Processing » Heat Exchangers

Search By Manufacturer

Search By Country

Building Filters

868

Used ~4' x

  • Trusted Seller
    APV model SR6GLO-S plate and

    APV model SR6GLO-S plate and frame heat exchanger

    • Manufacturer: APV - Gaulin

    APV model SR6GLO-S plate and frame heat exchanger, with 16" x 50" plates, set up for (3) zones with (2) regen blocks, zone one: 22 plates – 120 square feet; zone two: 55 plates – 300 square feet; zone three: 16 p...

    Lodi, CA
  • Trusted Seller
    2004 Alfa Laval Spiraflo 1x2

    2004 Alfa Laval Spiraflo 1x2 VLM 4x18/63-60-316L/304D

    • Manufacturer: Alfa-Laval

    Alfa Laval Spiraflo 1x2 VLM 4x18/63-6.0-316L/304D 2 tubular spiraflow pipes. Length pipe: 5,70 mtr. Total: 6,15 mtr. Heat transfer area: 1,29 m2 per pipe

    Lopik, Netherlands
  • Trusted Seller
    Heat Exchanger, Shell & Tube,

    Heat Exchanger, Shell & Tube, 14 SF, Glass (50) #S429997

    • Manufacturer: Corning

    (50) Heat exchanger, Pyrex glass shell, shell & tube construction, Model 135GRB, unit features 13.50 square feet heat transfer surface area with 7 tubes, 3/4" od x 98" long. Unit is all glass construction and con...

    San Dimas, CA
  • Trusted Seller
    Heat Exchanger, Plate, 2,500 SF,

    Heat Exchanger, Plate, 2,500 SF, Sondex, 316 S/st, (112) Plates #S742450

    • Manufacturer: Sondex

    Sondex Stainless Steel Plate-type Heat Exchanger, model S160-19 113. Unit includes (112) 316 stainless steel plates measuring 92" long X 39" wide. (1) 2" in/out, (1) 4" bottom outlet, and a 19" flange leading to ...

    Chowchilla, CA
  • Trusted Seller
    Heat Exchanger, Plate, 500 SF,

    Heat Exchanger, Plate, 500 SF, S/st, Alfa Laval, Model CLIP8RH #S744987

    • Manufacturer: Alfa-Laval

    Alfa Laval Stainless Steel Plate Heat Exchanger with Divider Block and Snap-In Gaskets, Model CLIP8RH, Serial number 30104-98746, approximately 500 square feet of surface area. Rated for 15.5 bar (225 PSI) @ 110 ...

    Chowchilla, CA
  • Alfa Laval CONTHERM 6×9, surface

    Alfa Laval CONTHERM 6×9, surface scraped heat exchanger, SS

    • Manufacturer: Alfa-Laval

    4 x new Contherm 6"x9 surface scraped heat exchangers with excentric positioned rotors and mechanical seals. Gear motor: 7,5 kW and flexible coupling.

    Hirtshals, Denmark
  • Royles Calorifier

    Royles Calorifier

      1 off - USED size 1 Royles Calorifier measuring 6" dia. x 4'-11" shell plus 3" ends. Copper tubes, Mild steel shell. 1.5 bore 16 Swg. CONNECTIONS (All flanged unless stated) 1 x 3/4" BSP socket

      Blackburn, United Kingdom
    • Trusted Seller
      New Surplus AKG Model CC2500

      New Surplus AKG Model CC2500 CFM Compressed Air-cooled Aftercooler

      • Manufacturer: AKG

      NEW SURPLUS AKG model CC2500 compressed air-cooled aftercooler: Designed to cool compressed air from a compressor with 550 – 700 HP Nominal compressed air flow rate: 4316 CFM Dimensions 44.25 X 48.82 inches Conne...

      $4,995 USD
      Cranbrook, Canada
    • Trusted Seller
      Heat Exchanger, Shell & Tube,

      Heat Exchanger, Shell & Tube, 100 SF, S/st, 150 PSI, B #S743656

      • Manufacturer: Allegheny Bradford

      Stainless steel shell & tube heat exchanger, approximately 100 square feet surface area, shell measures 6" diameter x 9' long, stainless steel on both sides. Tubes are approximately 3/16" diameter 8' long, U-tube...

      Chowchilla, CA
    • 1998 Copeland D6SA4-100X-EWL

      1998 Copeland D6SA4-100X-EWL

      • Manufacturer: Copeland

      This used Refrigeration unit consists of a powerful Copeland compressor system, a plate heat exchanger from SPARK as well as extensive control of EnergythermThe system consists of the parts shown in the pictures ...

      Grenzach-Wyhlen, Germany
    • CCK 70 LB Commercial Deep

      CCK 70 LB Commercial Deep Fryer - Natural Gas - ATFS-75

      • Manufacturer: California Cooking

      CCK is proud to offer this top quality gas fryer at a groundbreaking price! Heavy duty and ready for any restaurant, cafe, deli, taqueria or more! 70 lb tank capacity Stainless Steel tank with smoothed out welds ...

      $1,763 USD
      Oakland, CA
    • Trusted Seller
      2008 GEA WP4-08

      2008 GEA WP4-08

      • Manufacturer: GEA

      New/unused GEA plate heat exchanger with 8 plates and a total surface area of ± 0,25m² (working on refrigerant/water).

      Mijdrecht, Netherlands
    • Trusted Seller
      1996 Tetra Pak TTF-2 84c

      1996 Tetra Pak TTF-2 84c / 38c-6-1 & BSTF-2 54c / 4x16S-6-1

      • Manufacturer: Tetra Pak
      • Model: TTF2

      Tubular heat exchanging unit. Existing out of: 14 tubes (7 sets of 2), multitube, straight design, 1 section, length: 6 mtr, outer diameter 54 mm coagurated (spiral wound), 4 inner tubes of diameter 16 mm, smooth...

      Lopik, Netherlands
    • Trusted Seller
      5.4 Sq.m S/S Stokvis Plate

      5.4 Sq.m S/S Stokvis Plate Heat Exchanger

        Product Description: The 5.4 Sq.m S/S Stokvis Plate Heat Exchanger is engineered for efficient heat transfer in a variety of industrial applications, including HVAC systems, chemical processing, and food and beve...

        Goole, United Kingdom
      • Trusted Seller
        Tranter 06-T26-HP50

        Tranter 06-T26-HP50

        • Manufacturer: Tranter

        Stainless Steel Plates Max Pressure: 100 psi Max Temperature: 230 degrees Tranter Heat Exchanger HE2085

        $7,500 USD
        Sparta, MI
      3637383940

      Overview

      Heat exchangers are devices designed to transfer heat between two or more fluids without mixing them. They are widely used in various industries such as HVAC, power generation, chemical processing, and automotive to efficiently manage heat transfer processes. Common types include shell and tube, plate, and air-cooled heat exchangers.

      FAQ

      What factors should I consider when purchasing a heat exchanger?

      Consider the type of fluids involved, the required heat transfer rate, operating temperatures and pressures, and the specific application. It's also important to look at the material compatibility and maintenance requirements.

      How can I ensure my heat exchanger is shipped safely?

      Use a reputable shipping service experienced in handling industrial equipment. Ensure the heat exchanger is properly packed, secured, and protected against damage during transit.

      What maintenance is required for a heat exchanger?

      Regular maintenance includes inspecting for leaks, cleaning to remove fouling, checking for corrosion, and ensuring all connections and seals are intact. Follow the manufacturer’s recommendations for detailed maintenance procedures.