Used National Punch Presses

National model 124 Nut Former

• Manufacturer: National

½” National model 124 Nut Former Serial number 28822 Ref. 4430

National model 124 Nut Former

• Manufacturer: National

1974 National 89

• Manufacturer: National
• Model: 89

Maximum cutoff diameter: 1/2" | Maximum length under head: 5" | Maximum production: 100 PPM | Electrics: 480V 3 PH 60 Hz | Approximate weight: 46,400 lbs | Approx. floor size: 6'11" W x 18'2"L

National S-2

• Manufacturer: National

Maximum cutoff diameter: 15/32" | Maximum cutoff length: 1/2" | Maximum die kickout: 5/8" | Maximum production: 250 PPM | Electrics: 15 HP 230/460 Volts AC Motor | Approx. weight: 15,000 lbs | Equipped with: Bus...

National S-2

• Manufacturer: National

Maximum cutoff diameter: 15/32" | Maximum cutoff length: 1/2" | Maximum die kickout: 5/8" | Maximum production: 250 PPM | Electrics: 15 HP 230/460 Volts AC Motor | Approx. weight: 15,000 lbs | Equipped with: Bus...

1/4" National Long Stroke DSSD Cold Header

• Manufacturer: National

Maximum cutoff diameter: 1/4" | Maximum shank length: 3" | Maximum cutoff length: 4" | Maximum production: 125 PPM | Electrics: AC Motor & Controls | Approx. weight: 8,000 lbs | Equipped with: Machine was conver...

NATIONAL CF750

• Manufacturer: National

Diameter range: 22 mm | Number of dies: 5 | Number of stations (incl. cut off): 6 | Shaft length under head: 100 mm | Output – pieces/min: 70

1991 NATIONAL BM-1 S1

• Manufacturer: National

Diameter range: 32 mm | Number of dies: 4 | Number of stations: 5 | Shaft length under head: 260 mm | Cutting length: 318 mm | Output – pieces/min: 40 | Press power: 640