Processing » Extruders » Single Screw Extruders

Search By Manufacturer

Search By Country

Building Filters

Related Events

Live Now

Murphy Bed Express

by EX-FACTORY, INC

Bronx County NY, USA
Ends Sep 10th, 15:00 CDT
View event
2917

Used Single Screw Extruders

  • Gloucester 2522 R2 2.5" Extruder

    Gloucester 2522 R2 2.5" Extruder – 60 HP, 32:1 L/D, Reconditioned

    • used

    • Manufacturer: GloucesterGloucester

    10755143 Used Gloucester Model 2522 R2 2.5" 32:1 L/D Extruder with an electrically heated, water cooled (closed loop) vented and plugged barrel at approximately a 72" centerline height. Gearbox has a reduction ra...

    Belvidere, IL
  • Gloucester 2.5" Single Screw Extruder

    Gloucester 2.5" Single Screw Extruder – 32:1 L/D, Air-Cooled & Vented

    • used

    • Manufacturer: GloucesterGloucester

    10755144 Used Gloucester 2.5" Extruder 32:1 L/D five (5) zone air cooled and vented barrel at a 45" centerline height. Top center feed throat. Driven by a 50 HP A/C 1750/2100 RPM motor, includes 6 zone temperat...

    Belvidere, IL
  • American Kuhne AK120mm 30:1 Single

    American Kuhne AK120mm 30:1 Single Screw Extruder 2013

    • used

    • Manufacturer: Kuhne

    American Kuhne AK120mm 30:1 Single Screw Extruder 2013 Screw Size: 120 mm 30:1 L/D Ratio 200 HP motor Digital Controls 42″ Centerline Height Electrically heated – Air Cooled Barrel 480v

    Rockville Centre, NY
  • Pre-Owned Killion KL-075 Single Screw

    Pre-Owned Killion KL-075 Single Screw Extruder – Electrically Heated, Air-Cooled

    • used

    • Manufacturer: KillionKillion

    54037006 Used Killion KL-075 Single Screw Extruder. 19.1 mm Diameter screws. 25:1 L/D. Screw speed 12-120 RPM via a gearbox by a 1.1 kW-380 volt/50cycle/3Ph DC motor. 3 housing sections. Electrically heated, air ...

    Belvidere, IL
  • Trusted Seller
    1995 HPM TMIII

    1995 HPM TMIII

    • used

    • Manufacturer: HPM
    • Model: TMIII

    Used 4.5” HPM Single Screw Extruder 30/1 L/D Model: TMIII Year: 1995 6" x 6" top center feed throat Driven by a 250 hp DC motor, 460 volt AC input and a Powertec motor control with 460 volt 50/60 Hz AC input. Gea...

    Hainesport, NJ
  • Gloucester Model 35250R2 3.5" Diameter

    Gloucester Model 35250R2 3.5" Diameter Single Screw Extruder – Industrial Used

    • used

    • Manufacturer: GloucesterGloucester

    10755151 Used Gloucester Model 35250R2 3.5" Diameter Single Screw Extruder. 3.5" diameter screw, 32:1 L/D. Has an electrically heated, air cooled, vented, and plugged barrel at approximately a 65? center line hei...

    Belvidere, IL
  • Gloucester 3.5" Single Screw Extruder

    Gloucester 3.5" Single Screw Extruder – Model 35250R2, 32:1 L/D, 100 HP Motor

    • used

    • Manufacturer: GloucesterGloucester

    10755150 Used Gloucester 3.5" Single Screw Extruder, Model 35250R2. 3.5" diameter screw, 32:1 L/D. Having an electrically heated, air cooled, and non-vented barrel at approximately a 65" center line height. Barre...

    Belvidere, IL
  • Trusted Seller
    Royle 3.5"

    Royle 3.5"

    • used

    • Manufacturer: Royle

    Used 3.5” Royale Plastic Single-Screw Extruder Right angle reducer to a 60 hp Louis Allis type CLC Eddie Current clutch

    Hainesport, NJ
  • Trusted Seller
    1999 BUSS MDS200-4

    1999 BUSS MDS200-4

    • used

    • Manufacturer: Buss
    • Model: MDS200-4

    Used 8” Buss Hot Melt Single-Screw Extruder and Pelletizing System Model: MDS200-4 Year: 1999 Screw is water heated/cooled Direct driven by a 100 hp DC motor, volt, rpm

    Hainesport, NJ
  • Trusted Seller
    1986 Gloucester 60mm

    1986 Gloucester 60mm

    • used

    • Manufacturer: Gloucester

    Used 2.36” (60mm) Gloucester 32/1 L/D vented single screw Extruder. Year 1986. Driven by a 50 hp DC motor and SCR control. Gearbox 9.48:1 ratio, serial 140. Barrel has 45” centerline height. Includes temperature ...

    Hainesport, NJ
  • Davis Standard 9" Extruder, Model

    Davis Standard 9" Extruder, Model 80IN80HT – 32:1 L/D, 900 HP Motor, Built 2001

    • used

    • Manufacturer: Davis-Standard

    10755163 Used Davis Standard 9" Extruder, Model 80IN80HT. 32:1 L/D ratio; (7) zone electrically heated, water cooled (closed loop), and vented barrel at a 44" center-line; 10.15:1 Gearbox reduction ratio; Gearbox...

    Belvidere, IL
  • Trusted Seller
    1984 DAVIS STANDARD 150INDS-20

    1984 DAVIS STANDARD 150INDS-20

    • used

    • Manufacturer: Davis-Standard

    Used 1.5” Davis Standard Vented Single-Screw Extruder Model: 150IN DS-20 Year: 1984 Driven by a nontagged motor and a Reliance model GV3000 AC drive Gearbox: 6.53:1 ratio, rated for 50 hp, 1.25 service factor, 15...

    Hainesport, NJ
  • Welex 3.5" 30:1 L/D Extruder

    Welex 3.5" 30:1 L/D Extruder – 150 HP, Vented Barrel, Melt Pump & Screen Changer

    • used

    • Manufacturer: Welex

    10755146 Used Welex 3.5" 30:1 L/D Extruder. Electrically heated water cooled (closed loop) and vented barrel at an approximate 69" center line height. Center line height can be reduced approximately 8" by removin...

    Belvidere, IL
  • Gloucester 25225R2 Single Screw Extruder

    Gloucester 25225R2 Single Screw Extruder – 2.5" Dia., 32:1 L/D, 60 HP Motor

    • used

    • Manufacturer: GloucesterGloucester

    10755152 Used Gloucester Single Screw Extruder, Model 25225R2. 2.5' Diameter Screw, 32:1 L/D. Has an electrically heated, air cooled, and non-vented barrel at approximately a 65? center line height. Barrel is se...

    Belvidere, IL
  • Trusted Seller
    1982 Wayne 1.25"

    1982 Wayne 1.25"

    • used

    • Manufacturer: Wayne

    Used 1.25” Wayne Single-Screw Extruder Year: 1982 Driven by a 7.5 hp DC motor with SCR control,230 volt

    Hainesport, NJ
45678

Overview

Single screw extruders are industrial machines used to process and shape plastic materials by forcing them through a shaped die. They are widely used in the plastic manufacturing industry for producing pipes, sheets, films, and other plastic products. These machines are known for their efficiency and ability to handle a variety of plastic types.

FAQ

What should I consider when buying a used single screw extruder?

Consider the machine's age, condition, screw diameter, and length-to-diameter ratio. Check for maintenance records and ensure the extruder has been well-maintained and properly serviced.

How do I ensure the single screw extruder is shipped safely to my location?

Use a reputable transport service that specializes in heavy machinery. Ensure the extruder is properly secured and protected during transit, and verify all necessary parts are included.

What is the maintenance schedule for a single screw extruder?

Regular maintenance includes checking and replacing worn screws and barrels, inspecting heating and cooling systems, and ensuring proper lubrication of moving parts. Consult the manufacturer’s manual for detailed maintenance intervals and procedures.