Used ~4' x in Utrecht, Netherlands

SEARLE DSR 51-4 AL

• Manufacturer: Searle

Nice Searle evaporator (dual discharge) with 3 fans. Mentioned capacity at an air temperature of 0°C (inlet) and 8K.

2001 FUNKE FPS 120-218-4-N

• Manufacturer: Funke

Good Funke plate heat exchanger with 218 plates and a total surface of 260,13 m². Mentioned capacity at primair water in/out 20-15°C and secundair water in/out 6-12°C.

2004 Alfa Laval Spiraflo 1x2 VLM 4x18/63-60-316L/304D

• Manufacturer: Alfa-Laval

Alfa Laval Spiraflo 1x2 VLM 4x18/63-6.0-316L/304D 2 tubular spiraflow pipes. Length pipe: 5,70 mtr. Total: 6,15 mtr. Heat transfer area: 1,29 m2 per pipe

2008 GEA WP4-08

• Manufacturer: GEA

New/unused GEA plate heat exchanger with 8 plates and a total surface area of ± 0,25m² (working on refrigerant/water).

1996 Tetra Pak TTF-2 84c / 38c-6-1 & BSTF-2 54c / 4x16S-6-1

• Manufacturer: Tetra Pak
• Model: TTF2

Tubular heat exchanging unit. Existing out of: 14 tubes (7 sets of 2), multitube, straight design, 1 section, length: 6 mtr, outer diameter 54 mm coagurated (spiral wound), 4 inner tubes of diameter 16 mm, smooth...

Plate heat exchanger

Plate heat exchanger, not sanitary. 1 section with 19 plates. 4 in-/outlets of 22 mm. Total dimensions 40 x 25 x 50 cm.

2008 Tetra Pak MS10-SR

• Manufacturer: Tetra Pak
• Model: MS10SR

Pressure: 10 bar / Beam length: 1000 mm, connections: 97 mm / 4 "SMS Currenct configuration: 1 Section: 44 plates - Connections head: 2 up, follower 2 down Total dimensions: lxwxh: 125 cm x 67 cm x 130 cm.

Het Stempel BV Tube heat exchanger

• Manufacturer: Het Stempel BV

Tubular heat exchanger, sanitary (THE) and static mixer to have optiomal heat exchanging. Monotube, 1 compartment, Straight design with swirls, 4 tubes, 1 section, Length: 2 mtr, outer diameter 38 mm, inner diam...

N.N. N.N.

• Manufacturer: N.N.

Set double jacketed tanks. eacht tank is heatable or coolable, with circulation set, heatexchanger steam/water and circulation pump of water through the jackets. Volume per tank: 3 x 80 ltr. Inner dimensions per ...

1995 Alfa Laval Clip 10

• Manufacturer: Alfa-Laval
• Model: CLIP 10

Milk thermiser/pasteuriser for Full fatt milk, full automatic. Exisiting out of: Centrifugal pump feed pump to the pasteuriser, inlet filter, Balance tank with 3 level sensors, spraybowl for cip, 3 level sensor. ...

2009 Alfa Laval M10-MFG

• Manufacturer: Alfa-Laval
• Model: M10-MFG

Hot water set. PHE: Pressure: 7 bar. Beam length: 70 cm, connections: 4'', flange. Currenct configuration: 1 Section: 19 plates - Connections head: 2 up / 2 down. Including Alfa Laval centrifugal pump, year 2009...

1994 Alfa Laval M10-MFM

• Manufacturer: Alfa-Laval
• Model: M10-MFM

Plate heat exchanger, non sanitary (PHE). Pressure: 10,0 bar - Beam length: 160 cm, connections: 4 x pipe with thread Ø 60 mm and 1 x bypass pipe 40 mm. Current configuration: 1 Section: 200 plates - Connections ...

Crepaco 1VT422

• Manufacturer: Crepaco

Scraped surface heat exchanger (SSHE). 1 Vertical Product cylinder, tube: Ø 96 mm, length 1,500 mm, rotor Ø 38 mm with 2 scrapers. Cylinder material: stainless steel. Surface per tube 0,19 m² and volume per tube ...

1977 Crepaco/APV 1HRT-672

• Manufacturer: Crepaco

Sraped Surface heat exchanger with 1 product cylinder, in stainless steel, tube diameter: 165 mm, length 1,830 mm. Rotor with 4 scrapers. Surface per tube 0,84 m² and volume per tube 40 ltr. Pressure: 150 psi (10...

1983 Schröder MK04/120-820

• Manufacturer: Schroeder

Crystalliser. Scraped surface heat exchanger for Margarine. Product pressure: 20 bar. 4x Product cylinders. 4x Motors, 5,5 + 5,5 + 7,5 + 7,5 kW. Tube: Ø 120 mm, length 820 mm. Cooling surface per tube 0,62 m2. Co...