Used Extruders

3.5″ Davis Standard 24:1-Air Cooled -N-Vented Extruders (3) 1998
- used
- Manufacturer: Davis-Standard
3.5″ Davis Standard Extruders Model #MV35IN35 – New 1998 (Three Available) Air Cooled 24:1 L/D Non-Vented HP 158 Gear Ratio: 17.39 SF 1.25
Rockville Centre, NY
Trusted Seller
2002 COPERION 2.3"
- used
- Manufacturer: Coperion Waeschle
Used 58mm Coperion Co rotating Mega Compounder with 11 barrel sections (34/1 L/D) and side feeder, New 3/2002. Has electrically heated water cooled barrel. Direct connected to 500 hp DC motor with SCR controller....
Hainesport, NJ
Trusted Seller
BUSS 200 HP
- used
- Manufacturer: Buss
Used 100mm Buss kneader with 9/1 L/D barrel. Driven by 200 hp DC motor, includes 5.94/1 gearbox, jacketed barrel and clam shell barrel opening. Includes operator control panel. Kneader will discharge into approxi...
Hainesport, NJ
Trusted Seller
CO-EX BLOCK 6-Layer
- used
- Manufacturer: CO-EX BLOCK
Used extrusion co-ex Block last used in a laboratory environment with approximately 1.25" diameter extruders and a 12" sheet die. Includes six (6) inserts of varying percentages. Five (5) are in a box and one (1)...
Hainesport, NJ
Trusted Seller
2000 CLOEREN 2.5", 3.5" and 5.25"
- used
- Manufacturer: CLOEREN
Used Cloeren 3-layer co-ex block designed for asymmetric layer configurations (A/B/C at 12/64/24%). For 2.5", 3.5" and 5.25" extruders. Manufactured 2000 Never used. Feed block is a variable geometry vein type.
Hainesport, NJ
Trusted Seller
LEISTRITZ 30mm
- used
- Manufacturer: Leistritz
Used 30mm Leistritz counter-rotating twin screw extruder, 42/1 L/D vented barrel. New 1987. Has 11kw motor, 2200 rpm, 422 volt input. Gearbox rated at 13.5kw at 60hz. Barrel is electrically heated and air cooled ...
Hainesport, NJ
Trusted Seller
Koellmann CG14-0-201
- used
- Manufacturer: Koellmann
Used 53mm NFM Welding Engineers side feed extruder with no barrel or screws. Has Koellmann gearbox, size CG14-0-201, serial #1227336/1, with 5.06/1 ratio, service factor 1.0, input rpm 1750, output rpm 350, ratin...
Hainesport, NJ
Trusted Seller
2003 WERNER & PFLEIDERER ZSK20
- used
- Manufacturer: WP
- Model: ZSK20
Used 20mm Werner & Pfleiderer model ZSK20 co-rotating twin screw extruder. Has 40/1 L/D barrel at 43" centerline height driven through a 3:1 gearbox with a 37-Newton meter torque capacity per screw shaft. Extrude...
Hainesport, NJ
Trusted Seller
PRODEX 4.5"
- used
- Manufacturer: PRODEX
Used 4.5" pelletizing line consisting of the following: - 4.5" Prodex 34/1 L/D vented extruder including strand die, Lufkin "Change Gear" gearbox with 15.03/1 reduction, and an hydraulic screen changer with pump....
Hainesport, NJ
Trusted Seller
WERNER & PFLEIDERER ZSK20
- used
- Manufacturer: WP
- Model: ZSK20
Used Werner & Pfleiderer model ZSK40, 40mm co-rotating twin screw extruder. 1990 model year. 46:1 L/D vented barrel with 11-barrel sections and a 41" centerline height. Driven by 50 hp 500 volt 1750/2100 rpm DC m...
Hainesport, NJ
Trusted Seller
2002 LEISTRITZ ZSE 100
- used
- Manufacturer: Leistritz
Used Leistritz 100mm Co-Rotating Twin Screw Extruder. Model #ZSE 100 GLAAX, serial #3092, new 2002. Driven by 330 kw (442 hp), 1600 rpm DC motor with SCR control. Has 300 rpm screw speed, rated at 5000 Newton met...
Hainesport, NJ
Trusted Seller
Cincinnati Argos 112P-65-20-1150-UL
- used
- Manufacturer: Cincinnati
Used 112mm Cincinnati model Argos 112P-65-20-1150-UL parallel counter rotating twin screw plastic extruder. Screw length approximately 3020mm long x 112mm diameter screw, L/D ration of 27:1. Barrel is electricall...
Hainesport, NJ
Coperian ZSK-18 ML Twin Scrw Extruders New 2008 (3 available)
- used
Coperian ZSK-18 ML Twin Scrw Extruders New 2008 (3 available) Screw Diameter: 18 mm/twin screw 15 HP Centerline – 1100mm/43.3″ Water Cooled 460 volt
Rockville Centre, NY
Trusted Seller
Motan 100
- used
- Manufacturer: Motan
Used 300 lb. Motan model 100 desiccant dryer. No hopper included. Serial #9003860. 6 kW total heater load, 80-100 psi air, 2.3 HP. 240 volt AC input.
Hainesport, NJ
Trusted Seller
1997 PIOVAN T6000ix
- used
- Manufacturer: Piovan
Used 6000 lb Piovan stainless steel drying hopper. New 1997. Hopper model T6000ix. Hoppers are approximately 60" o.d. X 14' tall.
Hainesport, NJ