Used processing

DAVIS STANDARD 130mm 32:1 L/D 18935

• Manufacturer: Davis-Standard

One (1) used Davis Standard 130mm (5.1″) model 130IN45HT extruder. S/N U7644. Shop order 58491. Extruder has 32:1 L/D ratio with a seven (7) zone electrically heated, air cooled, and non-vented barrel at a 42″ ce...

DAVIS STANDARD 4.5″ 30:1 L/D 18937

• Manufacturer: Davis-Standard

One (1) used Davis Standard model 45IN45 extruder. S/N M3316. Shop order 05432. Extruder has 30:1 L/D ratio with a six (6) zone electrically heated, air cooled, and non-vented barrel at a 42″ center-line. Gearbox...

DAVIS STANDARD 4.5″ 30:1 L/D 18936

• Manufacturer: Davis-Standard

One (1) used Davis Standard model 45IN45 extruder. S/N M3315. Shop order 05432. Extruder has 30:1 L/D ratio with a six (6) zone electrically heated, air cooled, and non-vented barrel at a 42″ center-line. Gearbox...

EDI 59″ SHEET DIE 18873

• Manufacturer: EDI

One used Nordson / Extrusion Dies Inc model Ultraflex R-75 59″ heavy duty sheet die. S/N 73-1362-2-3. Integral upper flexible lip and fixed removable lower lip. Adjusting bolts on 1″ centers. 45-degree restrictor...

EDI / NORDSON 56″ SHEET 18833

• Manufacturer: EDI

One (1) used Nordson/ Extrusion Dies Inc Model Ultraflex HRMC-100 heavy duty sheet die with a 56″ slot opening. Integral upper flexible lip and fixed removable lower lip. Adjusting bolts on 1″ centers. 45-degree ...

WELEX 6″ 36:1 L/D 500 18830

• Manufacturer: Welex

One (1) used Welex model 6.0 36D 6″ 36:1 L/D extruder. S/N 6492. Having an electrically heated, water cooled (closed loop), and vented barrel at an approximate 66″ center line height. Koellman model Unex 8.13 gea...

BATTENFELD / GLOUCESTER 1428HD GRANULATOR 18762

• Manufacturer: Battenfeld
• Model: Gloucester

Used Battenfeld Gloucester Model 1428HD Granulator having a 14” x 28” throat opening. Serial number1428-194. Three knife open rotor with slant cut is belt driven by a 200 HP Motor. Feed hopper modified for convey...

CINCINNATI 80mm TWIN SCREW EXTRUDER 18511

• Manufacturer: Cincinnati

Used Cincinnati model CMT80L-APC 80mm conical counter rotating twin screw plastic extruder. S/N 2040985/010. Screw length approximately 1,665mm long x 80mm diameter at the discharge. Has adapter plate that reduce...

ACTUAL AE-25/10/22 25MM PEDESTAL EXTRUDER 18705

One (1) used Actual model AE-25/10/22 25mm pedestal extruder. Having a 24:1 L/D ratio. Unit has a three (3) zone electrically heated, air cooled, non-vented barrel. Barrel can be raised or lowered and also tilts ...

DELTAPLAST 5 HP PEDESTAL EXTRUDER 18675

One (1) used 30mm Deltaplast model DVH 30.125:24 pedestal extruder. S/N WO281:1.91. Having a 24:1 L/D ratio. Unit has a three (3) zone electrically heated, air cooled, and non-vented barrel. Radicon (David Brown)...

DELTAPLAST 30MM 5 HP EXTRUDER 18678

One {1) used Deltaplast model D30:24:R 30mm extruder. S/N WO.29:79. Having a 24:1 L/D ratio at a 40.5″ centerline height. Unit has two (2) zone electrically heated, air cooled, non-vented barrel. Hamilton gearbox...

BRABENDER 3/4″ LAB EXTRUDER 18623

• Manufacturer: Brabender

Used C.W. Brabender Independent Table Top Extruder. S/N 1067/4. Type IND/EXTR/16-04-000. 3/4″ diameter 25:1 L/D ratio barrel. Four (4) zone temperature control panel. Extruder driven by a 1 HP D/C motor with SCR ...

CINCINNATI EXTRUSION 45MM EXTRUDER 18639

• Manufacturer: Cincinnati

Used Cincinnati Extrusion model Alpha 45-28G 45mm (1.77″) single screw extruder. S/N U2203. 28:1 L/D five (5) zone electrically heated, air cooled, and non-vented barrel at a 42″ centerline height. Hersteller Wat...

FULLY REBUILT BERINGER 12″ SCREEN 18492

Fresh fully rebuilt Beringer model 1200 Hydraulic screen plate screen changer. 12″ nominal breaker plates. 42″ center-line. With stand and 10 HP hydraulic power pack.2 Available – 2nd unit was put in service for ...

CLOEREN 53″ AUTO-GAUGE SHEET DIE 18355

One (1) used Cloeren Epoch AutoGauge sheet die with EDS having a 53″ slot opening. S/N 95-1380. Heavy duty body. Co-ex entrance. Integral upper flexible lip with auto adjustment. .000-.040 opening. External deckl...