Used Extruders

Trusted Seller
ROCHELEU 11" Wide
- used
- Manufacturer: ROCHELEU
Used 11" Wide Dual Head Strand Air Knife With Blower Heads mounted on adjustable height brackets for center line adjustment
Hainesport, NJ
Trusted Seller
BERINGER 1228-M-315
- used
- Manufacturer: BERINGER
Used 3.5" Beringer Slide Plate Screen Changer. Model #1228-M-315, serial #R31006. Includes hydraulic pumping system. Screen changer mounted on stand supplying approximately 42" discharge height. Max operating pre...
Hainesport, NJ
Trusted Seller
Hydraulic Pumping System With High Pressure Accumulator
- used
Used Hydraulic Pumping System with 2 hp motor and high pressure accumulator.
Hainesport, NJ
Trusted Seller
NEW HAMPSHIRE HYDRAULICS
- used
- Manufacturer: NEW HAMPSHIRE HYDRAULICS
Used Extech Hydraulic Power Pack for a Screen Changer. 2 hp motor. With oil filter, accumulator and motor starter with controls. Rebuilt in 2024.
Hainesport, NJ
Trusted Seller
Extruder Line Pipe Acc Die
- used
Used 1/2" tubing die electrically heated and adapted to fit 1 1/2" Sterling extruder.
Hainesport, NJ
Lleal AME-2600 SF-H Double Sigma Extruder Kneader | 350 Gal Working | Vacuum Rated | 300 HP
- used
- Manufacturer: Sigma
54020001 Used Lleal Model AME-2600 SF-H Double Sigma Extruder Kneader, Carbon Steel. Useful volume 350 gallon, total volume 2,600 liter (680 gallon). Vacuum Rated 356 degrees F at 60psi. Sigma blades. Hydraulica...
Belvidere, IL
Trusted Seller
Gatto DPC 107B 14-3
- used
- Manufacturer: Gatto
Used Gatto 14' long stainless steel 3-chamber differential pressure calibration/vacuum sizing tank. Model DPC 107B 14-3, Serial # 691891. Has 13" X 13" cross section, 2 pumps, and stainless steel reservoir. Missi...
Hainesport, NJ
Trusted Seller
AUTOMATED DOWNSTREAM EQUIPMENT 15'
- used
- Manufacturer: AUTOMATED DOWNSTREAM EQUIPMENT
Used 15' Automated Downstream Equipment stainless steel spray cooling tank. Has 11" x 11" cross section, 15' total length. Includes heat exchangers and filter. No pump included. Includes blower and air knife for ...
Hainesport, NJ
Trusted Seller
TEC POLYMER 12'
- used
- Manufacturer: TEC POLYMER
Used 16" x 12' Stainless Steel Water Spray Cooling Trough Manufacturer: TEC Polymer
Hainesport, NJ
Trusted Seller
2-ROLL PULLER 6" DIA.
- used
- Manufacturer: 2-ROLL PULLER
Used 2-roll puller. 6" diameter X 10" long.with motor
Hainesport, NJ
Trusted Seller
2-ROLL PULLER 6" DIA.
- used
- Manufacturer: 2-ROLL PULLER
Used 2-roll puller. 6" diameter X 10" long. Rubber rolls with motor
Hainesport, NJ
Trusted Seller
FARRIS 8550F
- used
- Manufacturer: Farris
Used Farris 12" Wide x 30" Long Solid Belt Puller Manufacturer: Farris Model: 8550F Has manual belt adjustment, and variable speed transmission Rated 3-50 feet per minute
Hainesport, NJ
Trusted Seller
GOODMAN 3" Wide x 22" Long
- used
- Manufacturer: GOODMAN
Used Goodman Solid Belt Puller – Approx. 3" (76 mm) Wide x 22" (559 mm) Long Solid belt design with an approximate belt width of 3 inches (76 mm) and length of 22 inches (559 mm). Frame includes a provision for i...
Hainesport, NJ
Trusted Seller
MERRITT DAVIS 80
- used
- Manufacturer: Merritt Davis
Used 6" wide Merritt Davis model 80 solid belt puller supplying 80" belt contact length and approximately 8" of daylight on belts. Top and bottom belts are driven by drive shaft from 15 HP motor, and approximatel...
Hainesport, NJ
Trusted Seller
Lumber Tooling 6"
- used
- Manufacturer: Lumber Tooling
Used artificial lumber tooling previously used for various shapes. Approximately 6" in width.
Hainesport, NJ