- Trusted Seller
7-1/2" X 37" X 10" SET-UP-BLOCK w/(6) T-SLOTS
used
7-1/2" X 37" X 10" SET-UP-BLOCK EQUIPPED WITH: (6) T-SLOTS GENERAL SPECIFICATIONS Block Width 7-1/2" Block Height 37" Block Depth 10" SEE STOCK NUMBERS 26784 AND 26785 ALSO.
$550 USDCincinnati, OH - Trusted Seller
7-1/2" X 37" X 10" SET-UP-BLOCK w/(6) T-SLOTS
used
7-1/2" X 37" X 10" SET-UP-BLOCK EQUIPPED WITH: (6) T-SLOTS GENERAL SPECIFICATIONS Block Width 7-1/2" Block Height 37" Block Depth 10" SEE STOCK NUMBERS 26783 AND 26784 ALSO.
$550 USDCincinnati, OH - Trusted Seller
2012 2.56" X 60" MTA INTERNATIONAL "V65LE" SERV0-FEED AUTOMATIC BAR-FEED w/INCLINED LOAD FEEDER - HAND HELD PLC CONTROL -
used
- Manufacturer: MTA
- Capacity: 0.203"
- Weight: 772 LB
#V65LE MTA INTERNATIONAL AUTOMATIC BAR-FEED NEW 2012, SERIAL NO 16120339, MODEL V65LE EQUIPPED WITH: HAND HELD CONTROL PLC CONTROL SERVO-FEEDING INCLINED LOADER FEED TABLE CATALOG SPECIFICATIONS: Round Bar Stock ...
$4,450 USDCincinnati, OH - Trusted Seller
1941 10" KEARNEY & TRECKER DIVIDING HEAD
used
- Manufacturer: Kearney & Trecker
10" KEARNEY & TRECKER DIVIDING HEAD SERIAL NO. 3/3254, NEW 1941, MODEL K
$600 USDCincinnati, OH - Trusted Seller
2010 300 TON ENERPAC "ZE6440SJ-H & RR30024" DOUBLE-ACTING HYDRAULIC SYSTEM w/ZE6440SJ-H ENERPAC PUMP - RR30024 ENERPAC CYLINDER - CONTROLS & GAUGING
used
- Manufacturer: Enerpac
300 TON ENERPAC DOUBLE-ACTING HYDRAULIC SYSTEM w/PUMP - CYLINDER AND CONTROLS Pump Serial No A12907001C, Pump Model ZE6440SJ-H Cylinder Model RR30024 EQUIPPED WITH: 7.5 HP Enerpac Hydraulic Pump (Model ZE6440SJ-H...
- Trusted Seller
8 GPM COOLJET "70-30Sf HIGH PRESSURE PORTABLE COOLANT SYSTEM w/HIGH CAPACITY FILTER - 1000 PSI OPERATING PRESSURE
used
70-30SF COOLJET HIGH-PRESSURE COOLANT SYSTEM Model 70-30SF, Part No 1190, EQUIPPED WITH: Single High Capacity Filter Single High Pressure Outlet Filtered High/Low Pressure Oil Sight Gauge - Easy Oil Drain Casters...
$1,250 USDCincinnati, OH - Trusted Seller
26" x 12' CLARMATIC INDUSTRIES HEAVY-DUTY CONVEYOR-TYPE COOLANT RECLAMATION FILTRATION SYSTEM w/CM-151 COOLANT MANAGER - 5 HP DAYTON PUMP
used
- Manufacturer: Dayton
26" x 12' CLARMATIC INDUSTRIES HEAVY-DUTY CONVEYOR-TYPE COOLANT RECLAMATION FILTRATION SYSTEM EQUIPPED WITH: Feed Hopper - Coolant Storage Tank - Chain Type Chip Conveyor CM-151 Coolant Mangager 5HP Dayton Pump C...
$4,950 USDCincinnati, OH - Trusted Seller
2000 PSI CHIPBLASTER "EV2000RI" HIGH PRESSURE HIGH VOLUME COOLANT SYSTEM
used
- Manufacturer: ChipBlaster
2000 PSI CHIPBLASTER "EV2000RI" HIGH-PRESURE HIGH-VOLUME COOLANT SYSTEM - 13 GPM - 50 gallon capacity 2000 PSI CHIPBLASTER HI-PRESSURE COOLANT SYSTEM Serial No 1810, Model EV2000RI EQUIPPED WITH: Inlet, Outlet & ...
$1,450 USDCincinnati, OH - Trusted Seller
7-1/2" X 37" X 10" SET-UP-BLOCK w/(6) T-SLOTS
used
7-1/2" X 37" X 10" SET-UP-BLOCK EQUIPPED WITH: (6) T-SLOTS GENERAL SPECIFICATIONS Block Width 7-1/2" Block Height 37" Block Depth 10" SEE STOCK NUMBERS 26783 AND 26785 ALSO.
$550 USDCincinnati, OH - Trusted Seller
58" X 26" ALPHA-MAGNETS “AC2000SD” MAGNETIC CHUCK w/SD CONTROLLER - 19 SUPPORT BLOCKS
used
58" X 26" ALPHA-MAGNETS MAGNETIC CHUCK WITH CONTROLLER SERIAL NO 08G03.01, MODEL AC2000SD EQIPPED WITH: SD CONTROLLER (18) SUPPORT BLOCKS (3-ROWS OF 6) SPECIFICATIONS: Magnet, Length 58" Magnet, Width 26"
- Trusted Seller
32.75" x 50" x 38.5" HEAVY-DUTY DRILLED & TAPPED ANGLE PLATE w/ADJUSTABLE EXTENSIONS
used
32.75" x 50" x 38.5" HEAVY-DUTY DRILLED & SLOTTED ANGLE-PLATE EQUIPPED WITH: (6) Slots On Face - (1) Slot On Top Threaded Mounting Holes Face & Top (4) Adjustable Mounting Arm Extensions (6) Eyebolts GENERAL SPEC...
$3,950 USDCincinnati, OH - Trusted Seller
2-1/2" X 10' (120”) SPEGO "506-20” TURNMATIC 5-SPINDLE HYDRAULIC BAR-FEED w/SELF-CONTAINED HYDRAULICS - (2) HEAVY-DUTY SUPPORT STANDS
used
- Manufacturer: Spego
2-1/2" SPEGO "TURNAMIC 506" 5-SPINDLE BAR-FEED Serial No 96-06-481, Model 506-20 EQUIPPED WITH: Hand And Auto Controls Forward And Reverse Controls Self Contained Hydraulic System (2) Heavy-Duty Support Stands CA...
$4,950 USDCincinnati, OH - Trusted Seller
Huot Tool Scoot 48 Count Cat 40 Tool Holder Cart
used
Location San Antonio. TX Lot # 38A System ID # 4229047 End Date Central Standard Time Start Date Central Standard Time Item # 4229048 Huot Tool Scoot 48 Count Cat 40 Tool Holder Cart
Chicago, IL - Trusted Seller
1997 WALTER MODEL HELITRONIC POWER TOOL AND CUTTER GRINDER
used
- Weight: 6820
FULL ENCLOSURE COOLANT PLUMBING AND BED WASH SYSTEM HMC 400 CNC CONTROL
Huntley, IL - Trusted Seller
Okuma ALPS Live Tool
used
- Manufacturer: Okuma
Location Niles, IL Lot # 28 System ID # 4347018 End Date Central Standard Time Start Date Central Standard Time Item # 4347019 Qty 1 Okuma ALPS Live Tool OK101-13000-00
Chicago, IL 
Fadal 3016 Machining Center
used
- Manufacturer: Fadal
- Model: 3016
Good condition Fadal 3016 Machining Centers available between 1992 and 2009 years. Located in USA and other countries. Click request price for more information.
USA
Tip: Enter manufacturer, model or keyword