Used processing

Universal Dynamics Una-Dyn Gas-Pack GasPack Process Air Dryer

• Manufacturer: Una-Dyn

ITEM #: 17023 Used Universal Dynamics Una-Dyn Gas-Pack GasPack Process Air Dryer Rated for 750 CFMNatural gas 460 VoltRated for 224,000 BTU/hr All prices are FOB Millwood WV unless otherwise noted. Please contact...

Universal Dynamics Una-Dyn Gas-Pack GasPack Process Air Dryer

• Manufacturer: Una-Dyn

ITEM #: 17024 Used Universal Dynamics Una-Dyn Gas-Pack GasPack Process Air Dryer Rated for 750 CFMNatural gas 460 VoltRated for 224,000 BTU/hr All prices are FOB Millwood WV unless otherwise noted. Please contact...

Universal Dynamics Una-Dyn Gas-Pack GasPack Process Air Dryer

• Manufacturer: Una-Dyn

Rated for 750 CFM Natural gas 460 Volt Rated for 224,000 BTU/hr

Universal Dynamics Una-Dyn Gas-Pack GasPack Process Air Dryer

• Manufacturer: Una-Dyn

Rated for 750 CFM Natural gas 460 Volt Rated for 224,000 BTU/hr

4.2 CU. FT. ROTO-FINISH "ST-4DUOO SPIRATRON" BOWL-TYPE VIBRATORY DRYER

4.2 CU. FT. ROTO-FINISH "SPIRATRON" VIBRATORY DRYER SERIAL NO 3946, MODEL ST-4DUOO, SERIES 4D-80-83 EQUIPPED WITH: BOWL TYPE DESIGN UNLINED STEEL TUB CATALOGUE SPECIFICATIONS: Operating Capacity, Maximum 4.2 CU F...

IDD Process Packaging Stainless Bulk Dryer System 52x120x96" ID 20kw Blowers x3

• Manufacturer: IDD Process Packaging

Used, in Good Working Condition. This is a dryer system for beverage packaging industry. This would blow dry large volume of products. All stainless construction. Floor is a fiberglass type. Max Inside working is...

Porcupine Dryer 1P3018UTC Gale Process Solutions - IPP# 85676

Single agitator design. Trough is not jacketed Agitator is hardfaced and rated 150 psig @ 650 degree F vessel rated atmospheric @ 650 degree F Trough contains approximately 62 cu. ft. of processing space Complete...

Stainless Steel 316 Patterson Process Equipment Dryer-Twin Shell & Double Cone - IPP# 202096

• Manufacturer: Patterson Process Equipment

Shell 6' diameter x 20" straight side x 4' long conical sections With vacuum arm.

Stainless Steel 304 American Process Systems C060/6660 Dryer-Rotary Vacuum - IPP# 232737

• Manufacturer: American Process Systems

cylindrical design Vessel designed for 14.9 psi and full vacuum rated at 29.92” Hg. This machine is designed for continues operation but was previously used in a batch process. The jacket is two zone style with 3...

Carbon Steel Gale Process Solutions 1P3012 Dryer-Porcupine - IPP# 212620

• Manufacturer: Bethlehem Corp

With drive and panel coils utilizing steam as the heat transfer medium agitator is ;142 sq. ft Trough is; 208 sq. ft The working volume is, 39.3 cu.ft It has a single shaft design supported by pillow block bearin...

Porcupine Dryer Gale Process Solutions 1P1203 Stainless Steel 316 - IPP# 207268

• Manufacturer: Bethlehem Corp

REBUILT 2.1 cu. ft. operating capacity Jacketed Porcupine Processor designed for batch operation manufactured by Bethlehem Foundry and Machine Company Shell is rated for MAWP 50 PSI Porcupine surface area is 15 s...

Carbon Steel Gale Process Solutions 1P1208JTC Dryer-Porcupine - IPP# 85892

• Manufacturer: Bethlehem Corp

UNUSED One agitator. Jacketed trough Completely fabricated and assembled except for the following: Johnson rotary joint, drive motor, drive gear and coupling No cover, agitator 35 sq.ft. trough 55 sq.ft.

Carbon Steel Gale Process Solutions 1P1203JT Dryer-Porcupine - IPP# 12784

• Manufacturer: Bethlehem Corp

porcupine processor Unit has 2.10 cu ft operating volume15 sq ft porcupine surface9 sq ft jacket surface Should be a candidate for scrap

Carbon Steel Gale Process Solutions 1P1203JTB Dryer-Porcupine - IPP# 12783

• Manufacturer: Bethlehem Corp

Heating medium is hot oil or steam Vessel rated 20 psig and full vacuum Working volume 2.10 cubic feet Agitator 15 square feet of heating area and 9 square feet on the jacket 3/60/220/440 volt. Requires motor

Carbon Steel Gale Process Solutions 1P3018JTC Dryer-Porcupine - IPP# 46254

• Manufacturer: Bethlehem Corp

This one probably requires a lot of work 223 sq. ft. of heat area on the agitator 102 square feet on the jacket Original design speed 10 rpm Pitch angle of agitator is 1 degree Trough width is 30"length is 218"wi...