Processing » Heat Exchangers » Utrecht

Building Filters

192

Used Heat Exchangers in Utrecht, Netherlands

  • Trusted Seller
    1997 Sacome 1x1-TFMI-370-1-6''/18-6000-316L/316L-HARD

    1997 Sacome 1x1-TFMI-370-1-6''/18-6000-316L/316L-HARD

    • Manufacturer: Sacome

    Multitube Tubular Heat Exchanger. 37 tubes in 1 tube. Length 6 meters. Product side: 200 °C - 10.0 bar - 44.08 liters - Margarine - Connection: 3'' Flange. Media side: 200 °C - 10,0 bar - 48,92 ltr - Water - Conn...

    Lopik, Netherlands
  • Trusted Seller
    Tetra Pak Multitube

    Tetra Pak Multitube

    • Manufacturer: Tetra Pak

    Tube heat exchanger, straight design multitube, length: 6mtr, 7 inner tubes with diameter 22 mm, outer tube coagurated. Outer tube diameter 113 mm. Capacity: 0,41 m2x7=2,9m2. With connections product in/out DN 80...

    Lopik, Netherlands
  • Trusted Seller
    1995 Alfa Laval Clip 10

    1995 Alfa Laval Clip 10

    • Manufacturer: Alfa-Laval
    • Model: CLIP 10

    Milk thermiser/pasteuriser for Full fatt milk, full automatic. Exisiting out of: Centrifugal pump feed pump to the pasteuriser, inlet filter, Balance tank with 3 level sensors, spraybowl for cip, 3 level sensor. ...

    Lopik, Netherlands
  • Trusted Seller
    2012 Alfa Laval Front 8

    2012 Alfa Laval Front 8 RM

    • Manufacturer: Alfa-Laval

    Plate heat exchanger, sanitary (PHE). Pressure: 10,0 bar - Beam length: 180 cm, connections: 8 x 3" DIN. Current configuration: 3 Sections: 37-48-36 plates (total 121) - Connections head: 1 up and 2 down, followe...

    Lopik, Netherlands
  • Trusted Seller
    Tetra Pak Spiraflow

    Tetra Pak Spiraflow

    • Manufacturer: Tetra Pak
    • Model: SPIRAFLOW

    Double jacketed and insulated tubular tube heat exchanger. Set of 5 tubes. Multitube, scheme: 2 x 2 in parallel and 1 in serial. Effective length 6mtr. 4 Tubes outer diameter 105 mm and 1 outer diameter 115 mm. 4...

    Lopik, Netherlands
  • Trusted Seller
    2001 Tetra Pak/Alfa Laval C6-SR

    2001 Tetra Pak/Alfa Laval C6-SR

    • Manufacturer: Alfa-Laval
    • Model: C6-SR

    Plate heat exchanger, sanitary (PHE). Dessign pressure: 10,0 bar. Beam length: 240 cm, connections: 16x 2" SMS. Current configuration: 4 Sections: 108-50-10-10 plates, total 178 plates. Connections head: 2 up, fo...

    Lopik, Netherlands
  • Trusted Seller
    Het Stempel BV N.N.

    Het Stempel BV N.N.

    • Manufacturer: Het Stempel BV

    Tubular heat exchanger, sanitary (THE). Monotube, 1 compartments, Straight design, 3 tubes, 1 section. Length inner tube: 200 cm, length outer tube 180 cm. Outer diameter 38 mm, inner diameter: 22,5 mm. Connecti...

    Lopik, Netherlands
  • Trusted Seller
    1994 Alfa Laval Clip 10

    1994 Alfa Laval Clip 10

    • Manufacturer: Alfa-Laval
    • Model: CLIP 10

    Cheese milk pasteurizer. Exisiting out of: balance tank executed in stainless steel with level senors control with spraybowl for cip, level sensor. 3 Centrifugal pumps. Plateheatexchanger, 4 section, regeneratio...

    Lopik, Netherlands
  • Trusted Seller
    1996 Tetra Pak TTF-2 84c

    1996 Tetra Pak TTF-2 84c / 38c-6-1 & BSTF-2 54c / 4x16S-6-1

    • Manufacturer: Tetra Pak
    • Model: TTF2

    Tubular heat exchanging unit. Existing out of: 14 tubes (7 sets of 2), multitube, straight design, 1 section, length: 6 mtr, outer diameter 54 mm coagurated (spiral wound), 4 inner tubes of diameter 16 mm, smooth...

    Lopik, Netherlands
  • Trusted Seller
    1995 Alfa Laval M6

    1995 Alfa Laval M6

    • Manufacturer: Alfa-Laval
    • Model: M6

    Skid mounted milk pasteurizer: Capacity: 7,000 l/h. Thermal cycle: in 4 → 55 (separator) →72 holding → 30°C. Balance tank, filter, pumps, heat exchanger Alfa-Laval M6, year: 1995, valves, control valve steam. Ins...

    Lopik, Netherlands
  • Trusted Seller
    2005 Sacome TFMI

    2005 Sacome TFMI

    • Manufacturer: Sacome

    Skid mounted tubular heat exchanger set assembled by Het Stempel. Unit exist of: #01: (Multitube, type: 1x1-TFMI-370-1-6 1/2''/19-6000-316L/2205-HARD, year: 2005, 37 tubes in 1 tube. Length 6 meter. Product side:...

    Lopik, Netherlands
  • Trusted Seller
    2007 APV N35

    2007 APV N35

    • Manufacturer: APV
    • Model: N35

    Milk pasteurization unit. complete skid mounted unit with all piping, valves on 1 stainless steel frame. Temperature scheme of milk: in 4 °C -＞ outlet to homogeniser and/or separator (homogeniser/separator exclu...

    Lopik, Netherlands
  • Trusted Seller
    Stork DS 1525

    Stork DS 1525

    • Manufacturer: Stork

    Tubular flow sterilizer, Temperature cycles: 10-90-130/145-30-60 degrees Celcius. Including: pump, balance tank, temperature indicators. With indirect heating with steam and manual temperature control.

    Lopik, Netherlands
  • Trusted Seller
    2004 Alfa Laval Spiraflo 1x2

    2004 Alfa Laval Spiraflo 1x2 VLM 4x18/63-60-316L/304D

    • Manufacturer: Alfa-Laval

    Alfa Laval Spiraflo 1x2 VLM 4x18/63-6.0-316L/304D 2 tubular spiraflow pipes. Length pipe: 5,70 mtr. Total: 6,15 mtr. Heat transfer area: 1,29 m2 per pipe

    Lopik, Netherlands
  • Trusted Seller
    1988 Stork Sterideal

    1988 Stork Sterideal

    • Manufacturer: Stork
    • Model: STERIDEAL

    Stork Sterideal. UHT line, consists of Stork UHT, Tubular indirect heating, 4 sections of triple tube (tube in tube in tube), Stork holding tube and Skid with infeed tank. new Tubular heatexchanger in 2012 only u...

    Lopik, Netherlands
23456

Overview

Heat exchangers are devices designed to transfer heat between two or more fluids without mixing them. They are widely used in various industries such as HVAC, power generation, chemical processing, and automotive to efficiently manage heat transfer processes. Common types include shell and tube, plate, and air-cooled heat exchangers.

FAQ

What factors should I consider when purchasing a heat exchanger?

Consider the type of fluids involved, the required heat transfer rate, operating temperatures and pressures, and the specific application. It's also important to look at the material compatibility and maintenance requirements.

How can I ensure my heat exchanger is shipped safely?

Use a reputable shipping service experienced in handling industrial equipment. Ensure the heat exchanger is properly packed, secured, and protected against damage during transit.

What maintenance is required for a heat exchanger?

Regular maintenance includes inspecting for leaks, cleaning to remove fouling, checking for corrosion, and ensuring all connections and seals are intact. Follow the manufacturer’s recommendations for detailed maintenance procedures.