Used processing

DAVIS STANDARD 3.5″ 30:1 L/D 16399

• Manufacturer: Davis-Standard

Used Davis Standard model MV35IN35SR, 3.5″ extruder, S/N K2187, SO# 99878. 30:1 L/D barrel having a seven zone electrically heated and water cooled (closed loop) and side vented barrel at a 52″ centerline height....

KILLION 1″ 24:1 L/D EXTRUDER 16305

24:1 Killion pedestal extruder. S/N N6598 with a three (3) zone electrically heated air cooled barrel. Gearbox has a reduction ratio of 30:1 and is direct driven by a 3HP 1750/2050 RPM DC motor. Barrel can be rai...

NRM / DAVIS STANDARD 1.5″ 16125

• Manufacturer: Davis-Standard

NRM / Davis Standard 1.5″ Pacemaker IV extruder, S/N 19218, S/O 52660. 24:1 L/D air cooled electrically heated barrel with a 42″ to 44-3/4″ adjustable centerline. Driven by a 10 HP 1750/2300 RPM DC motor with Rel...

EGAN 3.5″ EXTRUDER 10949

• Manufacturer: Egan

Egan 3.5″ extruder, S/N JO0787808. 100HP 500-Volt DC motor into a belt driven 11.48:1 gearbox 30:1 L/D electrically heated water cooled vented and plugged barrel on a 65″ centerline. Gearbox is rated for 265HP ma...

GLOUCESTER 6″ EXTRUDER 12088

Gloucester 6″ extruder. No model number and no serial number. 30:1 L/D electrically heated water cooled 6 zone vented barrel with screw and clamp. No motor. 42″ center line 1HP 6″ x 11″ oval in-feed bridge breake...

UNK MFG 5″ SINGLE SCREW 12404

Unk Mfg. 5″ single screw extruder barrel, non-vented, 24:1 L/D, 8 bolt flange mount to gearbox. Threaded front of barrel to accept screen changer. Overall length is 134.5″ with 4.25″ end extension.

DAVIS STANDARD 3.5″ DOUBLE SPIRAL 12398

• Manufacturer: Davis-Standard

Davis Standard 3.5″ double spiral screw 32:1 L/D, 136″ overall length 12″ shank.Three are available.

WELEX 6″ EXTRUDER SCREW 12347

• Manufacturer: Welex

Welex 6″ extruder screw, S/N JF05444-000, 32:1 L/D, 2 stage, 216″ overall length.

6″ WELEX EXTRUDER SCREW 12350

• Manufacturer: Welex

6″ Welex extruder screw, S/N 144812, 32:1 L/D, 2 stage 216″ overall length. 9″ long x 1.5″ wide keyway.

TWO STAGE 4.5″ CHROME PLATED 12019

4.5″ chrome plated two stage extruder screw with mixing pins at the end of first stage. Approximately 28:1 L/D single key shaft. Unknown manufacturer.

DAVIS STANDARD SINGLE STAGE EXTRUDER 12020

• Manufacturer: Davis-Standard

4.5″ Davis Standard single stage extruder screw. Approximately 28:1 L/D with mixing pins at screw end.

3.5″ TWO STAGE EXTRUDER SCREW 12025

Two stage 3.5″ chrome plated extruder screw, approximately 24:1 L/D, dual mixing section and dual key shaft, unknown manufacturer.

3.5″ TWO STAGE EXTRUDER SCREW 12026

3.5″ two stage chrome plated extruder screw, approximately 24:1 L/D, dual mixing section and dual key shaft.

DAVIS STANDARD 3.5″ SINGLE STAGE 12028

• Manufacturer: Davis-Standard

Davis Standard 3.5″ chrome plated single stage extruder screw. Approximately 24:1 L/D. Four rows of mixing pins.

CLOEREN 3-WAY CO-EX BLOCK 14423

Cloeren 3-way co-ex block for 2.5″, 3.5″, and 5.25″ extruders. Manufactured in 2000. Never been used.Two units are available.