Used processing

1999 1999 Davis Standard 4.4" Twin Screw Extruder
- Manufacturer: Davis-Standard
Size: 112 mm | Screw type: Twin | Voltage: 460/3/60
Valley City, OH
1980 1980 Sterling 6" Extruder Compoundng Line
- Manufacturer: Sterling
– Feeder Included – 24″ Long Die w/ (4) Cartridge Heaters, (35) Hole Die Plate – Hydraulic System, Has (2) New 6″ Breakers w/ New Slide Plate – (1) Gearbox, (3) Screws, (8) Barrel Heaters, (6) Screen Changer Heat...
Valley City, OH
2020 2020 Krauss Maffei Extruder
- Manufacturer: Krauss-Maffei
– Control System Included Size: 250mm mm | L/d: 30:1 | Vented: side vented | – model: KE250x30D
Valley City, OH
Davis-Standard 2.5" Extruder
- Manufacturer: Davis-Standard
– Watts Per Heat Zone – 5,000 – Heater Elements Rated 460v in Series – Heater Elements Rated 230v in Parallel
Valley City, OH
1989 8" APV Extruder
- Manufacturer: APV - Gaulin
700hp motor Size: 8 | Horsepower: 700 | Voltage: 480v
Valley City, OH
Davis-Standard 2.50-PS
- Manufacturer: Davis-Standard
Size: 2.5 in | Controls: Exstar-2
Valley City, OH
2015 Crown 2.5" Single Screw Extruder
- Manufacturer: Crown
– 40″ Barrel Center Line – 10 – 200 Kgs/hr – Oversized HP Rating – Designed for 10,000 PSI Max Pressure – Closed Loop Cooling System
Valley City, OH
NEW Nakata Triplex 200P x 200P x 200P Extruder
- Manufacturer: NEW Nakata
One (1) NEW Nakata 'TRIPLEX 200P×200P×200P' Triple Rubber Extruder, Piggyback Configuration, Cotter Clamp Type, Model TRIPLEX 200P×200P×200P, S/N E235067~5077, YOM 2025, Description of Asset: φ200mm Pin type extr...
Cleveland, OH
Flender 6" Plastic Extruder
- Manufacturer: Flender
One (1) Used Flender 6" (150mm) Plastic Extruder, 30:1 L/D, no motor, direct drive, lowboy gearbox, unitized base, rated at 500 HP (372 KW)
Cleveland, OH
11" Ventura Hydraulic Fabricators horizontal ram Extruder
Used 10" Ventura Hydraulic Fabricators horizontal ram extruder, approximately 8" x 12" feed opening with screen changer, hydraulically operated less pump. 11" Ventura Hydraulic Fabricators horizontal ram Extruder
Cleveland, OH
NRM 3 1/2" Rubber Extruder
- Manufacturer: NRM
One (1) Used NRM 3.5" 90mm Cold Feed Rubber Extruder, 12:1 L/D, 24.9:1 G/B ratio, US Motors 75 HP DC, 1750/2100 RPM, 500 VDC motor, power feed roll, S/N T61335
Cleveland, OH
RMS 4.5" 120mm Pin Barrel Rubber Extruder
- Manufacturer: RMS
One (1) RMS 4.5" 120mm Pin Barrel Rubber Extruder, 14:1 L/D, 150 HP 1150 RPM 500 VDC motor, variable straight delivery head, forced lube system, power feed roll, feed roller equipped with external bearings and ad...
Cleveland, OH
Davis Standard 2 1/2" Extruder
- Manufacturer: Davis-Standard
One (1) DS Davis Standard 2.5" 60mm Cold Feed Rubber Extruder, Model 25IN25DSREV, 20:1 L/D, 17.26:1 G/B ratio, Toshiba 40 HP 1170 RPM 460 VAC motor, VFD variable frequency drive, control panel, clamp assembly, fo...
Cleveland, OH
Farrel 4.5" Plastic Extruder
- Manufacturer: Farrel
Item 6556 - One (1) Used Farrel 4.5" (120mm) Plastic Extruder, 12:1 L/D, 125 HP 1750/2000 RPM 500 VDC motor, direct drive, lowboy gearbox, unitized base, no head
Cleveland, OH
Siemens Extruder Drive
- Manufacturer: Siemens
One (1) Used Siemens 75 HP Microprocessor DC drive, S/N 16-96-D3607501-01.
Cleveland, OH