Used processing

KILLION 1.250″ 30: 7.5 HP 16432

One used Killion model KN-125 1.25” 30:1 extruder having a four (4) zone electrically heated, air cooled, and non-vented barrel at approximately a 39″ centerline height. Gearbox is a Koellmann model PEZS-20 and h...

WAYNE 8″ X 5″ HORIZONTAL 16359

Wayne horizontal roll stack, S/N 9545. Five (5) 8″ wide x 5″ diameter rolls. Three (3) chrome and two (2) rubber. Each roll has a rotary union for cooling. Powered by two gearhead motors. Operator controls and on...

50″ EDI ULTRAFLEX SHEET DIE 16276

• Manufacturer: EDI

Extrusion Dies, Inc. Ultraflex 50″ U40 Sheet Die, S/N 97-19664. Rear 1.250″ diameter center back material entry with a 90 degree adapter. 0.001″ to 0.030″ lip opening. 0.750″ lip land. Five (5) 240V/1ph/60Hz heat...

CHROME ROLL 10″ X 36″ 16019

10″ diameter x 36″ chrome roll cored for water cooling.Two are available.

MELT PUMP SHV350-8A 12728

Melt pump model SHV350-8A, S/N 95226034-00001000. 15HP 500 volt 1,750 RPM DC motor. True 20:1 gearbox rated at up to 5.85HP maximum. Last used on a 3.5″ extruder.

GLOUCESTER 233-011 3.5″ EXTRUDER 12878

Gloucester 3.5″, 24:1 L/D extruder model number 233-011. S/N 233-19848-01. Electrically heated air cooled vented and plugged barrel on a 42.5″ centerline. Free standing eight zone control panel with temperature c...

WELEX TWO STAGE 4.5″ EXTRUDER 12344

• Manufacturer: Welex

Welex 4.5″ extruder screw, 2 stage 36:1 L/D, S/N 180359.

NEW / UN WELEX 4.5 12346

• Manufacturer: Welex

New chrome plated Welex 4.5″ extruder screw, S/N 18079. 36:1 L/D, 8″ long x 1″ wide, keyway 190.5″ overall length.

DAVIS STANDARD 4.5″ SINGLE STAGE 12018

• Manufacturer: Davis-Standard

Davis Standard 4.5″ single stage extruder screw. Approximately 28:1 L/D with four rows of mixing pins.

TWO STAGE EXTRUDER SCREW WITH 12021

Two stage extruder screw with dual mixing sections. Approximately 28:1 L/D. Single key shaft. Unknown manufacturer.

DAVIS STANDARD 4.5″ SINGLE STAGE 12022

• Manufacturer: Davis-Standard

Davis Standard 4.5″ single stage extruder screw. Approximately 30:1 L/D with three rows of mixing pins near the screw end.

4.5″ TWO STAGE EXTRUDER SCREW 12023

Two stage 4.5″ extruder screw with chrome plated mixing pins at the end of first stage. Approximately 28:1 L/D, single key shaft.

DAVIS STANDARD 2.5″ BARREL WITH 2023

• Manufacturer: Davis-Standard

Davis Standard 2.5″ extruder barrel. 24:1 L/D with Xalloy 800 liner. Barrel measures approximately 10-14 millimeters of wear.

DAVIS STANDARD 2.5″ EXTRUDER BARREL 7778

• Manufacturer: Davis-Standard

Davis Standard 2.5″ extruder barrel screw. 24:1 L/D.Three are available.

SENCORP FOAM EXTRUSION DIE 10856

Sencorp foam extrusion die. 2 x 3,000 watt 240-Volt heaters. Manufactured in March of 1998.