Used processing

BERINGER NC-PVC-25 2.5″ SCREEN CHANGER 6395

Beringer model NC-PVC-25, 2.5″ screen changer. S/N 25NC15. Hydraulic power pack is not included.

CLOEREN EBR III 56″ WIDE 14425

Cloeren EBRIII, 56″ wide cast film die body, S/N 00-6613-17, 1.25″ X 4.75″ rectangular feed entry, 31 kW, 2,450 Lbs.Two are available.

EXTRUSION DIES, INC. 76″ ULTRAFLEX 12802

Extrusion Dies, Inc. 76″ Ultraflex H100 sheet die S/N 00-21320. 0.100″ lip opening 7 heater zones with eight 500 watt heaters each with 480V/3ph/60Hz operation. 1″ diameter center material entry. All flow areas a...

CLOEREN CO-EX BLOCK 14911

Cloeren co-ex block, S/N 97-1766-02, 4-3/4? x 1-1/2″ opening type: secector housing. Manufactured in June of 1997.

VETAPHONE CORONA PLUS CP1 1KW 15083

Vetaphone Corona Plus generator model CP1 1kW. Includes TF415 control and model HP1014C300 static unit, S/N 614600.

DAVIS STANDARD 165mm (6.5″) EXTRUDER 19033

• Manufacturer: Davis-Standard

One used (1) Davis Standard model 165MM60T 165mm (6.49″) extruder having a 34:1 L/D ratio with a nine (9) zone electrically heated, water cooled (closed loop), vented and plugged barrel at presently an 89″ center...

COPERIAN ZSK-40 40MM TWIN SCREW 18943

Used 40mm Coperion Type ZSK-40-Mega co-rotating twin screw extruder. S/N 07-3059. New in 2008. No barrels or screws included. Driven by 200 HP 1790 RPM A/C motor with Powerflight VFD controller. Has 1.155 gear ra...

DAVIS STANDARD 3.5″ 30:1 75 18867

• Manufacturer: Davis-Standard

One (1) used Davis Standard model 35IN35 extruder. S/N M3922. Shop order 05580. Extruder has 30:1 L/D ratio with a six (6) zone electrically heated, air cooled, and vented barrel at a 42″ center-line. Gearbox has...

EDI / NORSDON 50″ SHEET 18832

• Manufacturer: EDI

One (1) used Nordson/ Extrusion Dies Inc Model Ultra-100 heavy duty sheet die with a 50″ slot opening. Integral upper flexible lip and fixed removable lower lip. Adjusting bolts on 1″ centers. 45 degree restricto...

DAVIS STANDARD 8″ 900 HP 18828

• Manufacturer: Davis-Standard

Used Davis Standard Model 80IN80HT 8″ 32:1 L/D extruder having a seven (7) zone electrically, heated, water cooled (closed loop), and vented barrel at a 44″ center-line. S/N AA454. Shop Order 72635. Gearbox has a...

DAVIS STANDARD 75mm 32:1 L/D 18831

• Manufacturer: Davis-Standard

One (1) Used Davis Standard 75mm (2.95″) 32:1 L/D Model DSPW 75IN25 single screw extruder. S/N 72635. SO 80076. Barrel is six (6) zone electrically heated, water cooled(closed loop), and non-vented barrel at a 48...

4.5″ CRAMMER FEEDER 18765

One (1) Used Egan heavy duty crammer feeder having a nominal 4.5″ diameter screw. Screw is belt driven by a 30 hp dc motor through a Nuttal oversize gear reducer. Motor and gearbox have been updated. Includes ada...

MAAG 4″ CONTINUOUS SCREEN CHANGER 18509

• Manufacturer: Maag

Maag 4″ Continuous Screen Changer with Melt Pump. S/N 50125578-20. Consists of One (1) used Maag model CSC-096 screen changer having two (2) nominal 2.3.8″ breaker plates. Rated at 300-500 Kgs/hr (660-1100 pounds...

A&G EXTRUSION 30MM 3 HP 18677

• Manufacturer: A&G Mercury

One (1) used A & G Extrusion Model CE-30 30mm pedestal extruder. S/N 1380. Having a 20:1 L/D ratio. Unit has an electrically heated and non-vented barrel. Single blower on last zone of the barrel. Benzlers gearbo...

KILLION / WAYNE 1″ LAB 18656

One (1) used laboratory sheet line consisting of the following:Killion model KL-100 1″ 24:1 extruder. S/N 12809. Unit has a three (3) zone electrically heated, air cooled, top vented, and plugged barrel at a 42″ ...