Used Processing in Illinois, USA

2024 McCloskey S1903DT #R412

• Manufacturer: Mccloskey

√ 6100mm x 1524mm (20’ x 5’)heavy duty high energy 2 bearing3 deck screen box. √ 98 kW (130Hp) engine √ Integrated hydraulic folding stockpiling conveyors √ Remote control tipping grid √ Fast on-site setup time –...

Komplet Kompatto 221 #R086

• Manufacturer: Komplet America

• High capacity up to 80 tph / 90 us tph(depending on feed size, mesh & material type) • Direct feed onto pan area • Choice of screen meshes/punch/arpa/anticlogging • Quick set up • Remote control • Hydraulically...

NOVATEC 2 CUBIC FOOT VACUUM 18735

• Manufacturer: Novatec

Novatec model 04338-20 vacuum receiver. S/N 12-784. Manufactured 11/99. Approximate 2 cubic foot capacity. 16″ OD x 22″ chamber plus bottom taper. Includes flapper valve. 2″ OD line size.

SMOOT 9″ ROTARY AIRLOCK 19010

Smoot 9″ rotary airlock. S/N 10292. 9″ x 9″ throat opening with 11″ x 11″ bolt flange. Powered by a 3/4 HP 208-230/460-volt motor thru a gearbox. Has 5″ OD blow-thru mounted on under-side discharge.2 Available

PRODUCT DESIGN & DEVELOPMENT 2 18703

One (1) used Product Design and Development two lane profile notcher. Air actuated. 5″ x 2 ¼” cylinder. Two post design. Stand mounted.

TECHNO-PLAST PULLER / TRAVELING SAW 18683

• Manufacturer: Techno-Plast

Used Techno-Plast model TRZ-240SA/300 Puller/Traveling Saw Combination. S/N 7010750. 9 1/4″ wide cleats with 96″ belt contact length. Chain driven with dual pneumatic gap adjustment. Air traveling with nominal 14...

GREINER 80/9 PULLER / SAW 18515

• Manufacturer: Greiner

Used Greiner model 80/9 Puller / Traveling Saw Combination. S/N R9804350. Utilizes nominal 9 1/4″ wide cleats with 108″ belt contact length. Chain driven with dual pneumatic gap adjustment. Air traveling saw with...

GOODMAN CUTTER / PULLER 18397

One (1) used Goodman puller / cutter combination. S/N 6498. Nip roll puller has 3.5″ wide x 4″ diameter rolls. Puller driven by approximately a 3 HP A/C motor. On demand cutter can handle up to a 3″ OD bushing. C...

PAIR MEYER 5.5″ ID AIRLOCKS 18432

• Manufacturer: Meyer

Pair of incomplete William J. Meyer HDX series 5.5″ airlocks. S/N 291105-010B and 292545-010A. Both have 11″ OD bolt flange mount with 5.5″ OD airlock inlet and outlet. Cast iron airlock housing with replaceable ...

CDS CBH36-6 6″ X 36″ 18259

• Manufacturer: CDS

CDS model CBH 36-6 belt puller. S/N 230202. Has nominal 6″ wide belts with 36″ of belt contact length. Set up for right to left operation. Top and bottom belt manually height adjustable via hand wheel. Belts are ...

LORENZ 6″ OD DIVERTER 18210

• Manufacturer: Lorenz

Lorenz model DV2-600-11AL-ST-C 6″ OD diverter. S/N 35588-01. Has 6″ OK160 pipe adapters that can be removed to go back to 6″ OD flange less pipe. Aluminum construction

COPERION SMALL MATERIAL HOPPER 16768

• Manufacturer: Coperion Waeschle

Coperion Capital small material hopper CS series 36″ diameter barrel, 10″ straight side, 25″ long, 60-degree cone with 10″ top opening, 7-3/4″ ID outlet with 10.5″ OD bolt flange, Unit has four (4) stand mounts a...

LARGE FOREMOST VACUUM RECEIVER 18220

One (1) used Foremost vacuum receiver. With lid and flapper. Aluminum construction. 2.5″ OD inlet. 6.5 OD outlet

BERINGER 2 HP HYDRAULIC POWER 16824

• Manufacturer: Beringer

Beringer model HPNVL 2HP hydraulic power pack, S/N 4SL704-3. 2HP 230/460V motor with pump which are not mounted to the tank. Includes controls.

GAMMA FLUX 9 ZONE TEMPERATURE 16294

• Manufacturer: Gammaflux

Gamma Flux 9 zone hot runner controller, 240-Volts.

Eastey EB25A Packaging Machinery

• Manufacturer: Eastey
• Model: EB25A

Good condition Eastey EB25A Packaging Machinery. Located in USA and other countries. Click request price for more information.