Used Processing in Illinois, USA

2024 MWS S190 3DTR #R651

• Manufacturer: MWS Equipment

√ 6100mm x 1524mm (20’ x 5’)heavy duty high energy 2 bearing3 deck screen box. √ 98 kW (130Hp) engine √ Integrated hydraulic folding stockpiling conveyors √ Remote control tipping grid √ Fast on-site setup time –...

2022 Screen Machine Industries 4043T #CR404

• Manufacturer: Used

2022 Screen Machine Industries 4043T is an excellent choice for aggregate screening applications. This equipment has 3985 operating hours and is ready to optimize workflow on your job site. Featuring efficient sc...

2022 McCloskey S1903DT #R366

• Manufacturer: Mccloskey

√ 6100mm x 1524mm (20’ x 5’)heavy duty high energy 2 bearing3 deck screen box. √ 98 kW (130Hp) engine √ Integrated hydraulic folding stockpiling conveyors √ Remote control tipping grid √ Fast on-site setup time –...

Komplet Kompatto 5030 #R133

• Manufacturer: Komplet America

• Heavy duty single shaft incline screen box with adjustable stroke & speed • Quick set up • Fast conversion from 3 way split to 2way split fully hydraulic for optionally mixing oversize and midsize product • Hyd...

2024 McCloskey S1903DT #R412

• Manufacturer: Mccloskey

√ 6100mm x 1524mm (20’ x 5’)heavy duty high energy 2 bearing3 deck screen box. √ 98 kW (130Hp) engine √ Integrated hydraulic folding stockpiling conveyors √ Remote control tipping grid √ Fast on-site setup time –...

Komplet Kompatto 221 #R086

• Manufacturer: Komplet America

• High capacity up to 80 tph / 90 us tph(depending on feed size, mesh & material type) • Direct feed onto pan area • Choice of screen meshes/punch/arpa/anticlogging • Quick set up • Remote control • Hydraulically...

NOVATEC 2 CUBIC FOOT VACUUM 18735

• Manufacturer: Novatec

Novatec model 04338-20 vacuum receiver. S/N 12-784. Manufactured 11/99. Approximate 2 cubic foot capacity. 16″ OD x 22″ chamber plus bottom taper. Includes flapper valve. 2″ OD line size.

SMOOT 9″ ROTARY AIRLOCK 19010

Smoot 9″ rotary airlock. S/N 10292. 9″ x 9″ throat opening with 11″ x 11″ bolt flange. Powered by a 3/4 HP 208-230/460-volt motor thru a gearbox. Has 5″ OD blow-thru mounted on under-side discharge.2 Available

PRODUCT DESIGN & DEVELOPMENT 2 18703

One (1) used Product Design and Development two lane profile notcher. Air actuated. 5″ x 2 ¼” cylinder. Two post design. Stand mounted.

TECHNO-PLAST PULLER / TRAVELING SAW 18683

• Manufacturer: Techno-Plast

Used Techno-Plast model TRZ-240SA/300 Puller/Traveling Saw Combination. S/N 7010750. 9 1/4″ wide cleats with 96″ belt contact length. Chain driven with dual pneumatic gap adjustment. Air traveling with nominal 14...

GREINER 80/9 PULLER / SAW 18515

• Manufacturer: Greiner

Used Greiner model 80/9 Puller / Traveling Saw Combination. S/N R9804350. Utilizes nominal 9 1/4″ wide cleats with 108″ belt contact length. Chain driven with dual pneumatic gap adjustment. Air traveling saw with...

GOODMAN CUTTER / PULLER 18397

One (1) used Goodman puller / cutter combination. S/N 6498. Nip roll puller has 3.5″ wide x 4″ diameter rolls. Puller driven by approximately a 3 HP A/C motor. On demand cutter can handle up to a 3″ OD bushing. C...

PAIR MEYER 5.5″ ID AIRLOCKS 18432

• Manufacturer: Meyer

Pair of incomplete William J. Meyer HDX series 5.5″ airlocks. S/N 291105-010B and 292545-010A. Both have 11″ OD bolt flange mount with 5.5″ OD airlock inlet and outlet. Cast iron airlock housing with replaceable ...

CDS CBH36-6 6″ X 36″ 18259

• Manufacturer: CDS

CDS model CBH 36-6 belt puller. S/N 230202. Has nominal 6″ wide belts with 36″ of belt contact length. Set up for right to left operation. Top and bottom belt manually height adjustable via hand wheel. Belts are ...

LORENZ 6″ OD DIVERTER 18210

• Manufacturer: Lorenz

Lorenz model DV2-600-11AL-ST-C 6″ OD diverter. S/N 35588-01. Has 6″ OK160 pipe adapters that can be removed to go back to 6″ OD flange less pipe. Aluminum construction

Clamco 1614 Shrink Wrapping Machine

• Manufacturer: Clamco
• Model: 1614

Good condition Clamco 1614 Shrink Wrapping Machines. Located in USA and other countries. Click request price for more information.