Left Power-Tilt, and Pneumatic Clamp.

Northfield No. 4 – 16″ Table Saw

This is a fully functional Northfield No. 4 table saw. This saw has a 16″ blade capacity and with a Freud blade it looks to have slightly under 3-7/8″ of capacity. You will find a clean 52″ Biesemeyer fence. a 44...

Powermatic 66 Table Saw 10" Tilting Arbor 3Ph 5Hp 230/460V 52" Fence

• Manufacturer: Powermatic
• Model: 66

Used, in Good Working Condition, Tested. Has a Baldor 5 HP motor 230/460V 3Ph. Wired for 460V. No motor starter box. New spindle bearings. No cover for the lower unit. Fence is not mounted correctly for the tape ...

Victory 15″ Radial Arm Saw

This is a rather rare saw made by “Victory Motors Inc. during World War II based on a DeWalt design. With that said this is a pretty cool radial and a part of woodworking history. 5hp 230/460V/3-Phase. 1″ arbor ...

WF WELLSAW F1620A-CNC

• Manufacturer: Wellsaw

Rectangular at 90º 16″ High x 20″ Wide Round 16″ Diameter CNC Programmable Controller with Color Touch Screen Automatic Kerf Compensation Blade Break/Stall Switch Machine Wired for 460/60/3 Equipped with the fol...

Safety Speed Cut 7400 Panel Saw (5hp)

Not much to say about this Safety Speed Cut 7400 Panel Saw as it functions as it should. It does have a small parts shelf and 8′ fences on both sides. It’s also has the largest motor offered which is 5 hp. Full s...

FMB #9275 - FMB Band Saw #9275

• Manufacturer: FMB

FMB Triton 9 1/2″ Pull Down Horizontal Mitering Band Saw Inventory # 9275 Fully Serviced by our In-House Service Team Brand New True Direct Drive Motor/Gearbox Helical Gearbox with Gears in Carburized, Hardened A...

RazorGage RG3 Automatic Saw Measuring System

• Manufacturer: OMGAOMGAOMGAOMGAOMGARazorGageRazorGageRazorGageRazorGage

Get optimal cutting efficiency for your operation The RazorGage RG3 Automatic Saw Measuring System is an industry leading tool for cutting efficiency. This saw system can be used as a automatic pusher or an autom...

Durand Machine Works Vertical Band Saw, Serial# B233. With 21" Throat, and Approximate 23-1/2" x 21-

Durand Machine Works Vertical Band Saw, Serial# B233. With 21" Throat, and Approximate 23-1/2" x 21-1/2" Tilt Table.

Thomas 250 Manual Cold Cut Metal Saw 10" Circular Cutoff Miter 45° 480V 3Ph

• Manufacturer: Thomas
• Model: 250

Used, in Good Working Condition, Tested. Clamp and miter moves easy. 2 cutting speeds 1.5 / 2Hp Motor RPM 840/1680 460V only Takes up to a 10" blade Miters 45° Auto coolant cutting fluid pump If this item ships a...

Brown Master 10" Manual Cold Cut Miter Metal Saw 850/1700RPM 460V 3Ph

• Manufacturer: Brown Master

Used, in Good Working Condition. Tested. Looks like it was setup to run with an automation system. No handle no clamp for material. Motor is 460V only. Looks to be 2 speed. 850-1700 rpm. 10" blade. Almost looks l...