Used processing

EREMA PC1007T FILM RECLAMATION LINE 18886

• Manufacturer: Erema

2012 Erema model PC1007T film reclaim lineS/N P11/232. Rated at 350-430 kgs/hour on LDPE and LLDPE and 300 kgs/hour on HDPE. line consists of the following:Model FB6000/900 inclined cleated in-feed conveyor measu...

3.5″ STATIC MIXER 18860

Used 3.5″ static mixer. 24″ long. 10″ OD flanged and threaded with 3.5″ inlet and 2.5″ OD opening. 9″ OD flange with 2.5″ opening.

DYNISCO 60 HP MELT PUMP 18829

• Manufacturer: Dynisco

One used Dynisco model MSDP-430 melt pump. S/N M54343035. last used with 8″ 900 HP extruder. Includes 60 HP 480-VOLT Blue Max A/C inverter duty motor, gearbox, stand, and static mixer

JOHNSON 54 X 8 PULL 18800

• Manufacturer: Johnson

Johnson roll pull roll stand. Two (2) 54″ x 8″ diameter rubber covered rolls. Rolls are driven by an approximate 10 HP D/C motor through a “Drive-All” four speed gearbox. Air actuated top pull roll.

UN 14 ZONE EXTRUDER TEMPERATURE 18779

One (1) unused extruder temperature control panel consisting of fourteen zones of Eurotherm 2216E temp controls. Was set up for use with a 4.5″ 32:1 Gloucester extruder. Labeled for 5 extruder zones, 1 screen cha...

STERLING 6005FD-EZAC 5 HP BLOWER 18773

• Manufacturer: Sterling

Sterling model 6005FD-EZAC blower. S/N 79380. Directly driven impeller by a 5 H 230/460-volt motor. Has hinged door for easy impeller change out. 6″ OD inlet and outlet with Kongskilde OK160 rolled flange weld a...

CLOEREN 70″ AUTOFLEX SHEET DIE 18753

One (1) Cloeren 70″ auto-flex sheet die. 1″ x 4″ back center feed entrance. S/N 77831-2129. Manufactured April, 2003.

DYNISCO EH-60 6″ SCREEN CHANGER 18751

• Manufacturer: Dynisco

One (1) Dynisco model EH-60 screen changer having two nominal 6″ diameter breaker plates.

WELEX / MAAG 20 HP 18672

• Manufacturer: Welex

Welex / Maag model 56/56 20 HP melt pump with drive

BATTENFELD CM55 TWIN SCREW EXTRUDER 18510

• Manufacturer: Battenfeld

Used Battenfeld-Cincinnati model CM55 counter rotating twin screw extruder. S/N 2804784/010. Conical screw design. Barrel is electrically heated and air cooled in three zones with air blowers with .20 kw motors. ...

CINCINNATI 112mm TWIN SCREW EXTRUDER 18512

• Manufacturer: Cincinnati

Used Cincinnati model Argos 112P-65-20-1150-UL 112mm parallel counter rotating twin screw plastic extruder. S/N 2041843/010. Screw length approximately 3020mm long x 112mm diameter screw, L/D ratio of 27:1. Barre...

BERINGER 3.5″ SCREEN CHANGER 18671

Beringer 3.5″ hydraulic screen changer with power pack

WELEX 18″ X 41″ 3 18674

• Manufacturer: Welex

Welex model 18X41RHSL 18″ x 41″ 3-roll sheet extrusion stack. S/N 4750. Rolls are silent chain driven by a 5 HP D/C motor and have air actuated nipping pressure with 8.5″ OD cylinders. Has 42″ wide rubber to meta...

MGB SL12 12″ SCREEN CHANGER 17616

21409-11 One (1) used MGB Model SC12 slide plate screen changer having two (2) nominal 12″ diameter breaker plates. Unit is mounted on a stand with casters supplying approximately a 42″ discharge height. Package ...

BERLYN 2″ 30:1 L/D 40 18399

One (1) Used 2” Berlyn extruder having a 30:1 L/D ratio with a six (6) zone electrically heated, non-vented, both air- and water-cooled barrel at approximately a 42″ center line height. S/N 025D379. Gearbox is a ...