Processing » Heat Exchangers » Netherlands

Search By Manufacturer

Search By Province

Search By Type

Building Filters

734

Used Heat Exchangers in Netherlands

  • Trusted Seller
    Armfield FT 43-A-A

    Armfield FT 43-A-A

    • Manufacturer: Armfield

    Armfield Laboratory Pasteurizer FT 43A. With controls. Set consists out of feed tank, pump, plate heat exchanger, hot water tank, pump, holding and diverter valve. Total dimensions: 76x55x65 (lxwxh) cm - weight ...

    Lopik, Netherlands
  • Trusted Seller
    1991 GEA Ahlborn VT 4

    1991 GEA Ahlborn VT 4

    • Manufacturer: GEA

    Plate heat exchanger, sanitary (PHE). Max working pressure: 6 bar. Beam length: 165 cm, connections: 4x2" Din. Current configuration: 1 Section: 50 plates. Connections follower: 2 up/2 down. Dimensions: 38x17,5x5...

    Lopik, Netherlands
  • Trusted Seller
    APV 3HD672

    APV 3HD672

    • Manufacturer: APV

    Scrape surface heat exchanger. 2 product cylinders. Tube Ø 150 mm. Surface per tube 0,84 m². 1x Main motor which drive both dashers. Previous used on heating media: steam. Pressure product side: 12 bar. Pressure ...

    Lopik, Netherlands
  • Trusted Seller
    2009 Alfa Laval Front 8-RH

    2009 Alfa Laval Front 8-RH

    • Manufacturer: Alfa-Laval

    Plate heat exchanger, sanitary (PHE). Pressure: 16,0 bar, Beam length: 120 cm, connections: 4x3" DIN. Current configuration: 1 sections: 81 plates. Design temperature 0/120 °C. - Connections head: 2 down, followe...

    Lopik, Netherlands
  • Trusted Seller
    1977 Crepaco/APV 1HRT-672

    1977 Crepaco/APV 1HRT-672

    • Manufacturer: Crepaco

    Sraped Surface heat exchanger with 1 product cylinder, in stainless steel, tube diameter: 165 mm, length 1,830 mm. Rotor with 4 scrapers. Surface per tube 0,84 m² and volume per tube 40 ltr. Pressure: 150 psi (10...

    Lopik, Netherlands
  • Trusted Seller
    2013 Alfa Laval Front 8

    2013 Alfa Laval Front 8 RM

    • Manufacturer: Alfa-Laval

    Plate heat exchanger, sanitary (PHE). Pressure: 10,0 bar - beam length: 180 cm, connections: 8 x 3" Din. Currenct configuration: 3 Sections: 37-48-36 plates (total 121 plates) - Connections head: 2 up and 2 down,...

    Lopik, Netherlands
  • Trusted Seller
    2005 Sacome TFMI

    2005 Sacome TFMI

    • Manufacturer: Sacome

    Skid mounted tubular heat exchanger set assembled by Het Stempel. Unit exist of: #01: (Multitube, type: 1x1-TFMI-370-1-6 1/2''/19-6000-316L/2205-HARD, year: 2005, 37 tubes in 1 tube. Length 6 meter. Product side:...

    Lopik, Netherlands
  • Trusted Seller
    Crepaco 1VT422

    Crepaco 1VT422

    • Manufacturer: Crepaco

    Scraped surface heat exchanger (SSHE). 1 Vertical Product cylinder, tube: Ø 96 mm, length 1,500 mm, rotor Ø 38 mm with 2 scrapers. Cylinder material: stainless steel. Surface per tube 0,19 m² and volume per tube ...

    Lopik, Netherlands
  • Trusted Seller
    Het Stempel BV N.N.

    Het Stempel BV N.N.

    • Manufacturer: Het Stempel BV

    Tubular heat exchanger, sanitary (THE). Monotube, 1 compartment, Straight design, 8 tubes, 1 section. Length inner tube: 302 cm, length outer tube: 288 cm. Outer diameter 76 mm, inner diameter: 48 mm. Connection:...

    Lopik, Netherlands
  • Trusted Seller
    Stork DS 1525

    Stork DS 1525

    • Manufacturer: Stork

    Tubular flow sterilizer, Temperature cycles: 10-90-130/145-30-60 degrees Celcius. Including: pump, balance tank, temperature indicators. With indirect heating with steam and manual temperature control.

    Lopik, Netherlands
  • Trusted Seller
    2004 Alfa Laval Spiraflo 1x2

    2004 Alfa Laval Spiraflo 1x2 VLM 4x18/63-60-316L/304D

    • Manufacturer: Alfa-Laval

    Alfa Laval Spiraflo 1x2 VLM 4x18/63-6.0-316L/304D 2 tubular spiraflow pipes. Length pipe: 5,70 mtr. Total: 6,15 mtr. Heat transfer area: 1,29 m2 per pipe

    Lopik, Netherlands
  • Trusted Seller
    1994 Alfa Laval Clip 10-RM

    1994 Alfa Laval Clip 10-RM

    • Manufacturer: Alfa-Laval

    Pressure: 10 bar. Beam length: 3000 mm. Connections: 4 "SMS. Current configuration: 1 Section: no plates (plates alreadys dismantled). Connections head: 2 up, follower 2 under.

    Lopik, Netherlands
  • Trusted Seller
    1995 Tetra Pak Spiraflow TTF-38s/16c-3-1

    1995 Tetra Pak Spiraflow TTF-38s/16c-3-1

    • Manufacturer: Tetra Pak
    • Model: TTF38

    Monotube, outer diameter 38 mm (smouth) and inner diameter 16 mm (coagurated). 6 Tubes of 3 meter. Product side: pressure up to 60 bar - temperature up to 160 °C - volume: 1 liter per tube, total volume 6x 1 = 6 ...

    Lopik, Netherlands
  • Trusted Seller
    1959 Stork DS

    1959 Stork DS

    • Manufacturer: Stork

    Stork DS Pre-sterilizer no: 13384 Capacity: 2000 liters per hour

    Lopik, Netherlands
  • Trusted Seller
    2005 APV Crepaco SSHE

    2005 APV Crepaco SSHE

    • Manufacturer: Crepaco

    Scraped heater - cooler set, used as sterilizer, including 3 holding tubes 30 - 30 - 210 seconds (various options possible on swingbend panel). Each scraped heaterexchanger has a temperature indicator on water an...

    Lopik, Netherlands
2223242526

Overview

Heat exchangers are devices designed to transfer heat between two or more fluids without mixing them. They are widely used in various industries such as HVAC, power generation, chemical processing, and automotive to efficiently manage heat transfer processes. Common types include shell and tube, plate, and air-cooled heat exchangers.

FAQ

What factors should I consider when purchasing a heat exchanger?

Consider the type of fluids involved, the required heat transfer rate, operating temperatures and pressures, and the specific application. It's also important to look at the material compatibility and maintenance requirements.

How can I ensure my heat exchanger is shipped safely?

Use a reputable shipping service experienced in handling industrial equipment. Ensure the heat exchanger is properly packed, secured, and protected against damage during transit.

What maintenance is required for a heat exchanger?

Regular maintenance includes inspecting for leaks, cleaning to remove fouling, checking for corrosion, and ensuring all connections and seals are intact. Follow the manufacturer’s recommendations for detailed maintenance procedures.